tangara-fw/src/drivers/gpios.cpp, branch main Tangara firmware Migrate to the new esp-idf I2C driver 2025-08-08T06:14:41+00:00 jacqueline me@jacqueline.id.au 2025-08-08T06:14:41+00:00 73baf2f88f61e307afd6cd17f6727da4e446b64c It's a better, less verbose driver, and also this fixes an occasional crash on boot. 
It's a better, less verbose driver, and also this fixes an occasional
crash on boot.
Isolate the SD card from the SPI bus when talking to the display (#176) 2025-01-10T02:17:11+00:00 jacqueline me@jacqueline.id.au 2025-01-10T02:17:11+00:00 94c30b759192231b8172bbb7d81125c8181261a1 This should help significantly with https://codeberg.org/cool-tech-zone/tangara-fw/issues/121, which seems to be caused by some SD cards being very picky about being the only SPI device on their bus. Co-authored-by: ailurux <ailuruxx@gmail.com> Reviewed-on: https://codeberg.org/cool-tech-zone/tangara-fw/pulls/176 Co-authored-by: jacqueline <me@jacqueline.id.au> Co-committed-by: jacqueline <me@jacqueline.id.au> 
This should help significantly with https://codeberg.org/cool-tech-zone/tangara-fw/issues/121, which seems to be caused by some SD cards being very picky about being the only SPI device on their bus.

Co-authored-by: ailurux <ailuruxx@gmail.com>
Reviewed-on: https://codeberg.org/cool-tech-zone/tangara-fw/pulls/176
Co-authored-by: jacqueline <me@jacqueline.id.au>
Co-committed-by: jacqueline <me@jacqueline.id.au>
Improve DAC power+mute management to reduce clicks and pops 2024-06-14T04:27:56+00:00 jacqueline me@jacqueline.id.au 2024-06-14T04:27:56+00:00 00b1ba58f0efca59e1ef2acbeab21849db4faafe 






move driver includes into a subdir as well
2024-05-02T11:52:59+00:00

jacqueline
me@jacqueline.id.au

2024-05-02T11:52:59+00:00

26eb580043ad176bdc58d996f30d470e1073ef00












Start using the lock switch polarity bit in nvs
2024-03-20T00:43:33+00:00

jacqueline
me@jacqueline.id.au

2024-03-20T00:43:33+00:00

a05d93a1e26181237a76da5ce398c6b08497d591












bringup r8 muting
2024-01-09T03:17:58+00:00

jacqueline
me@jacqueline.id.au

2024-01-09T03:17:58+00:00

09eacb71f0740dba94345ce452d7c4a2c9cdd47f












Periodically check int lines instead of relying on interrupts
2023-11-23T20:41:48+00:00

jacqueline
me@jacqueline.id.au

2023-11-23T20:18:14+00:00

230721cd6271f3239b42e1d2471f8db15bebd712












Use a non-IRAM-safe interrupt for gpio changes
2023-11-20T05:05:53+00:00

jacqueline
me@jacqueline.id.au

2023-11-20T05:05:53+00:00

5c7f07e638c50a7b063009718f8ab35c0ce7fa44

AFAICT this *should* be IRAM-safe, but there's an xQueueReceiveGeneric
within esp-idf that doesn't appear to be allocated internally





AFAICT this *should* be IRAM-safe, but there's an xQueueReceiveGeneric
within esp-idf that doesn't appear to be allocated internally







Ensure the GPIO ISR is in IRAM
2023-11-07T03:46:32+00:00

jacqueline
me@jacqueline.id.au

2023-11-07T03:46:32+00:00

2b19e5703401f9af3dacda09bf4b8552e5f8832f

The shared interrupt is flagged as IRAM-capable, so this handler should
be too.





The shared interrupt is flagged as IRAM-capable, so this handler should
be too.







Add interrupts for samd changes
2023-08-18T05:40:24+00:00

jacqueline
me@jacqueline.id.au

2023-08-18T05:40:24+00:00

cad70605401e8fa30811e8c68a0cc5c014438942