Fork ESP-IDF's bluetooth component

i want better sbc encoding, and no cla will stop me

1 files changed, 167 insertions, 0 deletions

diff --git a/lib/bt/controller/esp32/hli_api.h b/lib/bt/controller/esp32/hli_api.h
new file mode 100644
index 00000000..3b69156b
--- /dev/null
+++ b/lib/bt/controller/esp32/hli_api.h
@@ -0,0 +1,167 @@
+/*
+ * SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include "esp_err.h"
+#include "esp_intr_alloc.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/queue.h"
+#include "freertos/semphr.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if CONFIG_BTDM_CTRL_HLI
+
+/*** Queues ***/
+
+struct hli_queue_t
+{
+    size_t elem_size;
+    char* begin;
+    char* end;
+    const char* bufend;
+    QueueHandle_t downstream;
+    int flags;
+    char buf[0];
+};
+
+/**
+ * @brief Register a high level interrupt function
+ *
+ * @param handler  interrupt handler function
+ * @param arg      argument to pass to the interrupt handler
+ * @param intr_reg   address of the peripheral register containing the interrupt status,
+ *                   or value 0 to get the status from CPU INTERRUPT register
+ * @param intr_mask  mask of the interrupt, in the interrupt status register
+ * @return
+ *      - ESP_OK on success
+ *      - ESP_ERR_NO_MEM if too many handlers are registered
+ */
+esp_err_t hli_intr_register(intr_handler_t handler, void* arg, uint32_t intr_reg, uint32_t intr_mask);
+
+/**
+ * @brief Mask all interrupts (including high level ones) on the current CPU
+ *
+ * @return uint32_t interrupt status, pass it to hli_intr_restore
+ */
+uint32_t hli_intr_disable(void);
+
+/**
+ * @brief Re-enable interrupts
+ *
+ * @param state value returned by hli_intr_disable
+ */
+void hli_intr_restore(uint32_t state);
+
+/**
+ * @brief Type of a hli queue
+ */
+typedef struct hli_queue_t* hli_queue_handle_t;
+
+/**
+ * @brief Initialize hli_queue module. Must be called once before using hli queue APIs.
+ */
+void hli_queue_setup(void);
+
+/**
+ * @brief Shutdown hli_queue module.
+ */
+void hli_queue_shutdown(void);
+
+/**
+ * @brief Create a hli queue, wrapping a FreeRTOS queue
+ *
+ * This queue can be used from high level interrupts,
+ * but **ONLY ON THE CPU WHERE hli_queue_setup WAS CALLED**. Values sent to this
+ * queue are automatically forwarded to "downstream" FreeRTOS queue using a level 3
+ * software interrupt.
+ *
+ * @param nelem  number of elements in the queue
+ * @param elem_size  size of one element; must match element size of a downstream queue
+ * @param downstream  FreeRTOS queue to send the values to
+ * @return hli_queue_handle_t  handle of the created queue, or NULL on failure
+ */
+hli_queue_handle_t hli_queue_create(size_t nelem, size_t elem_size, QueueHandle_t downstream);
+
+/**
+ * @brief Create a customer hli queue, wrapping a FreeRTOS queue
+ *
+ * This queue can be used from high level interrupts,
+ * but **ONLY ON THE CPU WHERE hli_queue_setup WAS CALLED**. Values sent to this
+ * queue are automatically forwarded to "downstream" FreeRTOS queue using a level 3
+ * software interrupt.
+ *
+ * @param nelem  number of elements in the queue
+ * @param elem_size  size of one element; must match element size of a downstream queue
+ * @param downstream  FreeRTOS queue to send the values to
+ * @return hli_queue_handle_t  handle of the created queue, or NULL on failure
+ */
+hli_queue_handle_t hli_customer_queue_create(size_t nelem, size_t elem_size, QueueHandle_t downstream);
+
+/**
+ * @brief Create a hli queue, wrapping a FreeRTOS semaphore
+ *
+ * See notes on hli_queue_create.
+ *
+ * @param max_count  maximum semaphore count
+ * @param downstream  FreeRTOS semaphore to forward the calls to
+ * @return hli_queue_handle_t  handle of the created queue, or NULL on failure
+ */
+hli_queue_handle_t hli_semaphore_create(size_t max_count, SemaphoreHandle_t downstream);
+
+/**
+ * @brief Delete a hli queue
+ *
+ * Make sure noone is using the queue before deleting it.
+ *
+ * @param queue  handle returned by hli_queue_create or hli_semaphore_create
+ */
+void hli_queue_delete(hli_queue_handle_t queue);
+
+/**
+ * @brief Get one element from a hli queue
+ *
+ * Usually not used, values get sent to a downstream FreeRTOS queue automatically.
+ * However if downstream queue is NULL, this API can be used to get values from a hli queue.
+ *
+ * @param queue  handle of a queue
+ * @param out  pointer where to store the element
+ * @return true if the element was successfully read from the queue
+ */
+bool hli_queue_get(hli_queue_handle_t queue, void* out);
+
+/**
+ * @brief Put one element into a hli queue
+ *
+ * This puts copies an element into the queue and raises a software interrupt (level 3).
+ * In the interrupt, the value is copied to a FreeRTOS "downstream" queue.
+ *
+ * Note that if the value does not fit into a downstream queue, no error is returned,
+ * and the value is lost.
+ *
+ * @param queue handle of a queue
+ * @param data  pointer to the element to be sent
+ * @return true if data was placed into the hli queue successfully
+ */
+bool hli_queue_put(hli_queue_handle_t queue, const void* data);
+
+/**
+ * @brief "Give" a semaphore wrapped by a hli queue
+ *
+ * @param queue  handle returned by hli_semaphore_create
+ * @return true  if the event was sent to a hli queue successfully
+ */
+bool hli_semaphore_give(hli_queue_handle_t queue);
+
+#endif /* CONFIG_BTDM_CTRL_HLI */
+
+#ifdef __cplusplus
+}
+#endif