diff options
| author | jacqueline <me@jacqueline.id.au> | 2024-03-28 14:32:49 +1100 |
|---|---|---|
| committer | jacqueline <me@jacqueline.id.au> | 2024-03-28 14:32:49 +1100 |
| commit | ee29c25b29eaa4fac4e897442634b69ecc8d8125 (patch) | |
| tree | 8c5f1a140463f20f104316fa3492984e191154e9 /lib/bt/host/bluedroid/common/include | |
| parent | 239e6d89507a24c849385f4bfa93ac4ad58e5de5 (diff) | |
| download | tangara-fw-ee29c25b29eaa4fac4e897442634b69ecc8d8125.tar.gz | |
Fork ESP-IDF's bluetooth component
i want better sbc encoding, and no cla will stop me
Diffstat (limited to 'lib/bt/host/bluedroid/common/include')
8 files changed, 4090 insertions, 0 deletions
diff --git a/lib/bt/host/bluedroid/common/include/common/bluedroid_user_config.h b/lib/bt/host/bluedroid/common/include/common/bluedroid_user_config.h new file mode 100644 index 00000000..ce8e80a2 --- /dev/null +++ b/lib/bt/host/bluedroid/common/include/common/bluedroid_user_config.h @@ -0,0 +1,513 @@ +/* + * SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __BLUEDROID_USER_CONFIG_H__ +#define __BLUEDROID_USER_CONFIG_H__ + +/* All the configuration from SDK defined here */ +#include "bt_common.h" +#include "bt_user_config.h" +#include "soc/soc_caps.h" + +/********************************************************** + * Thread/Task reference + **********************************************************/ +#ifdef CONFIG_BT_BTU_TASK_STACK_SIZE +#define UC_BTU_TASK_STACK_SIZE CONFIG_BT_BTU_TASK_STACK_SIZE +#else +#define UC_BTU_TASK_STACK_SIZE 4096 +#endif + + +/********************************************************** + * Profile reference + **********************************************************/ +//Classic BT reference +#ifdef CONFIG_BT_CLASSIC_ENABLED +#define UC_BT_CLASSIC_ENABLED CONFIG_BT_CLASSIC_ENABLED +#else +#define UC_BT_CLASSIC_ENABLED FALSE +#endif + +//A2DP +#ifdef CONFIG_BT_A2DP_ENABLE +#define UC_BT_A2DP_ENABLED CONFIG_BT_A2DP_ENABLE +#else +#define UC_BT_A2DP_ENABLED FALSE +#endif + +//SPP +#ifdef CONFIG_BT_SPP_ENABLED +#define UC_BT_SPP_ENABLED CONFIG_BT_SPP_ENABLED +#else +#define UC_BT_SPP_ENABLED FALSE +#endif + +//L2CAP +#ifdef CONFIG_BT_L2CAP_ENABLED +#define UC_BT_L2CAP_ENABLED CONFIG_BT_L2CAP_ENABLED +#else +#define UC_BT_L2CAP_ENABLED FALSE +#endif + +//HFP(AG) +#ifdef CONFIG_BT_HFP_AG_ENABLE +#define UC_BT_HFP_AG_ENABLED CONFIG_BT_HFP_AG_ENABLE +#else +#define UC_BT_HFP_AG_ENABLED FALSE +#endif + +//HFP(Client) +#ifdef CONFIG_BT_HFP_CLIENT_ENABLE +#define UC_BT_HFP_CLIENT_ENABLED CONFIG_BT_HFP_CLIENT_ENABLE +#else +#define UC_BT_HFP_CLIENT_ENABLED FALSE +#endif + +//HID +#ifdef CONFIG_BT_HID_ENABLED +#define UC_BT_HID_ENABLED CONFIG_BT_HID_ENABLED +#else +#define UC_BT_HID_ENABLED FALSE +#endif + +//HID HOST(BT) +#ifdef CONFIG_BT_HID_HOST_ENABLED +#define UC_BT_HID_HOST_ENABLED CONFIG_BT_HID_HOST_ENABLED +#else +#define UC_BT_HID_HOST_ENABLED FALSE +#endif + +//HID Device(BT) +#ifdef CONFIG_BT_HID_DEVICE_ENABLED +#define UC_BT_HID_DEVICE_ENABLED CONFIG_BT_HID_DEVICE_ENABLED +#else +#define UC_BT_HID_DEVICE_ENABLED FALSE +#endif + +//BQB(BT) +#ifdef CONFIG_BT_CLASSIC_BQB_ENABLED +#define UC_BT_CLASSIC_BQB_ENABLED CONFIG_BT_CLASSIC_BQB_ENABLED +#else +#define UC_BT_CLASSIC_BQB_ENABLED FALSE +#endif + +//BLE +#ifdef CONFIG_BT_BLE_ENABLED +#define UC_BT_BLE_ENABLED CONFIG_BT_BLE_ENABLED +#else +#define UC_BT_BLE_ENABLED FALSE +#endif + +#ifdef CONFIG_BT_BLE_RPA_SUPPORTED +#define UC_BT_BLE_RPA_SUPPORTED CONFIG_BT_BLE_RPA_SUPPORTED +#else +#if (CONFIG_BT_CONTROLLER_ENABLED && SOC_BLE_DEVICE_PRIVACY_SUPPORTED) +#define UC_BT_BLE_RPA_SUPPORTED TRUE +#else +#define UC_BT_BLE_RPA_SUPPORTED FALSE +#endif +#endif + +#ifdef CONFIG_BT_BLE_50_FEATURES_SUPPORTED +#define UC_BT_BLE_50_FEATURES_SUPPORTED CONFIG_BT_BLE_50_FEATURES_SUPPORTED +#else +#define UC_BT_BLE_50_FEATURES_SUPPORTED FALSE +#endif + +#ifdef CONFIG_BT_BLE_42_FEATURES_SUPPORTED +#define UC_BT_BLE_42_FEATURES_SUPPORTED CONFIG_BT_BLE_42_FEATURES_SUPPORTED +#else +#define UC_BT_BLE_42_FEATURES_SUPPORTED FALSE +#endif + +#ifdef CONFIG_BT_BLE_FEAT_PERIODIC_ADV_SYNC_TRANSFER +#define UC_BT_BLE_FEAT_PERIODIC_ADV_SYNC_TRANSFER CONFIG_BT_BLE_FEAT_PERIODIC_ADV_SYNC_TRANSFER +#else +#define UC_BT_BLE_FEAT_PERIODIC_ADV_SYNC_TRANSFER FALSE +#endif + +#ifdef CONFIG_BT_BLE_FEAT_PERIODIC_ADV_ENH +#define UC_BT_BLE_FEAT_PERIODIC_ADV_ENH CONFIG_BT_BLE_FEAT_PERIODIC_ADV_ENH +#else +#define UC_BT_BLE_FEAT_PERIODIC_ADV_ENH FALSE +#endif + +#ifdef CONFIG_BT_BLE_FEAT_CREATE_SYNC_ENH +#define UC_BT_BLE_FEAT_CREATE_SYNC_ENH CONFIG_BT_BLE_FEAT_CREATE_SYNC_ENH +#else +#define UC_BT_BLE_FEAT_CREATE_SYNC_ENH FALSE +#endif + +#ifdef CONFIG_BT_BLE_HIGH_DUTY_ADV_INTERVAL +#define UC_BT_BLE_HIGH_DUTY_ADV_INTERVAL CONFIG_BT_BLE_HIGH_DUTY_ADV_INTERVAL +#else +#define UC_BT_BLE_HIGH_DUTY_ADV_INTERVAL FALSE +#endif + +//GATTS +#ifdef CONFIG_BT_GATTS_ENABLE +#define UC_BT_GATTS_ENABLE CONFIG_BT_GATTS_ENABLE +#else +#define UC_BT_GATTS_ENABLE FALSE +#endif + +//GATTC +#ifdef CONFIG_BT_GATTC_ENABLE +#define UC_BT_GATTC_ENABLE CONFIG_BT_GATTC_ENABLE +#else +#define UC_BT_GATTC_ENABLE FALSE +#endif + +//GATTC CACHE +#ifdef CONFIG_BT_GATTC_MAX_CACHE_CHAR +#define UC_BT_GATTC_MAX_CACHE_CHAR CONFIG_BT_GATTC_MAX_CACHE_CHAR +#else +#define UC_BT_GATTC_MAX_CACHE_CHAR 40 +#endif + +//GATTC NOTIF +#ifdef CONFIG_BT_GATTC_NOTIF_REG_MAX +#define UC_BT_GATTC_NOTIF_REG_MAX CONFIG_BT_GATTC_NOTIF_REG_MAX +#else +#define UC_BT_GATTC_NOTIF_REG_MAX 5 +#endif + +#ifdef CONFIG_BT_GATTC_CACHE_NVS_FLASH +#define UC_BT_GATTC_CACHE_NVS_FLASH_ENABLED CONFIG_BT_GATTC_CACHE_NVS_FLASH +#else +#define UC_BT_GATTC_CACHE_NVS_FLASH_ENABLED FALSE +#endif + +#ifdef CONFIG_BT_GATTC_CONNECT_RETRY_COUNT +#define UC_BT_GATTC_CONNECT_RETRY_COUNT CONFIG_BT_GATTC_CONNECT_RETRY_COUNT +#else +#define UC_BT_GATTC_CONNECT_RETRY_COUNT 0 +#endif + + +//SMP +#ifdef CONFIG_BT_SMP_ENABLE +#define UC_BT_SMP_ENABLE CONFIG_BT_SMP_ENABLE +#else +#define UC_BT_SMP_ENABLE FALSE +#endif + +//SMP_SLAVE_CON_PARAMS_UPD_ENABLE +#ifdef CONFIG_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE +#define UC_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE CONFIG_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE +#else +#define UC_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE FALSE +#endif + +#ifdef CONFIG_BT_SMP_MAX_BONDS +#define UC_BT_SMP_MAX_BONDS CONFIG_BT_SMP_MAX_BONDS +#else +#define UC_BT_SMP_MAX_BONDS 8 +#endif + +//Device Nane Maximum Length +#ifdef CONFIG_BT_MAX_DEVICE_NAME_LEN +#define UC_MAX_LOC_BD_NAME_LEN CONFIG_BT_MAX_DEVICE_NAME_LEN +#else +#define UC_MAX_LOC_BD_NAME_LEN 64 +#endif + +#if CONFIG_IDF_TARGET_ESP32 + +//BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP +#ifdef CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP +#define UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP +#else +#define UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP FALSE +#endif + +//SMP_SLAVE_CON_PARAMS_UPD_ENABLE +#ifdef CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM +#define UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM +#else +#define UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM 100 +#endif + +//BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP +#ifdef CONFIG_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD +#define UC_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD CONFIG_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD +#else +#define UC_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD 20 +#endif + +#endif //CONFIG_IDF_TARGET_ESP32 + +#if (CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32C6 || CONFIG_IDF_TARGET_ESP32H2 || CONFIG_IDF_TARGET_ESP32C2) +//BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP +#ifdef CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP +#define UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP +#else +#define UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP FALSE +#endif + +//SMP_SLAVE_CON_PARAMS_UPD_ENABLE +#ifdef CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM +#define UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM +#else +#define UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM 100 +#endif + +//BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP +#ifdef CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD +#define UC_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD +#else +#define UC_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD 20 +#endif + +#endif //(CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32C6 || CONFIG_IDF_TARGET_ESP32H2 || CONFIG_IDF_TARGET_ESP32C2) + +//BT ACL CONNECTIONS +#ifdef CONFIG_BT_ACL_CONNECTIONS +#define UC_BT_ACL_CONNECTIONS CONFIG_BT_ACL_CONNECTIONS +#else +#define UC_BT_ACL_CONNECTIONS 5 +#endif + +#ifdef CONFIG_BT_MULTI_CONNECTION_ENBALE +#define UC_BT_MULTI_CONNECTION_ENBALE CONFIG_BT_MULTI_CONNECTION_ENBALE +#else +#define UC_BT_MULTI_CONNECTION_ENBALE FALSE +#endif + +//BT_BLE_ESTAB_LINK_CONN_TOUT +#ifdef CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT +#define UC_BT_BLE_ESTAB_LINK_CONN_TOUT CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT +#else +#define UC_BT_BLE_ESTAB_LINK_CONN_TOUT 30 +#endif + + +//HOST QUEUE CONGEST CHECK +#ifdef CONFIG_BT_BLE_HOST_QUEUE_CONGESTION_CHECK +#define UC_BT_BLE_HOST_QUEUE_CONGESTION_CHECK CONFIG_BT_BLE_HOST_QUEUE_CONGESTION_CHECK +#else +#define UC_BT_BLE_HOST_QUEUE_CONGESTION_CHECK FALSE +#endif + +#ifdef CONFIG_BT_GATTS_PPCP_CHAR_GAP +#define UC_CONFIG_BT_GATTS_PPCP_CHAR_GAP CONFIG_BT_GATTS_PPCP_CHAR_GAP +#else +#define UC_CONFIG_BT_GATTS_PPCP_CHAR_GAP FALSE +#endif + + +#ifdef CONFIG_BT_GATT_MAX_SR_PROFILES +#define UC_CONFIG_BT_GATT_MAX_SR_PROFILES CONFIG_BT_GATT_MAX_SR_PROFILES +#else +#define UC_CONFIG_BT_GATT_MAX_SR_PROFILES 8 +#endif + +#ifdef CONFIG_BT_GATT_MAX_SR_ATTRIBUTES +#define UC_CONFIG_BT_GATT_MAX_SR_ATTRIBUTES CONFIG_BT_GATT_MAX_SR_ATTRIBUTES +#else +#define UC_CONFIG_BT_GATT_MAX_SR_ATTRIBUTES 100 +#endif + +#ifdef CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE +#define UC_BT_GATTS_SEND_SERVICE_CHANGE_MODE CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE +#else +#define UC_BT_GATTS_SEND_SERVICE_CHANGE_MODE 0 +#endif + +#ifdef CONFIG_BT_GATTS_ROBUST_CACHING_ENABLED +#define UC_BT_GATTS_ROBUST_CACHING_ENABLED CONFIG_BT_GATTS_ROBUST_CACHING_ENABLED +#else +#define UC_BT_GATTS_ROBUST_CACHING_ENABLED FALSE +#endif + +#ifdef CONFIG_BT_GATTS_DEVICE_NAME_WRITABLE +#define UC_BT_GATTS_DEVICE_NAME_WRITABLE CONFIG_BT_GATTS_DEVICE_NAME_WRITABLE +#else +#define UC_BT_GATTS_DEVICE_NAME_WRITABLE FALSE +#endif + +#ifdef CONFIG_BT_GATTS_APPEARANCE_WRITABLE +#define UC_BT_GATTS_APPEARANCE_WRITABLE CONFIG_BT_GATTS_APPEARANCE_WRITABLE +#else +#define UC_BT_GATTS_APPEARANCE_WRITABLE FALSE +#endif + +#ifdef CONFIG_BT_BLE_ACT_SCAN_REP_ADV_SCAN +#define UC_BT_BLE_ACT_SCAN_REP_ADV_SCAN CONFIG_BT_BLE_ACT_SCAN_REP_ADV_SCAN +#else +#define UC_BT_BLE_ACT_SCAN_REP_ADV_SCAN FALSE +#endif + +#ifdef CONFIG_BT_BLE_RPA_TIMEOUT +#define UC_BT_BLE_RPA_TIMEOUT CONFIG_BT_BLE_RPA_TIMEOUT +#else +#define UC_BT_BLE_RPA_TIMEOUT 900 +#endif + +//SCO VOICE OVER HCI +#ifdef CONFIG_BT_HFP_AUDIO_DATA_PATH_HCI +#define UC_BT_HFP_AUDIO_DATA_PATH_HCI CONFIG_BT_HFP_AUDIO_DATA_PATH_HCI +#else +#define UC_BT_HFP_AUDIO_DATA_PATH_HCI FALSE +#endif + +//Wide Band Speech +#ifdef CONFIG_BT_HFP_WBS_ENABLE +#define UC_BT_HFP_WBS_ENABLE CONFIG_BT_HFP_WBS_ENABLE +#else +#define UC_BT_HFP_WBS_ENABLE FALSE +#endif + +/********************************************************** + * Memory reference + **********************************************************/ + +//MEMORY ALLOCATOR +#ifdef CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST +#define UC_HEAP_ALLOCATION_FROM_SPIRAM_FIRST CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST +#else +#define UC_HEAP_ALLOCATION_FROM_SPIRAM_FIRST FALSE +#endif + +//MEMORY DEBUG +#ifdef CONFIG_BT_BLUEDROID_MEM_DEBUG +#define UC_BT_BLUEDROID_MEM_DEBUG CONFIG_BT_BLUEDROID_MEM_DEBUG +#else +#define UC_BT_BLUEDROID_MEM_DEBUG FALSE +#endif + +//ESP COEXIST VSC +#ifdef CONFIG_BT_BLUEDROID_ESP_COEX_VSC +#define UC_BT_BLUEDROID_ESP_COEX_VSC CONFIG_BT_BLUEDROID_ESP_COEX_VSC +#else +#define UC_BT_BLUEDROID_ESP_COEX_VSC FALSE +#endif + + +/********************************************************** + * Trace reference + **********************************************************/ + +#ifdef CONFIG_BT_LOG_HCI_TRACE_LEVEL +#define UC_BT_LOG_HCI_TRACE_LEVEL CONFIG_BT_LOG_HCI_TRACE_LEVEL +#else +#define UC_BT_LOG_HCI_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_BTM_TRACE_LEVEL +#define UC_BT_LOG_BTM_TRACE_LEVEL CONFIG_BT_LOG_BTM_TRACE_LEVEL +#else +#define UC_BT_LOG_BTM_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_L2CAP_TRACE_LEVEL +#define UC_BT_LOG_L2CAP_TRACE_LEVEL CONFIG_BT_LOG_L2CAP_TRACE_LEVEL +#else +#define UC_BT_LOG_L2CAP_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL +#define UC_BT_LOG_RFCOMM_TRACE_LEVEL CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL +#else +#define UC_BT_LOG_RFCOMM_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_SDP_TRACE_LEVEL +#define UC_BT_LOG_SDP_TRACE_LEVEL CONFIG_BT_LOG_SDP_TRACE_LEVEL +#else +#define UC_BT_LOG_SDP_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_GAP_TRACE_LEVEL +#define UC_BT_LOG_GAP_TRACE_LEVEL CONFIG_BT_LOG_GAP_TRACE_LEVEL +#else +#define UC_BT_LOG_GAP_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_BNEP_TRACE_LEVEL +#define UC_BT_LOG_BNEP_TRACE_LEVEL CONFIG_BT_LOG_BNEP_TRACE_LEVEL +#else +#define UC_BT_LOG_BNEP_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_PAN_TRACE_LEVEL +#define UC_BT_LOG_PAN_TRACE_LEVEL CONFIG_BT_LOG_PAN_TRACE_LEVEL +#else +#define UC_BT_LOG_PAN_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_A2D_TRACE_LEVEL +#define UC_BT_LOG_A2D_TRACE_LEVEL CONFIG_BT_LOG_A2D_TRACE_LEVEL +#else +#define UC_BT_LOG_A2D_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_AVDT_TRACE_LEVEL +#define UC_BT_LOG_AVDT_TRACE_LEVEL CONFIG_BT_LOG_AVDT_TRACE_LEVEL +#else +#define UC_BT_LOG_AVDT_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_AVCT_TRACE_LEVEL +#define UC_BT_LOG_AVCT_TRACE_LEVEL CONFIG_BT_LOG_AVCT_TRACE_LEVEL +#else +#define UC_BT_LOG_AVCT_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_AVRC_TRACE_LEVEL +#define UC_BT_LOG_AVRC_TRACE_LEVEL CONFIG_BT_LOG_AVRC_TRACE_LEVEL +#else +#define UC_BT_LOG_AVRC_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_MCA_TRACE_LEVEL +#define UC_BT_LOG_MCA_TRACE_LEVEL CONFIG_BT_LOG_MCA_TRACE_LEVEL +#else +#define UC_BT_LOG_MCA_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_HID_TRACE_LEVEL +#if UC_BT_HID_HOST_ENABLED +#define UC_BT_LOG_HIDH_TRACE_LEVEL CONFIG_BT_LOG_HID_TRACE_LEVEL +#endif +#if UC_BT_HID_DEVICE_ENABLED +#define UC_BT_LOG_HIDD_TRACE_LEVEL CONFIG_BT_LOG_HID_TRACE_LEVEL +#endif +#else +#if UC_BT_HID_HOST_ENABLED +#define UC_BT_LOG_HIDH_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif +#if UC_BT_HID_DEVICE_ENABLED +#define UC_BT_LOG_HIDD_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif +#endif + +#ifdef CONFIG_BT_LOG_APPL_TRACE_LEVEL +#define UC_BT_LOG_APPL_TRACE_LEVEL CONFIG_BT_LOG_APPL_TRACE_LEVEL +#else +#define UC_BT_LOG_APPL_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_GATT_TRACE_LEVEL +#define UC_BT_LOG_GATT_TRACE_LEVEL CONFIG_BT_LOG_GATT_TRACE_LEVEL +#else +#define UC_BT_LOG_GATT_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_SMP_TRACE_LEVEL +#define UC_BT_LOG_SMP_TRACE_LEVEL CONFIG_BT_LOG_SMP_TRACE_LEVEL +#else +#define UC_BT_LOG_SMP_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#ifdef CONFIG_BT_LOG_BTIF_TRACE_LEVEL +#define UC_BT_LOG_BTIF_TRACE_LEVEL CONFIG_BT_LOG_BTIF_TRACE_LEVEL +#else +#define UC_BT_LOG_BTIF_TRACE_LEVEL UC_TRACE_LEVEL_WARNING +#endif + +#endif /* __BLUEDROID_USER_CONFIG_H__ */ diff --git a/lib/bt/host/bluedroid/common/include/common/bt_common_types.h b/lib/bt/host/bluedroid/common/include/common/bt_common_types.h new file mode 100644 index 00000000..7b96579e --- /dev/null +++ b/lib/bt/host/bluedroid/common/include/common/bt_common_types.h @@ -0,0 +1,35 @@ +/* + * SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + + + + + +#ifndef _BT_COMMON_TYPES_H_ +#define _BT_COMMON_TYPES_H_ + +#include "common/bt_defs.h" +#include "osi/thread.h" + +typedef void (* bluedroid_init_done_cb_t)(void); + +typedef struct { + uint8_t client_if; + uint8_t filt_index; + uint8_t advertiser_state; + uint8_t advertiser_info_present; + uint8_t addr_type; + uint8_t tx_power; + int8_t rssi_value; + uint16_t time_stamp; + bt_bdaddr_t bd_addr; + uint8_t adv_pkt_len; + uint8_t *p_adv_pkt_data; + uint8_t scan_rsp_len; + uint8_t *p_scan_rsp_data; +} btgatt_track_adv_info_t; + +#endif diff --git a/lib/bt/host/bluedroid/common/include/common/bt_defs.h b/lib/bt/host/bluedroid/common/include/common/bt_defs.h new file mode 100644 index 00000000..b10e2efa --- /dev/null +++ b/lib/bt/host/bluedroid/common/include/common/bt_defs.h @@ -0,0 +1,65 @@ +/* + * SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +/** + * common/bt_defs.h Defines useful API for whole Bluedroid + * + */ +#ifndef _BT_DEFS_H_ +#define _BT_DEFS_H_ + +#include <stdlib.h> +#include <stdint.h> +#include <arpa/inet.h> +#include "bt_common.h" +#include "common/bt_target.h" + +#define UNUSED(x) (void)(x) + +/*Timer Related Defination*/ + +//by Snake.T +typedef void (TIMER_CBACK)(void *p_tle); +typedef struct _tle { + struct _tle *p_next; + struct _tle *p_prev; + TIMER_CBACK *p_cback; + INT32 ticks; + INT32 ticks_initial; + TIMER_PARAM_TYPE param; + TIMER_PARAM_TYPE data; + UINT16 event; + UINT8 in_use; +} TIMER_LIST_ENT; + +#define alarm_timer_t uint32_t +#define alarm_timer_setfn(timer, cb, data) \ +do { \ +} while (0) +#define alarm_timer_arm(timer, to, periodic) \ +do { \ +} while (0) +#define alarm_timer_disarm(timer) \ +do { \ +} while (0) +#define alarm_timer_now() (0) + + +/*Bluetooth Address*/ +typedef struct { + uint8_t address[6]; +} __attribute__ ((__packed__)) bt_bdaddr_t; + +/** Bluetooth 128-bit UUID */ +typedef struct { + uint8_t uu[16]; +} bt_uuid_t; + +#ifndef CPU_LITTLE_ENDIAN +#define CPU_LITTLE_ENDIAN +#endif + +#endif /* _BT_DEFS_H_ */ diff --git a/lib/bt/host/bluedroid/common/include/common/bt_target.h b/lib/bt/host/bluedroid/common/include/common/bt_target.h new file mode 100644 index 00000000..b193805d --- /dev/null +++ b/lib/bt/host/bluedroid/common/include/common/bt_target.h @@ -0,0 +1,2378 @@ +/****************************************************************************** + * + * Copyright (c) 2014 The Android Open Source Project + * Copyright (C) 1999-2012 Broadcom Corporation + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ + +#ifndef BT_TARGET_H +#define BT_TARGET_H + +#include <bt_common.h> + +#ifndef BUILDCFG +#define BUILDCFG +#endif + +/* +#if !defined(HAS_BDROID_BUILDCFG) && !defined(HAS_NO_BDROID_BUILDCFG) +#error "An Android.mk file did not include bdroid_CFLAGS and possibly not bdorid_C_INCLUDES" +#endif +*/ + +#ifdef HAS_BDROID_BUILDCFG +#include "bdroid_buildcfg.h" +#endif + +#include "bluedroid_user_config.h" +#include "stack/bt_types.h" /* This must be defined AFTER buildcfg.h */ + +#include "stack/dyn_mem.h" /* defines static and/or dynamic memory for components */ + + +/* OS Configuration from User config (eg: sdkconfig) */ +#define BT_BTU_TASK_STACK_SIZE UC_BTU_TASK_STACK_SIZE + +#if (UC_BT_BLUEDROID_ESP_COEX_VSC == TRUE) +#define ESP_COEX_VSC_INCLUDED TRUE +#else +#define ESP_COEX_VSC_INCLUDED FALSE +#endif + +#if (UC_BT_CONTROLLER_INCLUDED == TRUE) +#define BT_CONTROLLER_INCLUDED TRUE +#else +#define BT_CONTROLLER_INCLUDED FALSE +#endif + +/****************************************************************************** +** +** Classic BT features +** +******************************************************************************/ +#if (UC_BT_CLASSIC_ENABLED == TRUE) +#define CLASSIC_BT_INCLUDED TRUE +#define BTC_SM_INCLUDED TRUE +#define BTC_PRF_QUEUE_INCLUDED TRUE +#define BTC_GAP_BT_INCLUDED TRUE +#define BTA_SDP_INCLUDED TRUE +#define BTA_DM_PM_INCLUDED TRUE +#define BTC_DM_PM_INCLUDED TRUE +#define SDP_INCLUDED TRUE +#define BTA_DM_QOS_INCLUDED TRUE + +#if (UC_BT_A2DP_ENABLED == TRUE) +#define BTA_AR_INCLUDED TRUE +#define BTA_AV_INCLUDED TRUE +#define AVDT_INCLUDED TRUE +#define A2D_INCLUDED TRUE +#define AVCT_INCLUDED TRUE +#define AVRC_INCLUDED TRUE +#define BTC_AV_INCLUDED TRUE +#define BTA_AV_SINK_INCLUDED TRUE +#define BTC_AV_SINK_INCLUDED TRUE +#define SBC_DEC_INCLUDED TRUE +#define BTC_AV_SRC_INCLUDED TRUE +#define SBC_ENC_INCLUDED TRUE +#endif /* UC_BT_A2DP_ENABLED */ + +#if (UC_BT_SPP_ENABLED == TRUE) +#define RFCOMM_INCLUDED TRUE +#define BTA_JV_INCLUDED TRUE +#define BTA_JV_RFCOMM_INCLUDED TRUE +#define BTC_SPP_INCLUDED TRUE +#endif /* UC_BT_SPP_ENABLED */ + +#if (UC_BT_L2CAP_ENABLED == TRUE) +#define BTA_JV_INCLUDED TRUE +#define BTC_L2CAP_INCLUDED TRUE +#define BTC_SDP_INCLUDED TRUE +#define VND_BT_JV_BTA_L2CAP TRUE +#endif /* UC_BT_L2CAP_ENABLED */ + +#if (UC_BT_HFP_AG_ENABLED == TRUE) || (UC_BT_HFP_CLIENT_ENABLED == TRUE) +#ifndef RFCOMM_INCLUDED +#define RFCOMM_INCLUDED TRUE +#endif +#ifndef BTM_SCO_INCLUDED +#define BTM_SCO_INCLUDED TRUE +#endif +#ifndef SBC_DEC_INCLUDED +#define SBC_DEC_INCLUDED TRUE +#endif +#ifndef SBC_ENC_INCLUDED +#define SBC_ENC_INCLUDED TRUE +#endif +#ifndef PLC_INCLUDED +#define PLC_INCLUDED TRUE +#endif + +#if (UC_BT_HFP_AG_ENABLED == TRUE) +#ifndef BTM_MAX_SCO_LINKS_AG +#define BTM_MAX_SCO_LINKS_AG (1) +#endif +#define BTC_HF_INCLUDED TRUE +#define BTA_AG_INCLUDED TRUE +#else +#ifndef BTM_MAX_SCO_LINKS_AG +#define BTM_MAX_SCO_LINKS_AG (0) +#endif +#endif /* (UC_BT_HFP_AG_ENABLED == TRUE) */ +#if (UC_BT_HFP_CLIENT_ENABLED == TRUE) +#ifndef BTM_MAX_SCO_LINKS_CLIENT +#define BTM_MAX_SCO_LINKS_CLIENT (1) +#endif +#define BTC_HF_CLIENT_INCLUDED TRUE +#define BTA_HF_INCLUDED TRUE +#else +#ifndef BTM_MAX_SCO_LINKS_CLIENT +#define BTM_MAX_SCO_LINKS_CLIENT (0) +#endif +#endif /* (UC_BT_HFP_CLIENT_ENABLED == TRUE) */ + +#ifndef BTM_MAX_SCO_LINKS +#define BTM_MAX_SCO_LINKS (BTM_MAX_SCO_LINKS_AG + BTM_MAX_SCO_LINKS_CLIENT) +#endif +#endif /* (UC_BT_HFP_AG_ENABLED == TRUE) || (UC_BT_HFP_CLIENT_ENABLED == TRUE) */ + +#if UC_BT_HID_ENABLED +#define BT_HID_INCLUDED TRUE +#endif /* UC_BT_HID_ENABLED */ + +#if UC_BT_HID_HOST_ENABLED +#define HID_HOST_INCLUDED TRUE +#define BTA_HH_INCLUDED TRUE +#define BTC_HH_INCLUDED TRUE +#endif /* UC_BT_HID_HOST_ENABLED */ + +#if UC_BT_HID_DEVICE_ENABLED +#define HID_DEV_INCLUDED TRUE +#define BTA_HD_INCLUDED TRUE +#define BTC_HD_INCLUDED TRUE +#endif /* UC_BT_HID_DEVICE_ENABLED */ + +#endif /* UC_BT_CLASSIC_ENABLED */ + +/* This is set to enable use of GAP L2CAP connections. */ +#if (VND_BT_JV_BTA_L2CAP == TRUE) +#define BTA_JV_L2CAP_INCLUDED TRUE +#define GAP_CONN_INCLUDED TRUE +#endif /* VND_BT_JV_BTA_L2CAP */ + +#ifndef CLASSIC_BT_INCLUDED +#define CLASSIC_BT_INCLUDED FALSE +#endif /* CLASSIC_BT_INCLUDED */ + +#ifndef CLASSIC_BT_GATT_INCLUDED +#define CLASSIC_BT_GATT_INCLUDED FALSE +#endif /* CLASSIC_BT_GATT_INCLUDED */ +/****************************************************************************** +** +** BLE features +** +******************************************************************************/ +#if (UC_BT_BLE_ENABLED ==TRUE) +#define BLE_INCLUDED TRUE +#else +#define BLE_INCLUDED FALSE +#endif /* UC_BT_BLE_ENABLED */ + +#if (UC_BT_BLE_50_FEATURES_SUPPORTED == TRUE) +#define BLE_50_FEATURE_SUPPORT TRUE +#else +#define BLE_50_FEATURE_SUPPORT FALSE +#endif + +#if (UC_BT_BLE_42_FEATURES_SUPPORTED == TRUE || BLE_50_FEATURE_SUPPORT == FALSE) +#define BLE_42_FEATURE_SUPPORT TRUE +#else +#define BLE_42_FEATURE_SUPPORT FALSE +#endif + +#if (UC_BT_BLE_FEAT_PERIODIC_ADV_SYNC_TRANSFER == TRUE) +#define BLE_FEAT_PERIODIC_ADV_SYNC_TRANSFER TRUE +#else +#define BLE_FEAT_PERIODIC_ADV_SYNC_TRANSFER FALSE +#endif + +#if (UC_BT_BLE_FEAT_PERIODIC_ADV_ENH == TRUE) +#define BLE_FEAT_PERIODIC_ADV_ENH TRUE +#else +#define BLE_FEAT_PERIODIC_ADV_ENH FALSE +#endif + +#if (UC_BT_BLE_FEAT_CREATE_SYNC_ENH == TRUE) +#define BLE_FEAT_CREATE_SYNC_ENH TRUE +#else +#define BLE_FEAT_CREATE_SYNC_ENH FALSE +#endif + +#if (UC_BT_BLE_HIGH_DUTY_ADV_INTERVAL == TRUE) +#define BLE_HIGH_DUTY_ADV_INTERVAL TRUE +#else +#define BLE_HIGH_DUTY_ADV_INTERVAL FALSE +#endif + +#if (UC_BT_BLE_RPA_SUPPORTED == TRUE) +#define CONTROLLER_RPA_LIST_ENABLE TRUE +#else +#define CONTROLLER_RPA_LIST_ENABLE FALSE +#endif + +#if (UC_BT_GATTS_ENABLE) +#define GATTS_INCLUDED TRUE +#else +#define GATTS_INCLUDED FALSE +#endif /* UC_BT_GATTS_ENABLE */ + +#if (UC_BT_GATTC_ENABLE) +#define GATTC_INCLUDED TRUE +#else +#define GATTC_INCLUDED FALSE +#endif /* UC_BT_GATTC_ENABLE */ + +#if (UC_BT_GATTC_ENABLE && UC_BT_GATTC_CACHE_NVS_FLASH_ENABLED) +#define GATTC_CACHE_NVS TRUE +#else +#define GATTC_CACHE_NVS FALSE +#endif /* UC_BT_GATTC_ENABLE && UC_BT_GATTC_CACHE_NVS_FLASH_ENABLED */ + +#if (UC_BT_GATTC_ENABLE && UC_BT_GATTC_CONNECT_RETRY_COUNT) +#define GATTC_CONNECT_RETRY_COUNT UC_BT_GATTC_CONNECT_RETRY_COUNT +#else +#define GATTC_CONNECT_RETRY_COUNT 0 +#endif /* UC_BT_GATTC_ENABLE && UC_BT_GATTC_CONNECT_RETRY_COUNT */ + +#if (GATTC_CONNECT_RETRY_COUNT > 0) +#define GATTC_CONNECT_RETRY_EN TRUE +#else +#define GATTC_CONNECT_RETRY_EN FALSE +#endif + +#ifdef UC_BT_GATTC_NOTIF_REG_MAX +#define BTA_GATTC_NOTIF_REG_MAX UC_BT_GATTC_NOTIF_REG_MAX +#else +#define BTA_GATTC_NOTIF_REG_MAX 5 +#endif + +#if (UC_BT_SMP_ENABLE) +#define SMP_INCLUDED TRUE +#if (BLE_INCLUDED == TRUE) +#define BLE_PRIVACY_SPT TRUE +#else +#define BLE_PRIVACY_SPT FALSE +#endif /*BLE_INCLUDED*/ +#else +#define SMP_INCLUDED FALSE +#define BLE_PRIVACY_SPT FALSE +#endif /* UC_BT_SMP_ENABLE */ + +#if(UC_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE) +#define SMP_SLAVE_CON_PARAMS_UPD_ENABLE TRUE +#else +#define SMP_SLAVE_CON_PARAMS_UPD_ENABLE FALSE +#endif /* UC_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE */ + +#ifdef UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP +#define BLE_ADV_REPORT_FLOW_CONTROL (UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP && BLE_INCLUDED) +#endif /* UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP */ + +#ifdef UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM +#define BLE_ADV_REPORT_FLOW_CONTROL_NUM UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM +#endif /* UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM */ + +#ifdef UC_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD +#define BLE_ADV_REPORT_DISCARD_THRSHOLD UC_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD +#endif /* UC_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD */ + +#ifdef UC_BT_ACL_CONNECTIONS +#define MAX_ACL_CONNECTIONS UC_BT_ACL_CONNECTIONS +#define GATT_MAX_PHY_CHANNEL UC_BT_ACL_CONNECTIONS +#endif /* UC_BT_ACL_CONNECTIONS */ + +#ifdef UC_BT_MULTI_CONNECTION_ENBALE +#define BT_MULTI_CONNECTION_ENBALE UC_BT_MULTI_CONNECTION_ENBALE +#endif + +#if(BT_MULTI_CONNECTION_ENBALE && (CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3)) +#define BLE_CE_LEN_MIN 5 +#else +#define BLE_CE_LEN_MIN 0 +#endif + +#ifdef UC_BT_BLE_ESTAB_LINK_CONN_TOUT +#define BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT UC_BT_BLE_ESTAB_LINK_CONN_TOUT +#endif + +//------------------Added from bdroid_buildcfg.h--------------------- +#ifndef L2CAP_EXTFEA_SUPPORTED_MASK +#define L2CAP_EXTFEA_SUPPORTED_MASK (L2CAP_EXTFEA_ENH_RETRANS | L2CAP_EXTFEA_STREAM_MODE | L2CAP_EXTFEA_NO_CRC | L2CAP_EXTFEA_FIXED_CHNLS) +#endif + +#ifndef BTUI_OPS_FORMATS +#define BTUI_OPS_FORMATS (BTA_OP_VCARD21_MASK | BTA_OP_ANY_MASK) +#endif + +#ifndef BTA_RFC_MTU_SIZE +#define BTA_RFC_MTU_SIZE (L2CAP_MTU_SIZE-L2CAP_MIN_OFFSET-RFCOMM_DATA_OVERHEAD) +#endif + +#ifndef SBC_NO_PCM_CPY_OPTION +#define SBC_NO_PCM_CPY_OPTION FALSE +#endif + +#ifndef BT_APP_DEMO +#define BT_APP_DEMO TRUE +#endif + +#ifndef BTIF_INCLUDED +#define BTIF_INCLUDED FALSE +#endif + +/****************************************************************************** +** +** BTC-layer components +** +******************************************************************************/ +#ifndef BTC_GAP_BT_INCLUDED +#define BTC_GAP_BT_INCLUDED FALSE +#endif + +#ifndef BTC_PRF_QUEUE_INCLUDED +#define BTC_PRF_QUEUE_INCLUDED FALSE +#endif + +#ifndef BTC_SM_INCLUDED +#define BTC_SM_INCLUDED FALSE +#endif + +#ifndef BTC_AV_INCLUDED +#define BTC_AV_INCLUDED FALSE +#endif + +#ifndef BTC_AV_SINK_INCLUDED +#define BTC_AV_SINK_INCLUDED FALSE +#endif + +#ifndef BTC_AV_SRC_INCLUDED +#define BTC_AV_SRC_INCLUDED FALSE +#endif + +#ifndef BTC_SPP_INCLUDED +#define BTC_SPP_INCLUDED FALSE +#endif + +#ifndef BTC_HH_INCLUDED +#define BTC_HH_INCLUDED FALSE +#endif + +#ifndef BTC_HD_INCLUDED +#define BTC_HD_INCLUDED FALSE +#endif + +#ifndef SBC_DEC_INCLUDED +#define SBC_DEC_INCLUDED FALSE +#endif + +#ifndef SBC_ENC_INCLUDED +#define SBC_ENC_INCLUDED FALSE +#endif + +/****************************************************************************** +** +** BTA-layer components +** +******************************************************************************/ +#ifndef BTA_INCLUDED +#define BTA_INCLUDED TRUE +#endif + +#ifndef BTA_DM_PM_INCLUDED +#define BTA_DM_PM_INCLUDED FALSE +#endif + +#ifndef BTA_DM_QOS_INCLUDED +#define BTA_DM_QOS_INCLUDED FALSE +#endif + +#ifndef BTA_PAN_INCLUDED +#define BTA_PAN_INCLUDED FALSE +#endif + +#ifndef BTA_HD_INCLUDED +#define BTA_HD_INCLUDED FALSE +#endif + +#ifndef BTA_HH_INCLUDED +#define BTA_HH_INCLUDED FALSE +#endif + +#ifndef BTA_HH_ROLE +#define BTA_HH_ROLE BTA_MASTER_ROLE_PREF +#endif + +#ifndef BTA_HH_LE_INCLUDED +#define BTA_HH_LE_INCLUDED FALSE +#endif + +#ifndef BTA_AR_INCLUDED +#define BTA_AR_INCLUDED FALSE +#endif + +#ifndef BTA_AV_INCLUDED +#define BTA_AV_INCLUDED FALSE +#endif + +#ifndef BTA_AV_SINK_INCLUDED +#define BTA_AV_SINK_INCLUDED FALSE +#endif + +#ifndef BTA_JV_INCLUDED +#define BTA_JV_INCLUDED FALSE +#endif + +#ifndef BTA_SDP_INCLUDED +#define BTA_SDP_INCLUDED FALSE +#endif + +/* This is set to enable use of GAP L2CAP connections. */ +#ifndef VND_BT_JV_BTA_L2CAP +#define VND_BT_JV_BTA_L2CAP FALSE +#endif + +#ifndef BTA_JV_L2CAP_INCLUDED +#define BTA_JV_L2CAP_INCLUDED FALSE +#endif + +#ifndef GAP_CONN_INCLUDED +#define GAP_CONN_INCLUDED FALSE +#endif + +/****************************************************************************** +** +** Stack-layer components +** +******************************************************************************/ +#ifndef AVCT_INCLUDED +#define AVCT_INCLUDED FALSE +#endif + +#ifndef AVDT_INCLUDED +#define AVDT_INCLUDED FALSE +#endif + +/****************************************************************************** +** +** Parameter Configurations for components +** +******************************************************************************/ +#ifndef BTA_DISABLE_DELAY +#define BTA_DISABLE_DELAY 200 /* in milliseconds */ +#endif + +#ifndef BTA_SYS_TIMER_PERIOD +#define BTA_SYS_TIMER_PERIOD 100 +#endif + +#ifndef SBC_FOR_EMBEDDED_LINUX +#define SBC_FOR_EMBEDDED_LINUX TRUE +#endif + +#ifndef AVDT_VERSION +#define AVDT_VERSION 0x0102 +#endif + +#ifndef BTA_AG_AT_MAX_LEN +#define BTA_AG_AT_MAX_LEN 512 +#endif + +#ifndef BTA_AVRCP_FF_RW_SUPPORT +#define BTA_AVRCP_FF_RW_SUPPORT FALSE +#endif + +#ifndef BTA_AG_SCO_PKT_TYPES +#define BTA_AG_SCO_PKT_TYPES (BTM_SCO_LINK_ONLY_MASK | BTM_SCO_PKT_TYPES_MASK_EV3 | BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 | BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 | BTM_SCO_PKT_TYPES_MASK_NO_3_EV5) +#endif + +#ifndef BTA_AV_RET_TOUT +#define BTA_AV_RET_TOUT 15 +#endif + +#ifndef PORCHE_PAIRING_CONFLICT +#define PORCHE_PAIRING_CONFLICT TRUE +#endif + +#ifndef BTA_AV_CO_CP_SCMS_T +#define BTA_AV_CO_CP_SCMS_T FALSE +#endif + +#if UC_BT_BLE_HOST_QUEUE_CONGESTION_CHECK +#define SCAN_QUEUE_CONGEST_CHECK TRUE +#else +#define SCAN_QUEUE_CONGEST_CHECK FALSE +#endif + +#ifdef UC_CONFIG_BT_GATTS_PPCP_CHAR_GAP +#define BTM_PERIPHERAL_ENABLED UC_CONFIG_BT_GATTS_PPCP_CHAR_GAP +#endif + +#ifdef UC_BT_GATTS_SEND_SERVICE_CHANGE_MODE +#define GATTS_SEND_SERVICE_CHANGE_MODE UC_BT_GATTS_SEND_SERVICE_CHANGE_MODE +#endif + +#if (UC_BT_GATTS_ROBUST_CACHING_ENABLED == TRUE) +#define GATTS_ROBUST_CACHING_ENABLED TRUE +#else +#define GATTS_ROBUST_CACHING_ENABLED FALSE +#endif + +#if (UC_BT_GATTS_DEVICE_NAME_WRITABLE == TRUE) +#define GATTS_DEVICE_NAME_WRITABLE TRUE +#else +#define GATTS_DEVICE_NAME_WRITABLE FALSE +#endif + +#if (UC_BT_GATTS_APPEARANCE_WRITABLE == TRUE) +#define GATTS_APPEARANCE_WRITABLE TRUE +#else +#define GATTS_APPEARANCE_WRITABLE FALSE +#endif + +#ifdef UC_BT_BLE_ACT_SCAN_REP_ADV_SCAN +#define BTM_BLE_ACTIVE_SCAN_REPORT_ADV_SCAN_RSP_INDIVIDUALLY UC_BT_BLE_ACT_SCAN_REP_ADV_SCAN +#endif + +#ifdef UC_BT_BLE_RPA_TIMEOUT +#define BTM_BLE_PRIVATE_ADDR_INT UC_BT_BLE_RPA_TIMEOUT +#endif + +#if (UC_BT_CLASSIC_BQB_ENABLED == TRUE) +#define BT_CLASSIC_BQB_INCLUDED TRUE +#else +#define BT_CLASSIC_BQB_INCLUDED FALSE +#endif + +/* This feature is used to eanble interleaved scan*/ +#ifndef BTA_HOST_INTERLEAVE_SEARCH +#define BTA_HOST_INTERLEAVE_SEARCH FALSE +#endif + +#ifndef BT_USE_TRACES +#define BT_USE_TRACES FALSE +#endif + +#ifndef BT_TRACE_BTIF +#define BT_TRACE_BTIF TRUE +#endif + +#ifndef BT_TRACE_VERBOSE +#define BT_TRACE_VERBOSE FALSE +#endif + +#ifndef BTA_DM_SDP_DB_SIZE +#define BTA_DM_SDP_DB_SIZE 8000 +#endif + +#ifndef HL_INCLUDED +#define HL_INCLUDED TRUE +#endif + +#ifndef AG_VOICE_SETTINGS +#define AG_VOICE_SETTINGS HCI_DEFAULT_VOICE_SETTINGS +#endif + +#ifndef BTIF_DM_OOB_TEST +#define BTIF_DM_OOB_TEST FALSE +#endif + +// How long to wait before activating sniff mode after entering the +// idle state for FTS, OPS connections +#ifndef BTA_FTS_OPS_IDLE_TO_SNIFF_DELAY_MS +#define BTA_FTS_OPS_IDLE_TO_SNIFF_DELAY_MS 7000 +#endif +#ifndef BTA_FTC_OPS_IDLE_TO_SNIFF_DELAY_MS +#define BTA_FTC_OPS_IDLE_TO_SNIFF_DELAY_MS 5000 +#endif + +//------------------End added from bdroid_buildcfg.h--------------------- + + +/****************************************************************************** +** +** Buffer Size +** +******************************************************************************/ + +#ifndef BT_DEFAULT_BUFFER_SIZE +#define BT_DEFAULT_BUFFER_SIZE (4096 + 16) +#endif + +#ifndef BT_SMALL_BUFFER_SIZE +#define BT_SMALL_BUFFER_SIZE 660 +#endif + +/* Receives HCI events from the lower-layer. */ +#ifndef HCI_CMD_BUF_SIZE +#define HCI_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE +#endif + +/* Sends SDP data packets. */ +#ifndef SDP_DATA_BUF_SIZE +#define SDP_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +/* Sends RFCOMM command packets. */ +#ifndef RFCOMM_CMD_BUF_SIZE +#define RFCOMM_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE +#endif + +/* Sends RFCOMM data packets. */ +#ifndef RFCOMM_DATA_BUF_SIZE +#define RFCOMM_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +/* Sends L2CAP packets to the peer and HCI messages to the controller. */ +#ifndef L2CAP_CMD_BUF_SIZE +#define L2CAP_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE +#endif + +#ifndef L2CAP_USER_TX_BUF_SIZE +#define L2CAP_USER_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +#ifndef L2CAP_USER_RX_BUF_SIZE +#define L2CAP_USER_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +/* Sends L2CAP segmented packets in ERTM mode */ +#ifndef L2CAP_FCR_TX_BUF_SIZE +#define L2CAP_FCR_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +/* Receives L2CAP segmented packets in ERTM mode */ +#ifndef L2CAP_FCR_RX_BUF_SIZE +#define L2CAP_FCR_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +#ifndef L2CAP_FCR_ERTM_BUF_SIZE +#define L2CAP_FCR_ERTM_BUF_SIZE (10240 + 24) +#endif + +/* Number of ACL buffers to assign to LE + if the HCI buffer pool is shared with BR/EDR */ +#ifndef L2C_DEF_NUM_BLE_BUF_SHARED +#define L2C_DEF_NUM_BLE_BUF_SHARED 1 +#endif + +/* Used by BTM when it sends HCI commands to the controller. */ +#ifndef BTM_CMD_BUF_SIZE +#define BTM_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE +#endif + +#ifndef OBX_LRG_DATA_BUF_SIZE +#define OBX_LRG_DATA_BUF_SIZE (8080 + 26) +#endif + +/* Used to send data to L2CAP. */ +#ifndef GAP_DATA_BUF_SIZE +#define GAP_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +/* BNEP data and protocol messages. */ +#ifndef BNEP_BUF_SIZE +#define BNEP_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +/* AVDTP buffer size for protocol messages */ +#ifndef AVDT_CMD_BUF_SIZE +#define AVDT_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE +#endif + +/* AVDTP buffer size for media packets in case of fragmentation */ +#ifndef AVDT_DATA_BUF_SIZE +#define AVDT_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +#ifndef PAN_BUF_SIZE +#define PAN_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +/* Maximum number of buffers to allocate for PAN */ +#ifndef PAN_BUF_MAX +#define PAN_BUF_MAX 100 +#endif + +/* AVCTP buffer size for protocol messages */ +#ifndef AVCT_CMD_BUF_SIZE +#define AVCT_CMD_BUF_SIZE 288 +#endif + +/* AVRCP buffer size for protocol messages */ +#ifndef AVRC_CMD_BUF_SIZE +#define AVRC_CMD_BUF_SIZE 288 +#endif + +/* AVRCP Metadata buffer size for protocol messages */ +#ifndef AVRC_META_CMD_BUF_SIZE +#define AVRC_META_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE +#endif + +#ifndef BTA_HL_LRG_DATA_BUF_SIZE +#define BTA_HL_LRG_DATA_BUF_SIZE (10240 + 24) +#endif + +/* GATT Server Database buffer size */ +#ifndef GATT_DB_BUF_SIZE +#define GATT_DB_BUF_SIZE 128 +#endif + +/* GATT Data sending buffer size */ +#ifndef GATT_DATA_BUF_SIZE +#define GATT_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +/****************************************************************************** +** +** HCI Services (H4) +** +******************************************************************************/ + +/* Use 2 second for low-resolution systems, override to 1 for high-resolution systems */ +#ifndef BT_1SEC_TIMEOUT +#define BT_1SEC_TIMEOUT (2) +#endif + +/* Quick Timer */ +/* if L2CAP_FCR_INCLUDED is TRUE then it should have 100 millisecond resolution */ +/* if none of them is included then QUICK_TIMER_TICKS_PER_SEC is set to 0 to exclude quick timer */ +#ifndef QUICK_TIMER_TICKS_PER_SEC +#define QUICK_TIMER_TICKS_PER_SEC 10 /* 100ms timer */ +#endif + +/****************************************************************************** +** +** BTM +** +******************************************************************************/ + +/* Cancel Inquiry on incoming SSP */ +#ifndef BTM_NO_SSP_ON_INQUIRY +#define BTM_NO_SSP_ON_INQUIRY FALSE +#endif + +/* Includes SCO if TRUE */ +#ifndef BTM_SCO_INCLUDED +#define BTM_SCO_INCLUDED FALSE /* TRUE includes SCO code */ +#endif + +/* Includes SCO if TRUE */ +#ifndef BTM_SCO_HCI_INCLUDED +#if UC_BT_HFP_AUDIO_DATA_PATH_HCI +#define BTM_SCO_HCI_INCLUDED TRUE /* TRUE includes SCO over HCI code */ +#else +#define BTM_SCO_HCI_INCLUDED FALSE +#endif /* UC_HFP_AUDIO_DATA_PATH_HCI */ +#endif + +/* Includes WBS if TRUE */ +#ifndef BTM_WBS_INCLUDED +#define BTM_WBS_INCLUDED UC_BT_HFP_WBS_ENABLE /* TRUE includes WBS code */ +#endif + +/* This is used to work around a controller bug that doesn't like Disconnect +** issued while there is a role switch in progress +*/ +#ifndef BTM_DISC_DURING_RS +#define BTM_DISC_DURING_RS TRUE +#endif + +/************************** +** Initial SCO TX credit +*************************/ +/* max TX SCO data packet size */ +#ifndef BTM_SCO_DATA_SIZE_MAX +#define BTM_SCO_DATA_SIZE_MAX 120 //240 +#endif + +/* max TX eSCO data packet size */ +#ifndef BTM_MSBC_FRAME_SIZE +#define BTM_MSBC_FRAME_SIZE 60 +#endif + +/* TX eSCO data packet size */ +#ifndef BTM_MSBC_FRAME_DATA_SIZE +#define BTM_MSBC_FRAME_DATA_SIZE 57 +#endif + +/* The size in bytes of the BTM inquiry database. 5 As Default */ +#ifndef BTM_INQ_DB_SIZE +#define BTM_INQ_DB_SIZE 5 +#endif + +/* The default scan mode */ +#ifndef BTM_DEFAULT_SCAN_TYPE +#define BTM_DEFAULT_SCAN_TYPE BTM_SCAN_TYPE_INTERLACED +#endif + +/* Should connections to unknown devices be allowed when not discoverable? */ +#ifndef BTM_ALLOW_CONN_IF_NONDISCOVER +#define BTM_ALLOW_CONN_IF_NONDISCOVER TRUE +#endif + +/* Sets the Page_Scan_Window: the length of time that the device is performing a page scan. */ +#ifndef BTM_DEFAULT_CONN_WINDOW +#define BTM_DEFAULT_CONN_WINDOW 0x0012 +#endif + +/* Sets the Page_Scan_Activity: the interval between the start of two consecutive page scans. */ +#ifndef BTM_DEFAULT_CONN_INTERVAL +#define BTM_DEFAULT_CONN_INTERVAL 0x0800 +#endif + +/* When automatic inquiry scan is enabled, this sets the inquiry scan window. */ +#ifndef BTM_DEFAULT_DISC_WINDOW +#define BTM_DEFAULT_DISC_WINDOW 0x0012 +#endif + +/* When automatic inquiry scan is enabled, this sets the inquiry scan interval. */ +#ifndef BTM_DEFAULT_DISC_INTERVAL +#define BTM_DEFAULT_DISC_INTERVAL 0x0800 +#endif + +/* +* {SERVICE_CLASS, MAJOR_CLASS, MINOR_CLASS} +* +* SERVICE_CLASS:0x5A (Bit17 -Networking,Bit19 - Capturing,Bit20 -Object Transfer,Bit22 -Telephony) +* MAJOR_CLASS:0x02 - PHONE +* MINOR_CLASS:0x0C - SMART_PHONE +* +*/ +#define BTA_DM_COD_SMARTPHONE {0x5A, 0x02, 0x0C} + +/* +* {SERVICE_CLASS, MAJOR_CLASS, MINOR_CLASS} +* +* SERVICE_CLASS:0x2C (Bit21 - Audio, Bit19 - Capturing) +* MAJOR_CLASS:0x04 - Audio/Video +* MINOR_CLASS:0x05 - LoudSpeaker +*/ +#define BTA_DM_COD_LOUDSPEAKER {0x2C, 0x04, 0x14} + +/* +* {SERVICE_CLASS, MAJOR_CLASS, MINOR_CLASS} +* +* SERVICE_CLASS:0x00 None +* MAJOR_CLASS:0x1f - Uncategorized: device code not specified +* MINOR_CLASS:0x00 - None +*/ +#define BTA_DM_COD_UNCLASSIFIED {0x00, 0x1f, 0x00} + +/* Default class of device */ +#ifndef BTA_DM_COD +#define BTA_DM_COD BTA_DM_COD_UNCLASSIFIED +#endif + +/* The number of SCO links. */ +#ifndef BTM_MAX_SCO_LINKS +#define BTM_MAX_SCO_LINKS 0 //3 +#endif + +/* The preferred type of SCO links (2-eSCO, 0-SCO). */ +#ifndef BTM_DEFAULT_SCO_MODE +#define BTM_DEFAULT_SCO_MODE 2 +#endif + +/* The number of security records for peer devices. 15 AS Default*/ +#ifndef BTM_SEC_MAX_DEVICE_RECORDS +#define BTM_SEC_MAX_DEVICE_RECORDS UC_BT_SMP_MAX_BONDS +#endif + +/* The number of security records for services. 32 AS Default*/ +#ifndef BTM_SEC_MAX_SERVICE_RECORDS +#define BTM_SEC_MAX_SERVICE_RECORDS 8 // 32 +#endif + +/* If True, force a retrieval of remote device name for each bond in case it's changed */ +#ifndef BTM_SEC_FORCE_RNR_FOR_DBOND +#define BTM_SEC_FORCE_RNR_FOR_DBOND FALSE +#endif + +/* Maximum device name length used in btm database. Up to 248*/ +#ifndef BTM_MAX_REM_BD_NAME_LEN +#define BTM_MAX_REM_BD_NAME_LEN 64 +#endif + +/* Maximum local device name length stored btm database. + '0' disables storage of the local name in BTM */ +#if UC_MAX_LOC_BD_NAME_LEN +#define BTM_MAX_LOC_BD_NAME_LEN UC_MAX_LOC_BD_NAME_LEN +#define BTC_MAX_LOC_BD_NAME_LEN BTM_MAX_LOC_BD_NAME_LEN +#else +#define BTM_MAX_LOC_BD_NAME_LEN 64 +#define BTC_MAX_LOC_BD_NAME_LEN BTM_MAX_LOC_BD_NAME_LEN +#endif + +/* Fixed Default String. When this is defined as null string, the device's + * product model name is used as the default local name. + */ +#ifndef BTM_DEF_LOCAL_NAME +#define BTM_DEF_LOCAL_NAME "" +#endif + +/* Maximum service name stored with security authorization (0 if not needed) */ +#ifndef BTM_SEC_SERVICE_NAME_LEN +#define BTM_SEC_SERVICE_NAME_LEN BT_MAX_SERVICE_NAME_LEN +#endif + +/* Maximum length of the service name. */ +#ifndef BT_MAX_SERVICE_NAME_LEN +#define BT_MAX_SERVICE_NAME_LEN 21 +#endif + +/* ACL buffer size in HCI Host Buffer Size command. */ +#ifndef BTM_ACL_BUF_SIZE +#define BTM_ACL_BUF_SIZE 0 +#endif + +/* The maximum number of clients that can register with the power manager. */ +#ifndef BTM_MAX_PM_RECORDS +#define BTM_MAX_PM_RECORDS 2 +#endif + +/* This is set to show debug trace messages for the power manager. */ +#ifndef BTM_PM_DEBUG +#define BTM_PM_DEBUG FALSE +#endif + +/* This is set to TRUE if link is to be unparked due to BTM_CreateSCO API. */ +#ifndef BTM_SCO_WAKE_PARKED_LINK +#define BTM_SCO_WAKE_PARKED_LINK FALSE +#endif + +/* If the user does not respond to security process requests within this many seconds, + * a negative response would be sent automatically. + * 30 is LMP response timeout value */ +#ifndef BTM_SEC_TIMEOUT_VALUE +#define BTM_SEC_TIMEOUT_VALUE 35 +#endif + +/* Maximum number of callbacks that can be registered using BTM_RegisterForVSEvents */ +#ifndef BTM_MAX_VSE_CALLBACKS +#define BTM_MAX_VSE_CALLBACKS 3 +#endif + +/****************************************** +** Lisbon Features +*******************************************/ +/* This is set to TRUE if the FEC is required for EIR packet. */ +#ifndef BTM_EIR_DEFAULT_FEC_REQUIRED +#define BTM_EIR_DEFAULT_FEC_REQUIRED TRUE +#endif + +/* The IO capability of the local device (for Simple Pairing) */ +#ifndef BTM_LOCAL_IO_CAPS +#define BTM_LOCAL_IO_CAPS BTM_IO_CAP_NONE +#endif + +#ifndef BTM_LOCAL_IO_CAPS_BLE +#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE) +#define BTM_LOCAL_IO_CAPS_BLE BTM_IO_CAP_KBDISP +#else +#define BTM_LOCAL_IO_CAPS_BLE 4 +#endif ///BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE +#endif + +/* The default MITM Protection Requirement (for Simple Pairing) + * Possible values are BTM_AUTH_SP_YES or BTM_AUTH_SP_NO */ +#ifndef BTM_DEFAULT_AUTH_REQ +#define BTM_DEFAULT_AUTH_REQ BTM_AUTH_SP_NO +#endif + +/* The default MITM Protection Requirement for dedicated bonding using Simple Pairing + * Possible values are BTM_AUTH_AP_YES or BTM_AUTH_AP_NO */ +#ifndef BTM_DEFAULT_DD_AUTH_REQ +#define BTM_DEFAULT_DD_AUTH_REQ BTM_AUTH_AP_YES +#endif + +/* Include Out-of-Band implementation for Simple Pairing */ +#ifndef BTM_OOB_INCLUDED +#define BTM_OOB_INCLUDED TRUE +#endif + +/* TRUE to include Sniff Subrating */ +#if (BTA_DM_PM_INCLUDED == TRUE) +#ifndef BTM_SSR_INCLUDED +#define BTM_SSR_INCLUDED FALSE +#endif +#endif /* BTA_DM_PM_INCLUDED */ + +/************************* +** End of Lisbon Features +**************************/ + +/* 4.1/4.2 secure connections feature */ +#ifndef SC_MODE_INCLUDED +// Disable AES-CCM (BT 4.1) for BT Classic to workaround controller AES issue. E0 encryption (BT 4.0) will be used. +#define SC_MODE_INCLUDED FALSE +#endif + +/* Used for conformance testing ONLY */ +#ifndef BTM_BLE_CONFORMANCE_TESTING +#define BTM_BLE_CONFORMANCE_TESTING FALSE +#endif + +/****************************************************************************** +** +** CONTROLLER TO HOST FLOW CONTROL +** +******************************************************************************/ + +#define C2H_FLOW_CONTROL_INCLUDED TRUE + +/****************************************************************************** +** +** L2CAP +** +******************************************************************************/ + +#ifndef L2CAP_CLIENT_INCLUDED +#define L2CAP_CLIENT_INCLUDED FALSE +#endif + +/* The maximum number of simultaneous applications that can register with LE L2CAP. */ +#ifndef BLE_MAX_L2CAP_CLIENTS +#define BLE_MAX_L2CAP_CLIENTS 15 +#endif + +/* Support status of L2CAP connection-oriented dynamic channels over LE transport with dynamic CID */ +#ifndef BLE_L2CAP_COC_INCLUDED +#define BLE_L2CAP_COC_INCLUDED FALSE // LE COC not use by default +#endif + +/* Support status of L2CAP connection-oriented dynamic channels over LE or BR/EDR transport with dynamic CID */ +#ifndef L2CAP_COC_INCLUDED +#if (CLASSIC_BT_INCLUDED == TRUE || BLE_L2CAP_COC_INCLUDED == TRUE) +#define L2CAP_COC_INCLUDED TRUE +#else +#define L2CAP_COC_INCLUDED FALSE +#endif +#endif + +/* The maximum number of simultaneous links that L2CAP can support. Up to 7*/ +#ifndef MAX_ACL_CONNECTIONS +#define MAX_L2CAP_LINKS 5 +#else +#define MAX_L2CAP_LINKS MAX_ACL_CONNECTIONS +#endif + +/* The maximum number of simultaneous channels that L2CAP can support. Up to 16*/ +#ifndef MAX_L2CAP_CHANNELS +#if (CLASSIC_BT_INCLUDED == TRUE) +#define MAX_L2CAP_CHANNELS 16 +#else +#if (SMP_INCLUDED == FALSE) +#define MAX_L2CAP_CHANNELS MAX_ACL_CONNECTIONS //This is used in the BLE client when start connected with the peer device +#else +#define MAX_L2CAP_CHANNELS (MAX_ACL_CONNECTIONS * 2) //This is used in the BLE client when start connected with the peer device and in SMP +#endif ///SMP_INCLUDED == FALSE +#endif ///CLASSIC_BT_INCLUDED == TRUE +#endif ///MAX_L2CAP_CHANNELS + +/* The maximum number of simultaneous applications that can register with L2CAP. */ +#ifndef MAX_L2CAP_CLIENTS +#if (CLASSIC_BT_INCLUDED == TRUE) +#define MAX_L2CAP_CLIENTS 8 +#else +#define MAX_L2CAP_CLIENTS 1 //Not support to allocate a channel control block in BLE only mode +#endif ///CLASSIC_BT_INCLUDED == TRUE +#endif + +/* The number of seconds of link inactivity before a link is disconnected. */ +#ifndef L2CAP_LINK_INACTIVITY_TOUT +#define L2CAP_LINK_INACTIVITY_TOUT 4 +#endif + +/* The number of seconds of link inactivity after bonding before a link is disconnected. */ +#ifndef L2CAP_BONDING_TIMEOUT +#define L2CAP_BONDING_TIMEOUT 3 +#endif + +/* The time from the HCI connection complete to disconnect if no channel is established. */ +#ifndef L2CAP_LINK_STARTUP_TOUT +#define L2CAP_LINK_STARTUP_TOUT 60 +#endif + +/* The L2CAP MTU; must be in accord with the HCI ACL pool size. */ +#ifndef L2CAP_MTU_SIZE +#define L2CAP_MTU_SIZE 1691 +#endif + +/* The L2CAP MPS over Bluetooth; must be in accord with the FCR tx pool size and ACL down buffer size. */ +#ifndef L2CAP_MPS_OVER_BR_EDR +#define L2CAP_MPS_OVER_BR_EDR 1010 +#endif + +/* If host flow control enabled, this is the number of buffers the controller can have unacknowledged. */ +#ifndef L2CAP_HOST_FC_ACL_BUFS +#define L2CAP_HOST_FC_ACL_BUFS 20 +#endif + +/* This is set to enable L2CAP to take the ACL link out of park mode when ACL data is to be sent. */ +#ifndef L2CAP_WAKE_PARKED_LINK +#define L2CAP_WAKE_PARKED_LINK TRUE +#endif + +/* Whether link wants to be the master or the slave. */ +#ifndef L2CAP_DESIRED_LINK_ROLE +#define L2CAP_DESIRED_LINK_ROLE HCI_ROLE_SLAVE +#endif + +/* Include Non-Flushable Packet Boundary Flag feature of Lisbon */ +#ifndef L2CAP_NON_FLUSHABLE_PB_INCLUDED +#define L2CAP_NON_FLUSHABLE_PB_INCLUDED TRUE +#endif + +/* Minimum number of ACL credit for high priority link */ +#ifndef L2CAP_HIGH_PRI_MIN_XMIT_QUOTA +#define L2CAP_HIGH_PRI_MIN_XMIT_QUOTA 5 +#endif + +/* used for monitoring HCI ACL credit management */ +#ifndef L2CAP_HCI_FLOW_CONTROL_DEBUG +#define L2CAP_HCI_FLOW_CONTROL_DEBUG TRUE +#endif + +/* Used for calculating transmit buffers off of */ +#ifndef L2CAP_NUM_XMIT_BUFFS +#define L2CAP_NUM_XMIT_BUFFS HCI_ACL_BUF_MAX +#endif + +/* Unicast Connectionless Data */ +#ifndef L2CAP_UCD_INCLUDED +#define L2CAP_UCD_INCLUDED FALSE +#endif + +/* Unicast Connectionless Data MTU */ +#ifndef L2CAP_UCD_MTU +#define L2CAP_UCD_MTU L2CAP_MTU_SIZE +#endif + +/* Unicast Connectionless Data Idle Timeout */ +#ifndef L2CAP_UCD_IDLE_TIMEOUT +#define L2CAP_UCD_IDLE_TIMEOUT 2 +#endif + +/* Unicast Connectionless Data Idle Timeout */ +#ifndef L2CAP_UCD_CH_PRIORITY +#define L2CAP_UCD_CH_PRIORITY L2CAP_CHNL_PRIORITY_MEDIUM +#endif + +/* Used for features using fixed channels; set to zero if no fixed channels supported (BLE, etc.) */ +/* Excluding L2CAP signaling channel and UCD */ +#ifndef L2CAP_NUM_FIXED_CHNLS +#if (CLASSIC_BT_INCLUDED == TRUE) +#define L2CAP_NUM_FIXED_CHNLS 32 +#else +#define L2CAP_NUM_FIXED_CHNLS 3 //There are just three fix channel in the BLE only mode(gatt,signal,smp) +#endif ///CLASSIC_BT_INCLUDED == TRUE +#endif + +/* First fixed channel supported */ +#ifndef L2CAP_FIRST_FIXED_CHNL +#define L2CAP_FIRST_FIXED_CHNL 4 +#endif + +#ifndef L2CAP_LAST_FIXED_CHNL +#define L2CAP_LAST_FIXED_CHNL (L2CAP_FIRST_FIXED_CHNL + L2CAP_NUM_FIXED_CHNLS - 1) +#endif + +/* Round Robin service channels in link */ +#ifndef L2CAP_ROUND_ROBIN_CHANNEL_SERVICE +#define L2CAP_ROUND_ROBIN_CHANNEL_SERVICE TRUE +#endif + +/* Used for calculating transmit buffers off of */ +#ifndef L2CAP_NUM_XMIT_BUFFS +#define L2CAP_NUM_XMIT_BUFFS HCI_ACL_BUF_MAX +#endif + +/* used for monitoring eL2CAP data flow */ +#ifndef L2CAP_ERTM_STATS +#define L2CAP_ERTM_STATS FALSE +#endif + +/* Used for conformance testing ONLY: When TRUE lets scriptwrapper overwrite info response */ +#ifndef L2CAP_CONFORMANCE_TESTING +#define L2CAP_CONFORMANCE_TESTING FALSE +#endif + +/* + * Max bytes per connection to buffer locally before dropping the + * connection if local client does not receive it - default is 1MB + */ +#ifndef L2CAP_MAX_RX_BUFFER +#define L2CAP_MAX_RX_BUFFER 0x100000 +#endif + + +#ifndef TIMER_PARAM_TYPE +#define TIMER_PARAM_TYPE UINT32 +#endif + +/****************************************************************************** +** +** BLE +** +******************************************************************************/ + +#ifndef BLE_INCLUDED +#define BLE_INCLUDED FALSE +#endif + +#ifndef BLE_ANDROID_CONTROLLER_SCAN_FILTER +#define BLE_ANDROID_CONTROLLER_SCAN_FILTER TRUE +#endif + +#ifndef LOCAL_BLE_CONTROLLER_ID +#define LOCAL_BLE_CONTROLLER_ID (1) +#endif + +/* + * Toggles support for general LE privacy features such as remote address + * resolution, local address rotation etc. + */ +#ifndef BLE_PRIVACY_SPT +#define BLE_PRIVACY_SPT FALSE +#endif + +/* + * Enables or disables support for local privacy (ex. address rotation) + */ +#ifndef BLE_LOCAL_PRIVACY_ENABLED +#define BLE_LOCAL_PRIVACY_ENABLED TRUE +#endif + +/* + * Toggles support for vendor specific extensions such as RPA offloading, + * feature discovery, multi-adv etc. + */ +#ifndef BLE_VND_INCLUDED +#define BLE_VND_INCLUDED FALSE +#endif + +#ifndef BTM_BLE_ADV_TX_POWER +#ifdef CONFIG_IDF_TARGET_ESP32 +#define BTM_BLE_ADV_TX_POWER {-12, -9, -6, -3, 0, 3, 6, 9} +#else +#define BTM_BLE_ADV_TX_POWER {-24, -21, -18, -15, -12, -9, -6, -3, 0, 3, 6, 9, 12, 15, 18, 21} +#endif +#endif + +#ifndef BTM_TX_POWER +#ifdef CONFIG_IDF_TARGET_ESP32 +#define BTM_TX_POWER {-12, -9, -6, -3, 0, 3, 6, 9} +#else +#define BTM_TX_POWER {-24, -21, -18, -15, -12, -9, -6, -3, 0, 3, 6, 9, 12, 15, 18, 21} +#endif +#endif + +#ifndef BTM_TX_POWER_LEVEL_MAX +#ifdef CONFIG_IDF_TARGET_ESP32 +#define BTM_TX_POWER_LEVEL_MAX 7 +#else +#define BTM_TX_POWER_LEVEL_MAX 15 +#endif +#endif + + +#ifndef BLE_BATCH_SCAN_INCLUDED +#define BLE_BATCH_SCAN_INCLUDED TRUE +#endif + +/****************************************************************************** +** +** ATT/GATT Protocol/Profile Settings +** +******************************************************************************/ +#ifndef GATT_INCLUDED +#if BLE_INCLUDED == TRUE +#define GATT_INCLUDED TRUE +#else +#define GATT_INCLUDED FALSE +#endif +#endif + +#ifndef BTA_GATT_INCLUDED +#if BLE_INCLUDED == TRUE +#define BTA_GATT_INCLUDED TRUE +#else +#define BTA_GATT_INCLUDED FALSE +#endif +#endif + +#if BTA_GATT_INCLUDED == TRUE && BLE_INCLUDED == FALSE +#error "can't have GATT without BLE" +#endif + +#ifndef BLE_LLT_INCLUDED +#define BLE_LLT_INCLUDED TRUE +#endif + +/* Added this marco to fixed the android 7.0 will lead to update connection parameters + collision when the slave sent the HCI_BLE_UPD_LL_CONN_PARAMS comment to the controller + request the master to update connection parameters directly. */ +#ifndef BLE_SLAVE_UPD_CONN_PARAMS +#define BLE_SLAVE_UPD_CONN_PARAMS FALSE +#endif + +#ifndef ATT_INCLUDED +#define ATT_INCLUDED TRUE +#endif + +#ifndef ATT_DEBUG +#define ATT_DEBUG FALSE +#endif + +#ifndef BLE_PERIPHERAL_MODE_SUPPORT +#define BLE_PERIPHERAL_MODE_SUPPORT TRUE +#endif + +#ifndef BLE_DELAY_REQUEST_ENC +/* This flag is to work around IPHONE problem, We need to wait for iPhone ready + before send encryption request to iPhone */ +#define BLE_DELAY_REQUEST_ENC FALSE +#endif + +#ifndef GAP_TRANSPORT_SUPPORTED +#define GAP_TRANSPORT_SUPPORTED GATT_TRANSPORT_LE_BR_EDR +#endif + +#ifndef GATTP_TRANSPORT_SUPPORTED +#define GATTP_TRANSPORT_SUPPORTED GATT_TRANSPORT_LE_BR_EDR +#endif + +#ifndef GATT_MAX_SR_PROFILES +#define GATT_MAX_SR_PROFILES UC_CONFIG_BT_GATT_MAX_SR_PROFILES +#endif + +#ifndef GATT_MAX_APPS +#define GATT_MAX_APPS 8 /* MAX is 32 note: 2 apps used internally GATT and GAP */ +#endif + +#ifndef GATT_MAX_PHY_CHANNEL +#define GATT_MAX_PHY_CHANNEL 7 +#endif + +/* Used for conformance testing ONLY */ +#ifndef GATT_CONFORMANCE_TESTING +#define GATT_CONFORMANCE_TESTING FALSE +#endif + +/* number of background connection device allowence, ideally to be the same as WL size +*/ +#ifndef GATT_MAX_BG_CONN_DEV +#define GATT_MAX_BG_CONN_DEV 8 /*MAX is 32*/ +#endif + +/****************************************************************************** +** +** GATT +** +******************************************************************************/ +#ifndef GATTC_INCLUDED +#if BLE_INCLUDED == TRUE +#define GATTC_INCLUDED FALSE +#else +#define GATTC_INCLUDED FALSE +#endif +#endif + +#ifndef GATTS_INCLUDED +#if BLE_INCLUDED == TRUE +#define GATTS_INCLUDED TRUE +#else +#define GATTS_INCLUDED FALSE +#endif +#endif + +/****************************************************************************** +** +** SMP +** +******************************************************************************/ +#ifndef SMP_INCLUDED +#if BLE_INCLUDED == TRUE +#define SMP_INCLUDED FALSE +#else +#define SMP_INCLUDED FALSE +#endif +#endif + +#ifndef SMP_DEBUG +#define SMP_DEBUG FALSE +#endif + +#ifndef SMP_DEFAULT_AUTH_REQ +#define SMP_DEFAULT_AUTH_REQ SMP_AUTH_NB_ENC_ONLY +#endif + +#ifndef SMP_MAX_ENC_KEY_SIZE +#define SMP_MAX_ENC_KEY_SIZE 16 +#endif + +#ifndef SMP_MIN_ENC_KEY_SIZE +#define SMP_MIN_ENC_KEY_SIZE 7 +#endif + +/* minimum link timeout after SMP pairing is done, leave room for key exchange + and racing condition for the following service connection. + Prefer greater than 0 second, and no less than default inactivity link idle + timer(L2CAP_LINK_INACTIVITY_TOUT) in l2cap) */ +#ifndef SMP_LINK_TOUT_MIN +#if (L2CAP_LINK_INACTIVITY_TOUT > 0) +#define SMP_LINK_TOUT_MIN L2CAP_LINK_INACTIVITY_TOUT +#else +#define SMP_LINK_TOUT_MIN 2 +#endif +#endif + +/****************************************************************************** +** +** SDP +** +******************************************************************************/ + +#ifndef SDP_INCLUDED +#define SDP_INCLUDED FALSE +#endif + +#if (SDP_INCLUDED == TRUE) && (BTA_JV_INCLUDED == TRUE) && (BT_CLASSIC_BQB_INCLUDED == TRUE) +#define BT_SDP_BQB_INCLUDED TRUE +#else +#define BT_SDP_BQB_INCLUDED FALSE +#endif + +/* This is set to enable SDP server functionality. */ +#ifndef SDP_SERVER_ENABLED +#if SDP_INCLUDED == TRUE +#define SDP_SERVER_ENABLED TRUE +#else +#define SDP_SERVER_ENABLED FALSE +#endif +#endif + +/* This is set to enable SDP client functionality. */ +#ifndef SDP_CLIENT_ENABLED +#if SDP_INCLUDED == TRUE +#define SDP_CLIENT_ENABLED TRUE +#else +#define SDP_CLIENT_ENABLED FALSE +#endif +#endif + +/* The maximum number of SDP records the server can support. */ +#ifndef SDP_MAX_RECORDS +#define SDP_MAX_RECORDS 6 /*max is 30*/ +#endif + +/* The maximum number of attributes in each record. */ +#ifndef SDP_MAX_REC_ATTR +#if (defined(HID_DEV_INCLUDED) && (HID_DEV_INCLUDED==TRUE)) || (defined(BTC_SDP_INCLUDED) && (BTC_SDP_INCLUDED==TRUE)) +#define SDP_MAX_REC_ATTR 25 +#else +#define SDP_MAX_REC_ATTR 8 +#endif /* defined(HID_DEV_INCLUDED) && (HID_DEV_INCLUDED==TRUE) */ +#endif + +#ifndef SDP_MAX_PAD_LEN +#define SDP_MAX_PAD_LEN 300 +#endif + +/* The maximum length, in bytes, of an attribute. */ +#ifndef SDP_MAX_ATTR_LEN +#define SDP_MAX_ATTR_LEN 400 +#endif + +/* The maximum number of attribute filters supported by SDP databases. */ +#ifndef SDP_MAX_ATTR_FILTERS +#define SDP_MAX_ATTR_FILTERS 15 +#endif + +/* The maximum number of UUID filters supported by SDP databases. */ +#ifndef SDP_MAX_UUID_FILTERS +#define SDP_MAX_UUID_FILTERS 3 +#endif + +/* The maximum number of record handles retrieved in a search. */ +#ifndef SDP_MAX_DISC_SERVER_RECS +#define SDP_MAX_DISC_SERVER_RECS 21 +#endif + +/* The size of a scratchpad buffer, in bytes, for storing the response to an attribute request. */ +#ifndef SDP_MAX_LIST_BYTE_COUNT +#define SDP_MAX_LIST_BYTE_COUNT 4096 +#endif + +/* The maximum number of parameters in an SDP protocol element. */ +#ifndef SDP_MAX_PROTOCOL_PARAMS +#define SDP_MAX_PROTOCOL_PARAMS 2 +#endif + +/* The maximum number of simultaneous client and server connections. */ +#ifndef SDP_MAX_CONNECTIONS +#define SDP_MAX_CONNECTIONS 4 +#endif + +/* The MTU size for the L2CAP configuration. */ +#ifndef SDP_MTU_SIZE +#define SDP_MTU_SIZE 672 +#endif + +/* The flush timeout for the L2CAP configuration. */ +#ifndef SDP_FLUSH_TO +#define SDP_FLUSH_TO 0xFFFF +#endif + +/* The name for security authorization. */ +#ifndef SDP_SERVICE_NAME +#define SDP_SERVICE_NAME "Service Discovery" +#endif + +/* The security level for BTM. */ +#ifndef SDP_SECURITY_LEVEL +#define SDP_SECURITY_LEVEL BTM_SEC_NONE +#endif + +/****************************************************************************** +** +** RFCOMM +** +******************************************************************************/ +#ifndef RFCOMM_INCLUDED +#define RFCOMM_INCLUDED FALSE +#endif + +#if (RFCOMM_INCLUDED == TRUE) && (BT_CLASSIC_BQB_INCLUDED == TRUE) +#define BT_RFCOMM_BQB_INCLUDED TRUE +#else +#define BT_RFCOMM_BQB_INCLUDED FALSE +#endif + +#ifndef BTA_JV_RFCOMM_INCLUDED +#define BTA_JV_RFCOMM_INCLUDED FALSE +#endif + +/* The maximum number of ports supported. */ +#ifndef MAX_RFC_PORTS +#define MAX_RFC_PORTS 8 /*max is 30*/ +#endif + +/* The maximum simultaneous links to different devices. */ +#ifndef MAX_ACL_CONNECTIONS +#define MAX_BD_CONNECTIONS 3 /*max is 7*/ +#else +#define MAX_BD_CONNECTIONS MAX_ACL_CONNECTIONS +#endif + +/* The port receive queue low watermark level, in bytes. */ +#ifndef PORT_RX_LOW_WM +#define PORT_RX_LOW_WM (BTA_RFC_MTU_SIZE * PORT_RX_BUF_LOW_WM) +#endif + +/* The port receive queue high watermark level, in bytes. */ +#ifndef PORT_RX_HIGH_WM +#define PORT_RX_HIGH_WM (BTA_RFC_MTU_SIZE * PORT_RX_BUF_HIGH_WM) +#endif + +/* The port receive queue critical watermark level, in bytes. */ +#ifndef PORT_RX_CRITICAL_WM +#define PORT_RX_CRITICAL_WM (BTA_RFC_MTU_SIZE * PORT_RX_BUF_CRITICAL_WM) +#endif + +/* The port receive queue low watermark level, in number of buffers. */ +#ifndef PORT_RX_BUF_LOW_WM +#define PORT_RX_BUF_LOW_WM 4 +#endif + +/* The port receive queue high watermark level, in number of buffers. */ +#ifndef PORT_RX_BUF_HIGH_WM +#define PORT_RX_BUF_HIGH_WM 10 +#endif + +/* The port receive queue critical watermark level, in number of buffers. */ +#ifndef PORT_RX_BUF_CRITICAL_WM +#define PORT_RX_BUF_CRITICAL_WM 15 +#endif + +/* The port transmit queue high watermark level, in bytes. */ +#ifndef PORT_TX_HIGH_WM +#define PORT_TX_HIGH_WM (BTA_RFC_MTU_SIZE * PORT_TX_BUF_HIGH_WM) +#endif + +/* The port transmit queue critical watermark level, in bytes. */ +#ifndef PORT_TX_CRITICAL_WM +#define PORT_TX_CRITICAL_WM (BTA_RFC_MTU_SIZE * PORT_TX_BUF_CRITICAL_WM) +#endif + +/* The port transmit queue high watermark level, in number of buffers. */ +#ifndef PORT_TX_BUF_HIGH_WM +#define PORT_TX_BUF_HIGH_WM 10 +#endif + +/* The port transmit queue high watermark level, in number of buffers. */ +#ifndef PORT_TX_BUF_CRITICAL_WM +#define PORT_TX_BUF_CRITICAL_WM 15 +#endif + +/* The RFCOMM multiplexer preferred flow control mechanism. */ +#ifndef PORT_FC_DEFAULT +#define PORT_FC_DEFAULT PORT_FC_CREDIT +#endif + +/* The maximum number of credits receiver sends to peer when using credit-based flow control. */ +#ifndef PORT_CREDIT_RX_MAX +#define PORT_CREDIT_RX_MAX 16 +#endif + +/* The credit low watermark level. */ +#ifndef PORT_CREDIT_RX_LOW +#define PORT_CREDIT_RX_LOW 8 +#endif + +/* ERTM Tx window size */ +#ifndef RFC_FCR_OPT_TX_WINDOW_SIZE +#define RFC_FCR_OPT_TX_WINDOW_SIZE 10 +#endif + +/* ERTM Maximum transmissions before disconnecting */ +#ifndef RFC_FCR_OPT_MAX_TX_B4_DISCNT +#define RFC_FCR_OPT_MAX_TX_B4_DISCNT 20 +#endif + +/* ERTM Retransmission timeout (2 secs) */ +#ifndef RFC_FCR_OPT_RETX_TOUT +#define RFC_FCR_OPT_RETX_TOUT 2000 +#endif + +/* ERTM Monitor timeout (12 secs) */ +#ifndef RFC_FCR_OPT_MONITOR_TOUT +#define RFC_FCR_OPT_MONITOR_TOUT 12000 +#endif + +/* ERTM ERTM MPS segment size */ +#ifndef RFC_FCR_OPT_MAX_PDU_SIZE +#define RFC_FCR_OPT_MAX_PDU_SIZE 1010 +#endif + +/****************************************************************************** +** +** OBEX +** +******************************************************************************/ + +/* + * Buffer size to reassemble the SDU. + * It will allow buffers to be used that are larger than the L2CAP_MAX_MTU. + */ +#ifndef OBX_USER_RX_BUF_SIZE +#define OBX_USER_RX_BUF_SIZE OBX_LRG_DATA_BUF_SIZE +#endif + +/* + * Buffer size to hold the SDU. + * It will allow buffers to be used that are larger than the L2CAP_MAX_MTU. + */ +#ifndef OBX_USER_TX_BUF_SIZE +#define OBX_USER_TX_BUF_SIZE OBX_LRG_DATA_BUF_SIZE +#endif + +/* Buffer size used to hold MPS segments during SDU reassembly. */ +#ifndef OBX_FCR_RX_BUF_SIZE +#define OBX_FCR_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +/* + * Buffer size used to hold MPS segments used in (re)transmissions. + * The size of each buffer must be able to hold the maximum MPS segment size + * passed in L2CA_SetFCROptions plus BT_HDR (8) + HCI preamble (4) + + * L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec). + */ +#ifndef OBX_FCR_TX_BUF_SIZE +#define OBX_FCR_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +/* + * Size of the transmission window when using enhanced retransmission mode. Not used + * in basic and streaming modes. Range: 1 - 63 + */ +#ifndef OBX_FCR_OPT_TX_WINDOW_SIZE_BR_EDR +#define OBX_FCR_OPT_TX_WINDOW_SIZE_BR_EDR 20 +#endif + +/* + * Number of transmission attempts for a single I-Frame before taking + * Down the connection. Used In ERTM mode only. Value is Ignored in basic and + * Streaming modes. + * Range: 0, 1-0xFF + * 0 - infinite retransmissions + * 1 - single transmission + */ +#ifndef OBX_FCR_OPT_MAX_TX_B4_DISCNT +#define OBX_FCR_OPT_MAX_TX_B4_DISCNT 20 +#endif + +/* + * Retransmission Timeout + * Range: Minimum 2000 (2 secs) on BR/EDR when supporting PBF. + */ +#ifndef OBX_FCR_OPT_RETX_TOUT +#define OBX_FCR_OPT_RETX_TOUT 2000 +#endif + +/* + * Monitor Timeout + * Range: Minimum 12000 (12 secs) on BR/EDR when supporting PBF. + */ +#ifndef OBX_FCR_OPT_MONITOR_TOUT +#define OBX_FCR_OPT_MONITOR_TOUT 12000 +#endif + +/* + * Maximum PDU payload size. + * Suggestion: The maximum amount of data that will fit into a 3-DH5 packet. + * Range: 2 octets +*/ +#ifndef OBX_FCR_OPT_MAX_PDU_SIZE +#define OBX_FCR_OPT_MAX_PDU_SIZE L2CAP_MPS_OVER_BR_EDR +#endif + +/* + * Pool ID where to reassemble the SDU. + * This Pool will allow buffers to be used that are larger than + * the L2CAP_MAX_MTU. + */ +#ifndef OBX_USER_RX_POOL_ID +#define OBX_USER_RX_POOL_ID 4 +#endif + +/* + * Pool ID where to hold the SDU. + * This Pool will allow buffers to be used that are larger than + * the L2CAP_MAX_MTU. + */ +#ifndef OBX_USER_TX_POOL_ID +#define OBX_USER_TX_POOL_ID 4 +#endif + +/* + * GKI Buffer Pool ID used to hold MPS segments during SDU reassembly + */ +#ifndef OBX_FCR_RX_POOL_ID +#define OBX_FCR_RX_POOL_ID 3 +#endif + +/* + * Pool ID used to hold MPS segments used in (re)transmissions. + * L2CAP_DEFAULT_ERM_POOL_ID is specified to use the HCI ACL data pool. + * Note: This pool needs to have enough buffers to hold two times the window size negotiated + * in the L2CA_SetFCROptions (2 * tx_win_size) to allow for retransmissions. + * The size of each buffer must be able to hold the maximum MPS segment size passed in + * L2CA_SetFCROptions plus BT_HDR (8) + HCI preamble (4) + L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec). + */ +#ifndef OBX_FCR_TX_POOL_ID +#define OBX_FCR_TX_POOL_ID 3 +#endif + + +/****************************************************************************** +** +** BNEP +** +******************************************************************************/ + +#ifndef BNEP_INCLUDED +#define BNEP_INCLUDED FALSE +#endif + +/* BNEP status API call is used mainly to get the L2CAP handle */ +#ifndef BNEP_SUPPORTS_STATUS_API +#define BNEP_SUPPORTS_STATUS_API FALSE +#endif + +/* +** When BNEP connection changes roles after the connection is established +** we will do an authentication check again on the new role +*/ +#ifndef BNEP_DO_AUTH_FOR_ROLE_SWITCH +#define BNEP_DO_AUTH_FOR_ROLE_SWITCH FALSE +#endif + + +/* Maximum number of protocol filters supported. */ +#ifndef BNEP_MAX_PROT_FILTERS +#define BNEP_MAX_PROT_FILTERS 5 +#endif + +/* Maximum number of multicast filters supported. */ +#ifndef BNEP_MAX_MULTI_FILTERS +#define BNEP_MAX_MULTI_FILTERS 5 +#endif + +/* Minimum MTU size. */ +#ifndef BNEP_MIN_MTU_SIZE +#define BNEP_MIN_MTU_SIZE L2CAP_MTU_SIZE +#endif + +/* Preferred MTU size. */ +#ifndef BNEP_MTU_SIZE +#define BNEP_MTU_SIZE BNEP_MIN_MTU_SIZE +#endif + +/* Maximum number of buffers allowed in transmit data queue. */ +#ifndef BNEP_MAX_XMITQ_DEPTH +#define BNEP_MAX_XMITQ_DEPTH 20 +#endif + +/* Maximum number BNEP of connections supported. */ +#ifndef BNEP_MAX_CONNECTIONS +#define BNEP_MAX_CONNECTIONS 7 +#endif + + +/****************************************************************************** +** +** AVDTP +** +******************************************************************************/ + +#ifndef AVDT_INCLUDED +#define AVDT_INCLUDED TRUE +#endif + +/* Include reporting capability in AVDTP */ +#ifndef AVDT_REPORTING +#define AVDT_REPORTING TRUE +#endif + +/* Include multiplexing capability in AVDTP */ +#ifndef AVDT_MULTIPLEXING +#define AVDT_MULTIPLEXING TRUE +#endif + +/* Number of simultaneous links to different peer devices. */ +#ifndef AVDT_NUM_LINKS +#define AVDT_NUM_LINKS 2 +#endif + +/* Number of simultaneous stream endpoints. */ +#ifndef AVDT_NUM_SEPS +#define AVDT_NUM_SEPS 3 +#endif + +/* Number of transport channels setup per media stream(audio or video) */ +#ifndef AVDT_NUM_CHANNELS + +#if AVDT_REPORTING == TRUE +/* signaling, media and reporting channels */ +#define AVDT_NUM_CHANNELS 3 +#else +/* signaling and media channels */ +#define AVDT_NUM_CHANNELS 2 +#endif // AVDT_REPORTING + +#endif // AVDT_NUM_CHANNELS + +/* Number of transport channels setup by AVDT for all media streams + * AVDT_NUM_CHANNELS * Number of simultaneous streams. + */ +#ifndef AVDT_NUM_TC_TBL +#define AVDT_NUM_TC_TBL 6 +#endif + +/* Maximum size in bytes of the codec capabilities information element. */ +#ifndef AVDT_CODEC_SIZE +#define AVDT_CODEC_SIZE 10 +#endif + +/* Maximum size in bytes of the content protection information element. */ +#ifndef AVDT_PROTECT_SIZE +#define AVDT_PROTECT_SIZE 90 +#endif + +/* Maximum number of GKI buffers in the fragment queue (for video frames). + * Must be less than the number of buffers in the buffer pool of size AVDT_DATA_POOL_SIZE */ +#ifndef AVDT_MAX_FRAG_COUNT +#define AVDT_MAX_FRAG_COUNT 15 +#endif + +/****************************************************************************** +** +** PAN +** +******************************************************************************/ + +#ifndef PAN_INCLUDED +#define PAN_INCLUDED FALSE +#endif + +/* This will enable the PANU role */ +#ifndef PAN_SUPPORTS_ROLE_PANU +#define PAN_SUPPORTS_ROLE_PANU FALSE +#endif + +/* This will enable the GN role */ +#ifndef PAN_SUPPORTS_ROLE_GN +#define PAN_SUPPORTS_ROLE_GN FALSE +#endif + +/* This will enable the NAP role */ +#ifndef PAN_SUPPORTS_ROLE_NAP +#define PAN_SUPPORTS_ROLE_NAP FALSE +#endif + +/* This is just for debugging purposes */ +#ifndef PAN_SUPPORTS_DEBUG_DUMP +#define PAN_SUPPORTS_DEBUG_DUMP FALSE +#endif + +/* Maximum number of PAN connections allowed */ +#ifndef MAX_PAN_CONNS +#define MAX_PAN_CONNS 7 +#endif + +/* Default service name for NAP role */ +#ifndef PAN_NAP_DEFAULT_SERVICE_NAME +#define PAN_NAP_DEFAULT_SERVICE_NAME "Network Access Point Service" +#endif + +/* Default service name for GN role */ +#ifndef PAN_GN_DEFAULT_SERVICE_NAME +#define PAN_GN_DEFAULT_SERVICE_NAME "Group Network Service" +#endif + +/* Default service name for PANU role */ +#ifndef PAN_PANU_DEFAULT_SERVICE_NAME +#define PAN_PANU_DEFAULT_SERVICE_NAME "PAN User Service" +#endif + +/* Default description for NAP role service */ +#ifndef PAN_NAP_DEFAULT_DESCRIPTION +#define PAN_NAP_DEFAULT_DESCRIPTION "NAP" +#endif + +/* Default description for GN role service */ +#ifndef PAN_GN_DEFAULT_DESCRIPTION +#define PAN_GN_DEFAULT_DESCRIPTION "GN" +#endif + +/* Default description for PANU role service */ +#ifndef PAN_PANU_DEFAULT_DESCRIPTION +#define PAN_PANU_DEFAULT_DESCRIPTION "PANU" +#endif + +/* Default Security level for PANU role. */ +#ifndef PAN_PANU_SECURITY_LEVEL +#define PAN_PANU_SECURITY_LEVEL 0 +#endif + +/* Default Security level for GN role. */ +#ifndef PAN_GN_SECURITY_LEVEL +#define PAN_GN_SECURITY_LEVEL 0 +#endif + +/* Default Security level for NAP role. */ +#ifndef PAN_NAP_SECURITY_LEVEL +#define PAN_NAP_SECURITY_LEVEL 0 +#endif + +/****************************************************************************** +** +** HFP +** +******************************************************************************/ + +#if (BTC_HF_INCLUDED == TRUE) && (BT_CLASSIC_BQB_INCLUDED == TRUE) +#define BT_HF_AG_BQB_INCLUDED TRUE +#else +#define BT_HF_AG_BQB_INCLUDED FALSE +#endif + +#if (BTC_HF_CLIENT_INCLUDED == TRUE) && (BT_CLASSIC_BQB_INCLUDED == TRUE) +#define BT_HF_CLIENT_BQB_INCLUDED TRUE +#else +#define BT_HF_CLIENT_BQB_INCLUDED FALSE +#endif + +/****************************************************************************** +** +** GAP +** +******************************************************************************/ + +#ifndef GAP_INCLUDED +#define GAP_INCLUDED TRUE +#endif + +/* This is set to enable posting event for data write */ +#ifndef GAP_CONN_POST_EVT_INCLUDED +#define GAP_CONN_POST_EVT_INCLUDED FALSE +#endif + +/* The maximum number of simultaneous GAP L2CAP connections. */ +#ifndef GAP_MAX_CONNECTIONS +#define GAP_MAX_CONNECTIONS 10 // 30 +#endif + +/* keep the raw data received from SDP server in database. */ +#ifndef SDP_RAW_DATA_INCLUDED +#define SDP_RAW_DATA_INCLUDED TRUE +#endif + +/* Inquiry duration in 1.28 second units. */ +#ifndef SDP_DEBUG +#define SDP_DEBUG TRUE +#endif + +/****************************************************************************** +** +** HID +** +******************************************************************************/ +#ifndef BT_HID_INCLUDED +#define BT_HID_INCLUDED FALSE +#endif + +/* HID Device Role Included */ +#ifndef HID_DEV_INCLUDED +#define HID_DEV_INCLUDED FALSE +#endif + +#ifndef HID_DEV_SUBCLASS +#define HID_DEV_SUBCLASS COD_MINOR_POINTING +#endif + +#ifndef HID_CONTROL_BUF_SIZE +#define HID_CONTROL_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +#ifndef HID_INTERRUPT_BUF_SIZE +#define HID_INTERRUPT_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +#ifndef HID_DEV_MTU_SIZE +#define HID_DEV_MTU_SIZE 64 +#endif + +#ifndef HID_DEV_FLUSH_TO +#define HID_DEV_FLUSH_TO 0xffff +#endif + +#if (BTA_HD_INCLUDED == TRUE) && (HID_DEV_INCLUDED == TRUE) && (BT_CLASSIC_BQB_INCLUDED == TRUE) +#define BT_HID_DEVICE_BQB_INCLUDED TRUE +#else +#define BT_HID_DEVICE_BQB_INCLUDED FALSE +#endif + +/************************************************************************* +** Definitions for Both HID-Host & Device +*/ +#ifndef HID_MAX_SVC_NAME_LEN +#define HID_MAX_SVC_NAME_LEN 32 +#endif + +#ifndef HID_MAX_SVC_DESCR_LEN +#define HID_MAX_SVC_DESCR_LEN 32 +#endif + +#ifndef HID_MAX_PROV_NAME_LEN +#define HID_MAX_PROV_NAME_LEN 32 +#endif + +/************************************************************************* +** Definitions for HID-Host +*/ +#ifndef HID_HOST_INCLUDED +#define HID_HOST_INCLUDED FALSE +#endif + +#ifndef HID_HOST_MAX_DEVICES +#define HID_HOST_MAX_DEVICES 7 +#endif + +#ifndef HID_HOST_MTU +#define HID_HOST_MTU 640 +#endif + +#ifndef HID_HOST_FLUSH_TO +#define HID_HOST_FLUSH_TO 0xffff +#endif + +#ifndef HID_HOST_MAX_CONN_RETRY +#define HID_HOST_MAX_CONN_RETRY (3) +#endif + +#ifndef HID_HOST_REPAGE_WIN +#define HID_HOST_REPAGE_WIN (2) +#endif + +/************************************************************************* + * A2DP Definitions + */ +#ifndef A2D_INCLUDED +#define A2D_INCLUDED FALSE +#endif + +#if (BTC_AV_SRC_INCLUDED == TRUE) && (BT_CLASSIC_BQB_INCLUDED == TRUE) +#define A2D_SRC_BQB_INCLUDED TRUE +#else +#define A2D_SRC_BQB_INCLUDED FALSE +#endif + +/****************************************************************************** +** +** AVCTP +** +******************************************************************************/ + +/* Number of simultaneous ACL links to different peer devices. */ +#ifndef AVCT_NUM_LINKS +#define AVCT_NUM_LINKS 2 +#endif + +/* Number of simultaneous AVCTP connections. */ +#ifndef AVCT_NUM_CONN +#define AVCT_NUM_CONN 3 +#endif + +/****************************************************************************** +** +** AVRCP +** +******************************************************************************/ +#ifndef AVRC_INCLUDED +#define AVRC_INCLUDED FALSE +#endif + +#ifndef AVRC_METADATA_INCLUDED +#if AVRC_INCLUDED == TRUE +#define AVRC_METADATA_INCLUDED TRUE +#else +#define AVRC_METADATA_INCLUDED FALSE +#endif +#endif + +#ifndef AVRC_ADV_CTRL_INCLUDED +#if AVRC_INCLUDED == TRUE +#define AVRC_ADV_CTRL_INCLUDED TRUE +#else +#define AVRC_ADV_CTRL_INCLUDED FALSE +#endif +#endif + +#ifndef AVRC_CTLR_INCLUDED +#if AVRC_INCLUDED == TRUE +#define AVRC_CTLR_INCLUDED TRUE +#else +#define AVRC_CTLR_INCLUDED FALSE +#endif +#endif + +/****************************************************************************** +** +** MCAP +** +******************************************************************************/ +#ifndef MCA_INCLUDED +#define MCA_INCLUDED FALSE +#endif + +/* The MTU size for the L2CAP configuration on control channel. 48 is the minimal */ +#ifndef MCA_CTRL_MTU +#define MCA_CTRL_MTU 60 +#endif + +/* The maximum number of registered MCAP instances. */ +#ifndef MCA_NUM_REGS +#define MCA_NUM_REGS 12 +#endif + +/* The maximum number of control channels (to difference devices) per registered MCAP instances. */ +#ifndef MCA_NUM_LINKS +#define MCA_NUM_LINKS 3 +#endif + +/* The maximum number of MDEP (including HDP echo) per registered MCAP instances. */ +#ifndef MCA_NUM_DEPS +#define MCA_NUM_DEPS 13 +#endif + +/* The maximum number of MDL link per control channel. */ +#ifndef MCA_NUM_MDLS +#define MCA_NUM_MDLS 4 +#endif + +/* Buffer size to reassemble the SDU. */ +#ifndef MCA_USER_RX_BUF_SIZE +#define MCA_USER_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +/* Buffer size to hold the SDU. */ +#ifndef MCA_USER_TX_BUF_SIZE +#define MCA_USER_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +/* + * Buffer size used to hold MPS segments during SDU reassembly + */ +#ifndef MCA_FCR_RX_BUF_SIZE +#define MCA_FCR_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +/* + * Default buffer size used to hold MPS segments used in (re)transmissions. + * The size of each buffer must be able to hold the maximum MPS segment size + * passed in tL2CAP_FCR_OPTIONS plus BT_HDR (8) + HCI preamble (4) + + * L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec). + */ +#ifndef MCA_FCR_TX_BUF_SIZE +#define MCA_FCR_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE +#endif + +/* MCAP control channel FCR Option: +Size of the transmission window when using enhanced retransmission mode. +1 is defined by HDP specification for control channel. +*/ +#ifndef MCA_FCR_OPT_TX_WINDOW_SIZE +#define MCA_FCR_OPT_TX_WINDOW_SIZE 1 +#endif + +/* MCAP control channel FCR Option: +Number of transmission attempts for a single I-Frame before taking +Down the connection. Used In ERTM mode only. Value is Ignored in basic and +Streaming modes. +Range: 0, 1-0xFF +0 - infinite retransmissions +1 - single transmission +*/ +#ifndef MCA_FCR_OPT_MAX_TX_B4_DISCNT +#define MCA_FCR_OPT_MAX_TX_B4_DISCNT 20 +#endif + +/* MCAP control channel FCR Option: Retransmission Timeout +The AVRCP specification set a value in the range of 300 - 2000 ms +Timeout (in msecs) to detect Lost I-Frames. Only used in Enhanced retransmission mode. +Range: Minimum 2000 (2 secs) when supporting PBF. + */ +#ifndef MCA_FCR_OPT_RETX_TOUT +#define MCA_FCR_OPT_RETX_TOUT 2000 +#endif + +/* MCAP control channel FCR Option: Monitor Timeout +The AVRCP specification set a value in the range of 300 - 2000 ms +Timeout (in msecs) to detect Lost S-Frames. Only used in Enhanced retransmission mode. +Range: Minimum 12000 (12 secs) when supporting PBF. +*/ +#ifndef MCA_FCR_OPT_MONITOR_TOUT +#define MCA_FCR_OPT_MONITOR_TOUT 12000 +#endif + +/* MCAP control channel FCR Option: Maximum PDU payload size. +The maximum number of payload octets that the local device can receive in a single PDU. +*/ +#ifndef MCA_FCR_OPT_MPS_SIZE +#define MCA_FCR_OPT_MPS_SIZE 1000 +#endif + +/* Shared transport */ +#ifndef NFC_SHARED_TRANSPORT_ENABLED +#define NFC_SHARED_TRANSPORT_ENABLED FALSE +#endif + +/****************************************************************************** +** +** Sleep Mode (Low Power Mode) +** +******************************************************************************/ + +#ifndef HCILP_INCLUDED +#define HCILP_INCLUDED FALSE +#endif + +/****************************************************************************** +** +** APPL - Application Task +** +******************************************************************************/ + +#define L2CAP_FEATURE_REQ_ID 73 +#define L2CAP_FEATURE_RSP_ID 173 + +/****************************************************************************** +** +** BTA +** +******************************************************************************/ +/* BTA EIR canned UUID list (default is dynamic) */ +#ifndef BTA_EIR_CANNED_UUID_LIST +#define BTA_EIR_CANNED_UUID_LIST FALSE +#endif + +/* Number of supported customer UUID in EIR */ +#ifndef BTA_EIR_SERVER_NUM_CUSTOM_UUID +#define BTA_EIR_SERVER_NUM_CUSTOM_UUID 8 +#endif + +/* CHLD override for bluedroid */ +#ifndef BTA_AG_CHLD_VAL_ECC +#define BTA_AG_CHLD_VAL_ECC "(0,1,1x,2,2x,3)" +#endif + +#ifndef BTA_AG_CHLD_VAL +#define BTA_AG_CHLD_VAL "(0,1,2,3)" +#endif + +/* Set the CIND to match HFP 1.5 */ +#ifndef BTA_AG_CIND_INFO +#define BTA_AG_CIND_INFO "(\"call\",(0,1)),(\"callsetup\",(0-3)),(\"service\",(0-1)),(\"signal\",(0-5)),(\"roam\",(0,1)),(\"battchg\",(0-5)),(\"callheld\",(0-2))" +#endif + +#ifndef BTA_DM_AVOID_A2DP_ROLESWITCH_ON_INQUIRY +#define BTA_DM_AVOID_A2DP_ROLESWITCH_ON_INQUIRY FALSE +#endif + +#ifndef BTA_GATTC_MAX_CACHE_CHAR +#define BTA_GATTC_MAX_CACHE_CHAR UC_BT_GATTC_MAX_CACHE_CHAR +#endif + +/****************************************************************************** +** +** Tracing: Include trace header file here. +** +******************************************************************************/ + +/* Enable/disable BTSnoop memory logging */ +#ifndef BTSNOOP_MEM +#define BTSNOOP_MEM FALSE +#endif + +#if UC_HEAP_ALLOCATION_FROM_SPIRAM_FIRST +#define HEAP_ALLOCATION_FROM_SPIRAM_FIRST TRUE +#else +#define HEAP_ALLOCATION_FROM_SPIRAM_FIRST FALSE +#endif + +#include "common/bt_trace.h" + +#endif /* BT_TARGET_H */ diff --git a/lib/bt/host/bluedroid/common/include/common/bt_trace.h b/lib/bt/host/bluedroid/common/include/common/bt_trace.h new file mode 100644 index 00000000..a4f1ca74 --- /dev/null +++ b/lib/bt/host/bluedroid/common/include/common/bt_trace.h @@ -0,0 +1,581 @@ +/****************************************************************************** + * + * Copyright (C) 1999-2012 Broadcom Corporation + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ + +#ifndef _BT_TRACE_H_ +#define _BT_TRACE_H_ + +#include <assert.h> +#include <stdio.h> +#include "bluedroid_user_config.h" +#include "stack/bt_types.h" +#include "bt_common.h" + +static inline void trc_dump_buffer(const char *prefix, uint8_t *data, uint16_t len) +{ + uint16_t i; + + if (!data || !len) { + return; + } + + if (prefix) { + printf("%s: len %d\r\n", prefix, len); + } + + for (i = 0; i < len; i+=16) { + printf("%02x, %02x, %02x, %02x, %02x, %02x, %02x, %02x, %02x, %02x, %02x, %02x, %02x, %02x, %02x, %02x\r\n", + *(data + i), *(data + i + 1), *(data + i + 2), *(data + i + 3), *(data + i + 4), *(data + i + 5), *(data + i + 6), *(data + i + 7), + *(data + i + 8), *(data + i + 9), *(data + i + 10), *(data + i + 11), *(data + i + 12), *(data + i + 13), *(data + i + 14), *(data + i + 15)); + } + printf("\r\n"); +} + +#ifdef BTTRC_DUMP_BUFFER +#define BTTRC_DUMP_BUFFER(_prefix, _data, _len) trc_dump_buffer(_prefix, _data, _len) +#else +#define BTTRC_DUMP_BUFFER(_prefix, _data, _len) +#endif + +//static const char BTE_LOGMSG_MODULE[] = "bte_logmsg_module"; + +/* BTrgs);E tracing IDs for debug purposes */ +/* LayerIDs for stack */ +#define BTTRC_ID_STK_GKI 1 +#define BTTRC_ID_STK_BTU 2 +#define BTTRC_ID_STK_HCI 3 +#define BTTRC_ID_STK_L2CAP 4 +#define BTTRC_ID_STK_RFCM_MX 5 +#define BTTRC_ID_STK_RFCM_PRT 6 +#define BTTRC_ID_STK_OBEX_C 7 +#define BTTRC_ID_STK_OBEX_S 8 +#define BTTRC_ID_STK_AVCT 9 +#define BTTRC_ID_STK_AVDT 10 +#define BTTRC_ID_STK_AVRC 11 +#define BTTRC_ID_STK_BIC 12 +#define BTTRC_ID_STK_BIS 13 +#define BTTRC_ID_STK_BNEP 14 +#define BTTRC_ID_STK_BPP 15 +#define BTTRC_ID_STK_BTM_ACL 16 +#define BTTRC_ID_STK_BTM_PM 17 +#define BTTRC_ID_STK_BTM_DEV_CTRL 18 +#define BTTRC_ID_STK_BTM_SVC_DSC 19 +#define BTTRC_ID_STK_BTM_INQ 20 +#define BTTRC_ID_STK_BTM_SCO 21 +#define BTTRC_ID_STK_BTM_SEC 22 +#define BTTRC_ID_STK_HID 24 +#define BTTRC_ID_STK_HSP2 25 +#define BTTRC_ID_STK_CTP 26 +#define BTTRC_ID_STK_FTC 27 +#define BTTRC_ID_STK_FTS 28 +#define BTTRC_ID_STK_GAP 29 +#define BTTRC_ID_STK_HCRP 31 +#define BTTRC_ID_STK_ICP 32 +#define BTTRC_ID_STK_OPC 33 +#define BTTRC_ID_STK_OPS 34 +#define BTTRC_ID_STK_PAN 35 +#define BTTRC_ID_STK_SAP 36 +#define BTTRC_ID_STK_SDP 37 +#define BTTRC_ID_STK_SLIP 38 +#define BTTRC_ID_STK_SPP 39 +#define BTTRC_ID_STK_TCS 40 +#define BTTRC_ID_STK_VDP 41 +#define BTTRC_ID_STK_MCAP 42 +#define BTTRC_ID_STK_GATT 43 +#define BTTRC_ID_STK_SMP 44 +#define BTTRC_ID_STK_NFC 45 +#define BTTRC_ID_STK_NCI 46 +#define BTTRC_ID_STK_IDEP 47 +#define BTTRC_ID_STK_NDEP 48 +#define BTTRC_ID_STK_LLCP 49 +#define BTTRC_ID_STK_RW 50 +#define BTTRC_ID_STK_CE 51 +#define BTTRC_ID_STK_SNEP 52 +#define BTTRC_ID_STK_NDEF 53 +#define BTTRC_ID_STK_HIDD 54 + +/* LayerIDs for BTA */ +#define BTTRC_ID_BTA_ACC 55 /* Advanced Camera Client */ +#define BTTRC_ID_BTA_AG 56 /* audio gateway */ +#define BTTRC_ID_BTA_AV 57 /* Advanced audio */ +#define BTTRC_ID_BTA_BIC 58 /* Basic Imaging Client */ +#define BTTRC_ID_BTA_BIS 59 /* Basic Imaging Server */ +#define BTTRC_ID_BTA_BP 60 /* Basic Printing Client */ +#define BTTRC_ID_BTA_CG 61 +#define BTTRC_ID_BTA_CT 62 /* cordless telephony terminal */ +#define BTTRC_ID_BTA_DG 63 /* data gateway */ +#define BTTRC_ID_BTA_DM 64 /* device manager */ +#define BTTRC_ID_BTA_DM_SRCH 65 /* device manager search */ +#define BTTRC_ID_BTA_DM_SEC 66 /* device manager security */ +#define BTTRC_ID_BTA_FM 67 +#define BTTRC_ID_BTA_FTC 68 /* file transfer client */ +#define BTTRC_ID_BTA_FTS 69 /* file transfer server */ +#define BTTRC_ID_BTA_HIDH 70 +#define BTTRC_ID_BTA_HIDD 71 +#define BTTRC_ID_BTA_JV 72 +#define BTTRC_ID_BTA_OPC 73 /* object push client */ +#define BTTRC_ID_BTA_OPS 74 /* object push server */ +#define BTTRC_ID_BTA_PAN 75 /* Personal Area Networking */ +#define BTTRC_ID_BTA_PR 76 /* Printer client */ +#define BTTRC_ID_BTA_SC 77 /* SIM Card Access server */ +#define BTTRC_ID_BTA_SS 78 /* synchronization server */ +#define BTTRC_ID_BTA_SYS 79 /* system manager */ +#define BTTRC_ID_AVDT_SCB 80 /* avdt scb */ +#define BTTRC_ID_AVDT_CCB 81 /* avdt ccb */ + +// btla-specific ++ +/* LayerIDs added for BTL-A. Probably should modify bte_logmsg.c in future. */ +#define BTTRC_ID_STK_RFCOMM 82 +#define BTTRC_ID_STK_RFCOMM_DATA 83 +#define BTTRC_ID_STK_OBEX 84 +#define BTTRC_ID_STK_A2D 85 +#define BTTRC_ID_STK_BIP 86 + +/* LayerIDs for BT APP */ +#define BTTRC_ID_BTAPP 87 +#define BTTRC_ID_BT_PROTOCOL 88 /* this is a temporary solution to allow dynamic + enable/disable of BT_PROTOCOL_TRACE */ +#define BTTRC_ID_MAX_ID BTTRC_ID_BT_PROTOCOL +// btla-specific -- +#define BTTRC_ID_ALL_LAYERS 0xFF /* all trace layers */ +/* Parameter datatypes used in Trace APIs */ +#define BTTRC_PARAM_UINT8 1 +#define BTTRC_PARAM_UINT16 2 +#define BTTRC_PARAM_UINT32 3 + +/* Enables or disables verbose trace information. */ +#ifndef BT_TRACE_VERBOSE +#define BT_TRACE_VERBOSE FALSE +#endif + +/* Enables or disables all trace messages. */ +#ifndef BT_USE_TRACES +#define BT_USE_TRACES FALSE +#endif + +#ifndef BT_TRACE_APPL +#define BT_TRACE_APPL BT_USE_TRACES +#endif + +/****************************************************************************** +** +** Trace Levels +** +** The following values may be used for different levels: +** BT_TRACE_LEVEL_NONE 0 * No trace messages to be generated +** BT_TRACE_LEVEL_ERROR 1 * Error condition trace messages +** BT_TRACE_LEVEL_WARNING 2 * Warning condition trace messages +** BT_TRACE_LEVEL_API 3 * API traces +** BT_TRACE_LEVEL_EVENT 4 * Debug messages for events +** BT_TRACE_LEVEL_DEBUG 5 * Debug messages (general) +******************************************************************************/ + +// btla-specific ++ +/* Core Stack default trace levels */ +#define HCI_INITIAL_TRACE_LEVEL UC_BT_LOG_HCI_TRACE_LEVEL +#define BTM_INITIAL_TRACE_LEVEL UC_BT_LOG_BTM_TRACE_LEVEL +#define L2CAP_INITIAL_TRACE_LEVEL UC_BT_LOG_L2CAP_TRACE_LEVEL +#define RFCOMM_INITIAL_TRACE_LEVEL UC_BT_LOG_RFCOMM_TRACE_LEVEL +#define SDP_INITIAL_TRACE_LEVEL UC_BT_LOG_SDP_TRACE_LEVEL +#define GAP_INITIAL_TRACE_LEVEL UC_BT_LOG_GAP_TRACE_LEVEL +#define BNEP_INITIAL_TRACE_LEVEL UC_BT_LOG_BNEP_TRACE_LEVEL +#define PAN_INITIAL_TRACE_LEVEL UC_BT_LOG_PAN_TRACE_LEVEL +#define A2D_INITIAL_TRACE_LEVEL UC_BT_LOG_A2D_TRACE_LEVEL +#define AVDT_INITIAL_TRACE_LEVEL UC_BT_LOG_AVDT_TRACE_LEVEL +#define AVCT_INITIAL_TRACE_LEVEL UC_BT_LOG_AVCT_TRACE_LEVEL +#define AVRC_INITIAL_TRACE_LEVEL UC_BT_LOG_AVRC_TRACE_LEVEL +#define MCA_INITIAL_TRACE_LEVEL UC_BT_LOG_MCA_TRACE_LEVEL +#define HIDH_INITIAL_TRACE_LEVEL UC_BT_LOG_HIDH_TRACE_LEVEL +#define HIDD_INITIAL_TRACE_LEVEL UC_BT_LOG_HIDD_TRACE_LEVEL +#define APPL_INITIAL_TRACE_LEVEL UC_BT_LOG_APPL_TRACE_LEVEL +#define GATT_INITIAL_TRACE_LEVEL UC_BT_LOG_GATT_TRACE_LEVEL +#define SMP_INITIAL_TRACE_LEVEL UC_BT_LOG_SMP_TRACE_LEVEL +#define BTIF_INITIAL_TRACE_LEVEL UC_BT_LOG_BTIF_TRACE_LEVEL + +// btla-specific -- + +#if !UC_BT_STACK_NO_LOG +#define LOG_ERROR(format, ... ) {if (LOG_LOCAL_LEVEL >= ESP_LOG_ERROR) esp_log_write(ESP_LOG_ERROR, "BT_LOG", LOG_FORMAT(E, format), esp_log_timestamp(), "BT_LOG", ##__VA_ARGS__); } +#define LOG_WARN(format, ... ) {if (LOG_LOCAL_LEVEL >= ESP_LOG_WARN) esp_log_write(ESP_LOG_WARN, "BT_LOG", LOG_FORMAT(W, format), esp_log_timestamp(), "BT_LOG", ##__VA_ARGS__); } +#define LOG_INFO(format, ... ) {if (LOG_LOCAL_LEVEL >= ESP_LOG_INFO) esp_log_write(ESP_LOG_INFO, "BT_LOG", LOG_FORMAT(I, format), esp_log_timestamp(), "BT_LOG", ##__VA_ARGS__); } +#define LOG_DEBUG(format, ... ) {if (LOG_LOCAL_LEVEL >= ESP_LOG_DEBUG) esp_log_write(ESP_LOG_DEBUG, "BT_LOG", LOG_FORMAT(D, format), esp_log_timestamp(), "BT_LOG", ##__VA_ARGS__); } +#define LOG_VERBOSE(format, ... ) {if (LOG_LOCAL_LEVEL >= ESP_LOG_VERBOSE) esp_log_write(ESP_LOG_VERBOSE, "BT_LOG", LOG_FORMAT(V, format), esp_log_timestamp(), "BT_LOG", ##__VA_ARGS__); } + +/* Define tracing for BTM +*/ +#define BTM_TRACE_ERROR(fmt, args...) {if (btm_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(BTM, ERROR)) BT_PRINT_E("BT_BTM", fmt, ## args);} +#define BTM_TRACE_WARNING(fmt, args...) {if (btm_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(BTM, WARNING)) BT_PRINT_W("BT_BTM", fmt, ## args);} +#define BTM_TRACE_API(fmt, args...) {if (btm_cb.trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(BTM,API)) BT_PRINT_I("BT_BTM", fmt, ## args);} +#define BTM_TRACE_EVENT(fmt, args...) {if (btm_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(BTM,EVENT)) BT_PRINT_D("BT_BTM", fmt, ## args);} +#define BTM_TRACE_DEBUG(fmt, args...) {if (btm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(BTM,DEBUG)) BT_PRINT_D("BT_BTM", fmt, ## args);} + +/* Define tracing for the L2CAP unit +*/ +#define L2CAP_TRACE_ERROR(fmt, args...) {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(L2CAP, ERROR)) BT_PRINT_E("BT_L2CAP", fmt, ## args);} +#define L2CAP_TRACE_WARNING(fmt, args...) {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(L2CAP, WARNING)) BT_PRINT_W("BT_L2CAP", fmt, ## args);} +#define L2CAP_TRACE_API(fmt, args...) {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(L2CAP,API)) BT_PRINT_I("BT_L2CAP", fmt, ## args);} +#define L2CAP_TRACE_EVENT(fmt, args...) {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(L2CAP,EVENT)) BT_PRINT_D("BT_L2CAP", fmt, ## args);} +#define L2CAP_TRACE_DEBUG(fmt, args...) {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(L2CAP,DEBUG)) BT_PRINT_D("BT_L2CAP", fmt, ## args);} + +/* Define tracing for the SDP unit +*/ +#define SDP_TRACE_ERROR(fmt, args...) {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(SDP, ERROR)) BT_PRINT_E("BT_SDP", fmt, ## args);} +#define SDP_TRACE_WARNING(fmt, args...) {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(SDP, WARNING)) BT_PRINT_W("BT_SDP", fmt, ## args);} +#define SDP_TRACE_API(fmt, args...) {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(SDP,API)) BT_PRINT_I("BT_SDP", fmt, ## args);} +#define SDP_TRACE_EVENT(fmt, args...) {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(SDP,EVENT)) BT_PRINT_D("BT_SDP", fmt, ## args);} +#define SDP_TRACE_DEBUG(fmt, args...) {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(SDP,DEBUG)) BT_PRINT_D("BT_SDP", fmt, ## args);} + +/* Define tracing for the RFCOMM unit +*/ +#define RFCOMM_TRACE_ERROR(fmt, args...) {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(RFCOMM, ERROR)) BT_PRINT_E("BT_RFCOMM", fmt, ## args);} +#define RFCOMM_TRACE_WARNING(fmt, args...) {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(RFCOMM, WARNING)) BT_PRINT_W("BT_RFCOMM", fmt, ## args);} +#define RFCOMM_TRACE_API(fmt, args...) {if (rfc_cb.trace_level >=BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(RFCOMM,API)) BT_PRINT_I("BT_RFCOMM", fmt, ## args);} +#define RFCOMM_TRACE_EVENT(fmt, args...) {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(RFCOMM,EVENT)) BT_PRINT_D("BT_RFCOMM", fmt, ## args);} +#define RFCOMM_TRACE_DEBUG(fmt, args...) {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(RFCOMM,DEBUG)) BT_PRINT_D("BT_RFCOMM", fmt, ## args);} + +/* Generic Access Profile traces */ +#define GAP_TRACE_ERROR(fmt, args...) {if (gap_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(GAP, ERROR)) BT_PRINT_E("BT_GAP", fmt, ## args);} +#define GAP_TRACE_API(fmt, args...) {if (gap_cb.trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(GAP,API)) BT_PRINT_I("BT_GAP", fmt, ## args);} +#define GAP_TRACE_EVENT(fmt, args...) {if (gap_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(GAP,EVENT)) BT_PRINT_D("BT_GAP", fmt, ## args);} +#define GAP_TRACE_WARNING(fmt, args...) {if (gap_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(GAP, WARNING)) BT_PRINT_W("BT_GAP", fmt, ## args);} + +/* define traces for HID Host */ +#define HIDH_TRACE_ERROR(fmt, args...) {if (hh_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(HIDH, ERROR)) BT_PRINT_E("BT_HIDH", fmt, ## args);} +#define HIDH_TRACE_WARNING(fmt, args...) {if (hh_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(HIDH, WARNING)) BT_PRINT_W("BT_HIDH", fmt, ## args);} +#define HIDH_TRACE_API(fmt, args...) {if (hh_cb.trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(HIDH,API)) BT_PRINT_I("BT_HIDH", fmt, ## args);} +#define HIDH_TRACE_EVENT(fmt, args...) {if (hh_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(HIDH,EVENT)) BT_PRINT_D("BT_HIDH", fmt, ## args);} +#define HIDH_TRACE_DEBUG(fmt, args...) {if (hh_cb.trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(HIDH,DEBUG)) BT_PRINT_D("BT_HIDH", fmt, ## args);} + +/* define traces for HID Device */ +#define HIDD_TRACE_ERROR(fmt, args...) {if (hd_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(HIDD, ERROR)) BT_PRINT_E("BT_HIDD", fmt, ## args);} +#define HIDD_TRACE_WARNING(fmt, args...) {if (hd_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(HIDD, WARNING)) BT_PRINT_W("BT_HIDD", fmt, ## args);} +#define HIDD_TRACE_API(fmt, args...) {if (hd_cb.trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(HIDD,API)) BT_PRINT_I("BT_HIDD", fmt, ## args);} +#define HIDD_TRACE_EVENT(fmt, args...) {if (hd_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(HIDD,EVENT)) BT_PRINT_D("BT_HIDD", fmt, ## args);} +#define HIDD_TRACE_DEBUG(fmt, args...) {if (hd_cb.trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(HIDD,DEBUG)) BT_PRINT_D("BT_HIDD", fmt, ## args);} +#define HIDD_TRACE_VERBOSE(fmt, args...) {if (hd_cb.trace_level >= BT_TRACE_LEVEL_VERBOSE && BT_LOG_LEVEL_CHECK(HIDD,VERBOSE)) BT_PRINT_D("BT_HIDD", fmt, ## args);} + +/* define traces for BNEP */ + +#define BNEP_TRACE_ERROR(fmt, args...) {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(BNEP, ERROR)) BT_PRINT_E("BT_BNEP", fmt, ## args);} +#define BNEP_TRACE_WARNING(fmt, args...) {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(BNEP, WARNING)) BT_PRINT_W("BT_BNEP", fmt, ## args);} +#define BNEP_TRACE_API(fmt, args...) {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(BNEP,API)) BT_PRINT_I("BT_BNEP", fmt, ## args);} +#define BNEP_TRACE_EVENT(fmt, args...) {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(BNEP,EVENT)) BT_PRINT_D("BT_BNEP", fmt, ## args);} +#define BNEP_TRACE_DEBUG(fmt, args...) {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(BNEP,DEBUG)) BT_PRINT_D("BT_BNEP", fmt, ## args);} + +/* define traces for PAN */ + +#define PAN_TRACE_ERROR(fmt, args...) {if (pan_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(PAN, ERROR)) BT_PRINT_E("BT_PAN", fmt, ## args);} +#define PAN_TRACE_WARNING(fmt, args...) {if (pan_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(PAN, WARNING)) BT_PRINT_W("BT_PAN", fmt, ## args);} +#define PAN_TRACE_API(fmt, args...) {if (pan_cb.trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(PAN,API)) BT_PRINT_I("BT_PAN", fmt, ## args);} +#define PAN_TRACE_EVENT(fmt, args...) {if (pan_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(PAN,EVENT)) BT_PRINT_D("BT_PAN", fmt, ## args);} +#define PAN_TRACE_DEBUG(fmt, args...) {if (pan_cb.trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(PAN,DEBUG)) BT_PRINT_D("BT_PAN", fmt, ## args);} + +/* Define tracing for the A2DP profile +*/ +#define A2D_TRACE_ERROR(fmt, args...) {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(A2D, ERROR)) BT_PRINT_E("BT_A2D", fmt, ## args);} +#define A2D_TRACE_WARNING(fmt, args...) {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(A2D, WARNING)) BT_PRINT_W("BT_A2D", fmt, ## args);} +#define A2D_TRACE_API(fmt, args...) {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(A2D,API)) BT_PRINT_I("BT_A2D", fmt, ## args);} +#define A2D_TRACE_EVENT(fmt, args...) {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(A2D,EVENT)) BT_PRINT_D("BT_A2D", fmt, ## args);} +#define A2D_TRACE_DEBUG(fmt, args...) {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(A2D,DEBUG)) BT_PRINT_D("BT_A2D", fmt, ## args);} + +/* AVDTP +*/ +#define AVDT_TRACE_ERROR(fmt, args...) {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(AVDT, ERROR)) BT_PRINT_E("BT_AVDT", fmt, ## args);} +#define AVDT_TRACE_WARNING(fmt, args...) {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(AVDT, WARNING)) BT_PRINT_W("BT_AVDT", fmt, ## args);} +#define AVDT_TRACE_API(fmt, args...) {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(AVDT,API)) BT_PRINT_I("BT_AVDT", fmt, ## args);} +#define AVDT_TRACE_EVENT(fmt, args...) {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(AVDT,EVENT)) BT_PRINT_D("BT_AVDT", fmt, ## args);} +#define AVDT_TRACE_DEBUG(fmt, args...) {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(AVDT,DEBUG)) BT_PRINT_D("BT_AVDT", fmt, ## args);} + +/* Define tracing for the AVCTP protocol +*/ +#define AVCT_TRACE_ERROR(fmt, args...) {if (avct_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(AVCT, ERROR)) BT_PRINT_E("BT_AVCT", fmt, ## args);} +#define AVCT_TRACE_WARNING(fmt, args...) {if (avct_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(AVCT, WARNING)) BT_PRINT_W("BT_AVCT", fmt, ## args);} +#define AVCT_TRACE_API(fmt, args...) {if (avct_cb.trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(AVCT,API)) BT_PRINT_I("BT_AVCT", fmt, ## args);} +#define AVCT_TRACE_EVENT(fmt, args...) {if (avct_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(AVCT,EVENT)) BT_PRINT_D("BT_AVCT", fmt, ## args);} +#define AVCT_TRACE_DEBUG(fmt, args...) {if (avct_cb.trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(AVCT,DEBUG)) BT_PRINT_D("BT_AVCT", fmt, ## args);} + +/* Define tracing for the AVRCP profile +*/ +#define AVRC_TRACE_ERROR(fmt, args...) {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(AVRC, ERROR)) BT_PRINT_E("BT_AVRC", fmt, ## args);} +#define AVRC_TRACE_WARNING(fmt, args...) {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(AVRC, WARNING)) BT_PRINT_W("BT_AVRC", fmt, ## args);} +#define AVRC_TRACE_API(fmt, args...) {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(AVRC,API)) BT_PRINT_I("BT_AVRC", fmt, ## args);} +#define AVRC_TRACE_EVENT(fmt, args...) {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(AVRC,EVENT)) BT_PRINT_D("BT_AVRC", fmt, ## args);} +#define AVRC_TRACE_DEBUG(fmt, args...) {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(AVRC,DEBUG)) BT_PRINT_D("BT_AVRC", fmt, ## args);} + +/* MCAP +*/ +#define MCA_TRACE_ERROR(fmt, args...) {if (mca_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(MCA, ERROR)) BT_PRINT_E("BT_MCA", fmt, ## args);} +#define MCA_TRACE_WARNING(fmt, args...) {if (mca_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(MCA, WARNING)) BT_PRINT_W("BT_MCA", fmt, ## args);} +#define MCA_TRACE_API(fmt, args...) {if (mca_cb.trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(MCA,API)) BT_PRINT_I("BT_MCA", fmt, ## args);} +#define MCA_TRACE_EVENT(fmt, args...) {if (mca_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(MCA,EVENT)) BT_PRINT_D("BT_MCA", fmt, ## args);} +#define MCA_TRACE_DEBUG(fmt, args...) {if (mca_cb.trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(MCA,DEBUG)) BT_PRINT_D("BT_MCA", fmt, ## args);} + +/* Define tracing for the ATT/GATT unit +*/ +#define GATT_TRACE_ERROR(fmt, args...) {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(GATT, ERROR)) BT_PRINT_E("BT_GATT", fmt, ## args);} +#define GATT_TRACE_WARNING(fmt, args...) {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(GATT, WARNING)) BT_PRINT_W("BT_GATT", fmt, ## args);} +#define GATT_TRACE_API(fmt, args...) {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(GATT,API)) BT_PRINT_I("BT_GATT", fmt, ## args);} +#define GATT_TRACE_EVENT(fmt, args...) {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(GATT,EVENT)) BT_PRINT_D("BT_GATT", fmt, ## args);} +#define GATT_TRACE_DEBUG(fmt, args...) {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(GATT,DEBUG)) BT_PRINT_D("BT_GATT", fmt, ## args);} + +/* Define tracing for the SMP unit +*/ +#define SMP_TRACE_ERROR(fmt, args...) {if (smp_cb.trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(SMP, ERROR)) BT_PRINT_E("BT_SMP", fmt, ## args);} +#define SMP_TRACE_WARNING(fmt, args...) {if (smp_cb.trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(SMP, WARNING)) BT_PRINT_W("BT_SMP", fmt, ## args);} +#define SMP_TRACE_API(fmt, args...) {if (smp_cb.trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(SMP,API)) BT_PRINT_I("BT_SMP", fmt, ## args);} +#define SMP_TRACE_EVENT(fmt, args...) {if (smp_cb.trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(SMP,EVENT)) BT_PRINT_D("BT_SMP", fmt, ## args);} +#define SMP_TRACE_DEBUG(fmt, args...) {if (smp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(SMP,DEBUG)) BT_PRINT_D("BT_SMP", fmt, ## args);} + + +extern UINT8 btif_trace_level; + +// define traces for application +#define BTIF_TRACE_ERROR(fmt, args...) {if (btif_trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(BTIF, ERROR)) BT_PRINT_E("BT_BTIF", fmt, ## args);} +#define BTIF_TRACE_WARNING(fmt, args...) {if (btif_trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(BTIF, WARNING)) BT_PRINT_W("BT_BTIF", fmt, ## args);} +#define BTIF_TRACE_API(fmt, args...) {if (btif_trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(BTIF,API)) BT_PRINT_I("BT_BTIF", fmt, ## args);} +#define BTIF_TRACE_EVENT(fmt, args...) {if (btif_trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(BTIF,EVENT)) BT_PRINT_D("BT_BTIF", fmt, ## args);} +#define BTIF_TRACE_DEBUG(fmt, args...) {if (btif_trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(BTIF,DEBUG)) BT_PRINT_D("BT_BTIF", fmt, ## args);} +#define BTIF_TRACE_VERBOSE(fmt, args...) {if (btif_trace_level >= BT_TRACE_LEVEL_VERBOSE && BT_LOG_LEVEL_CHECK(BTIF,VERBOSE)) BT_PRINT_V("BT_BTIF", fmt, ## args);} + +/* define traces for application */ + +#define APPL_TRACE_ERROR(fmt, args...) {if (appl_trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(APPL, ERROR)) BT_PRINT_E("BT_APPL", fmt, ## args);} +#define APPL_TRACE_WARNING(fmt, args...) {if (appl_trace_level >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(APPL, WARNING)) BT_PRINT_W("BT_APPL", fmt, ## args);} +#define APPL_TRACE_API(fmt, args...) {if (appl_trace_level >= BT_TRACE_LEVEL_API && BT_LOG_LEVEL_CHECK(APPL,API)) BT_PRINT_I("BT_APPL", fmt, ## args);} +#define APPL_TRACE_EVENT(fmt, args...) {if (appl_trace_level >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(APPL,EVENT)) BT_PRINT_D("BT_APPL", fmt, ## args);} +#define APPL_TRACE_DEBUG(fmt, args...) {if (appl_trace_level >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(APPL,DEBUG)) BT_PRINT_D("BT_APPL", fmt, ## args);} +#define APPL_TRACE_VERBOSE(fmt, args...) {if (appl_trace_level >= BT_TRACE_LEVEL_VERBOSE && BT_LOG_LEVEL_CHECK(APPL,VERBOSE)) BT_PRINT_V("BT_APPL", fmt, ## args);} + +/* Define tracing for the HCI unit + * Modified from `btu_cb.trace_level` to `HCI_INITIAL_TRACE_LEVEL`, + * to use HCI_TRACE_XXXX in hci_layer.c without including `btu.h` +*/ +#define HCI_TRACE_ERROR(fmt, args...) {if (HCI_INITIAL_TRACE_LEVEL >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(HCI, ERROR)) BT_PRINT_E("BT_HCI", fmt,## args);} +#define HCI_TRACE_WARNING(fmt, args...) {if (HCI_INITIAL_TRACE_LEVEL >= BT_TRACE_LEVEL_WARNING && BT_LOG_LEVEL_CHECK(HCI, WARNING)) BT_PRINT_W("BT_HCI", fmt,## args);} +#define HCI_TRACE_EVENT(fmt, args...) {if (HCI_INITIAL_TRACE_LEVEL >= BT_TRACE_LEVEL_EVENT && BT_LOG_LEVEL_CHECK(HCI,EVENT)) BT_PRINT_D("BT_HCI", fmt,## args);} +#define HCI_TRACE_DEBUG(fmt, args...) {if (HCI_INITIAL_TRACE_LEVEL >= BT_TRACE_LEVEL_DEBUG && BT_LOG_LEVEL_CHECK(HCI,DEBUG)) BT_PRINT_D("BT_HCI", fmt,## args);} + +#else +#define LOG_ERROR(fmt, args...) +#define LOG_WARN(fmt, args...) +#define LOG_INFO(fmt, args...) +#define LOG_DEBUG(fmt, args...) +#define LOG_VERBOSE(fmt, args...) + +/* Define tracing for the HCI unit +*/ +#define HCI_TRACE_ERROR(fmt, args...) +#define HCI_TRACE_WARNING(fmt, args...) +#define HCI_TRACE_EVENT(fmt, args...) +#define HCI_TRACE_DEBUG(fmt, args...) + +/* Define tracing for BTM +*/ +#define BTM_TRACE_ERROR(fmt, args...) +#define BTM_TRACE_WARNING(fmt, args...) +#define BTM_TRACE_API(fmt, args...) +#define BTM_TRACE_EVENT(fmt, args...) +#define BTM_TRACE_DEBUG(fmt, args...) + +/* Define tracing for the L2CAP unit +*/ +#define L2CAP_TRACE_ERROR(fmt, args...) +#define L2CAP_TRACE_WARNING(fmt, args...) +#define L2CAP_TRACE_API(fmt, args...) +#define L2CAP_TRACE_EVENT(fmt, args...) +#define L2CAP_TRACE_DEBUG(fmt, args...) + +/* Define tracing for the SDP unit +*/ +#define SDP_TRACE_ERROR(fmt, args...) +#define SDP_TRACE_WARNING(fmt, args...) +#define SDP_TRACE_API(fmt, args...) +#define SDP_TRACE_EVENT(fmt, args...) +#define SDP_TRACE_DEBUG(fmt, args...) + +/* Define tracing for the RFCOMM unit +*/ +#define RFCOMM_TRACE_ERROR(fmt, args...) +#define RFCOMM_TRACE_WARNING(fmt, args...) +#define RFCOMM_TRACE_API(fmt, args...) +#define RFCOMM_TRACE_EVENT(fmt, args...) +#define RFCOMM_TRACE_DEBUG(fmt, args...) + +/* Generic Access Profile traces */ +#define GAP_TRACE_ERROR(fmt, args...) +#define GAP_TRACE_EVENT(fmt, args...) +#define GAP_TRACE_API(fmt, args...) +#define GAP_TRACE_WARNING(fmt, args...) + +/* define traces for HID Host */ +#define HIDH_TRACE_ERROR(fmt, args...) +#define HIDH_TRACE_WARNING(fmt, args...) +#define HIDH_TRACE_API(fmt, args...) +#define HIDH_TRACE_EVENT(fmt, args...) +#define HIDH_TRACE_DEBUG(fmt, args...) + +/* define traces for HID Device */ +#define HIDD_TRACE_ERROR(fmt, args...) +#define HIDD_TRACE_WARNING(fmt, args...) +#define HIDD_TRACE_API(fmt, args...) +#define HIDD_TRACE_EVENT(fmt, args...) +#define HIDD_TRACE_DEBUG(fmt, args...) +#define HIDD_TRACE_VERBOSE(fmt, args...) + +/* define traces for BNEP */ + +#define BNEP_TRACE_ERROR(fmt, args...) +#define BNEP_TRACE_WARNING(fmt, args...) +#define BNEP_TRACE_API(fmt, args...) +#define BNEP_TRACE_EVENT(fmt, args...) +#define BNEP_TRACE_DEBUG(fmt, args...) + +/* define traces for PAN */ + +#define PAN_TRACE_ERROR(fmt, args...) +#define PAN_TRACE_WARNING(fmt, args...) +#define PAN_TRACE_API(fmt, args...) +#define PAN_TRACE_EVENT(fmt, args...) +#define PAN_TRACE_DEBUG(fmt, args...) + +/* Define tracing for the A2DP profile +*/ +#define A2D_TRACE_ERROR(fmt, args...) +#define A2D_TRACE_WARNING(fmt, args...) +#define A2D_TRACE_EVENT(fmt, args...) +#define A2D_TRACE_DEBUG(fmt, args...) +#define A2D_TRACE_API(fmt, args...) + +/* AVDTP +*/ +#define AVDT_TRACE_ERROR(fmt, args...) +#define AVDT_TRACE_WARNING(fmt, args...) +#define AVDT_TRACE_EVENT(fmt, args...) +#define AVDT_TRACE_DEBUG(fmt, args...) +#define AVDT_TRACE_API(fmt, args...) + +/* Define tracing for the AVCTP protocol +*/ +#define AVCT_TRACE_ERROR(fmt, args...) +#define AVCT_TRACE_WARNING(fmt, args...) +#define AVCT_TRACE_EVENT(fmt, args...) +#define AVCT_TRACE_DEBUG(fmt, args...) +#define AVCT_TRACE_API(fmt, args...) + +/* Define tracing for the AVRCP profile +*/ +#define AVRC_TRACE_ERROR(fmt, args...) +#define AVRC_TRACE_WARNING(fmt, args...) +#define AVRC_TRACE_EVENT(fmt, args...) +#define AVRC_TRACE_DEBUG(fmt, args...) +#define AVRC_TRACE_API(fmt, args...) + +/* MCAP +*/ +#define MCA_TRACE_ERROR(fmt, args...) +#define MCA_TRACE_WARNING(fmt, args...) +#define MCA_TRACE_EVENT(fmt, args...) +#define MCA_TRACE_DEBUG(fmt, args...) +#define MCA_TRACE_API(fmt, args...) + +/* Define tracing for the ATT/GATT unit +*/ +#define GATT_TRACE_ERROR(fmt, args...) +#define GATT_TRACE_WARNING(fmt, args...) +#define GATT_TRACE_API(fmt, args...) +#define GATT_TRACE_EVENT(fmt, args...) +#define GATT_TRACE_DEBUG(fmt, args...) + +/* Define tracing for the SMP unit +*/ +#define SMP_TRACE_ERROR(fmt, args...) +#define SMP_TRACE_WARNING(fmt, args...) +#define SMP_TRACE_API(fmt, args...) +#define SMP_TRACE_EVENT(fmt, args...) +#define SMP_TRACE_DEBUG(fmt, args...) + +extern UINT8 btif_trace_level; + +// define traces for application +#define BTIF_TRACE_ERROR(fmt, args...) +#define BTIF_TRACE_WARNING(fmt, args...) +#define BTIF_TRACE_API(fmt, args...) +#define BTIF_TRACE_EVENT(fmt, args...) +#define BTIF_TRACE_DEBUG(fmt, args...) +#define BTIF_TRACE_VERBOSE(fmt, args...) + +/* define traces for application */ + +#define APPL_TRACE_ERROR(fmt, args...) +#define APPL_TRACE_WARNING(fmt, args...) +#define APPL_TRACE_API(fmt, args...) +#define APPL_TRACE_EVENT(fmt, args...) +#define APPL_TRACE_DEBUG(fmt, args...) +#define APPL_TRACE_VERBOSE(fmt, args...) + +#endif ///!UC_BT_STACK_NO_LOG + + +/* Simplified Trace Helper Macro +*/ +#define bdld(fmt, args...) \ + do{\ + if((MY_LOG_LEVEL) >= BT_TRACE_LEVEL_DEBUG) \ + BT_PRINT_D(fmt, ## args); \ + }while(0) + +#define bdlw(fmt, args...) \ + do{\ + if((MY_LOG_LEVEL) >= BT_TRACE_LEVEL_WARNING) \ + BT_PRINT_W(fmt, ## args); \ + }while(0) + +#define bdle(fmt, args...) \ + do{\ + if((MY_LOG_LEVEL) >= BT_TRACE_LEVEL_ERROR) \ + BT_PRINT_E(fmt, ## args); \ + }while(0) + +#define bdla(assert_if) \ + do{\ + if(((MY_LOG_LEVEL) >= BT_TRACE_LEVEL_ERROR) && !(assert_if)) \ + BT_PRINT_E("%s: assert failed\n", #assert_if); \ + }while(0) + +typedef UINT8 tBTTRC_PARAM_TYPE; +typedef UINT8 tBTTRC_LAYER_ID; +typedef UINT8 tBTTRC_TYPE; + +typedef struct { + tBTTRC_LAYER_ID layer_id; + tBTTRC_TYPE type; /* TODO: use tBTTRC_TYPE instead of "classical level 0-5" */ +} tBTTRC_LEVEL; + +typedef UINT8 (tBTTRC_SET_TRACE_LEVEL)( UINT8 ); + +typedef struct { + const tBTTRC_LAYER_ID layer_id_start; + const tBTTRC_LAYER_ID layer_id_end; + tBTTRC_SET_TRACE_LEVEL *p_f; + const char *trc_name; + UINT8 trace_level; +} tBTTRC_FUNC_MAP; + +/* External declaration for appl_trace_level here to avoid to add the declaration in all the files using APPL_TRACExxx macros */ +extern UINT8 appl_trace_level; + +#endif /*_BT_TRACE_H_*/ diff --git a/lib/bt/host/bluedroid/common/include/common/bt_vendor_lib.h b/lib/bt/host/bluedroid/common/include/common/bt_vendor_lib.h new file mode 100644 index 00000000..63e6f9a6 --- /dev/null +++ b/lib/bt/host/bluedroid/common/include/common/bt_vendor_lib.h @@ -0,0 +1,361 @@ +/****************************************************************************** + * + * Copyright (C) 2009-2012 Broadcom Corporation + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ + +#ifndef BT_VENDOR_LIB_H +#define BT_VENDOR_LIB_H + +#include <stdint.h> +//#include <sys/cdefs.h> +//#include <sys/types.h> + +/** Struct types */ + + +/** Typedefs and defines */ + +/** Vendor specific operations OPCODE */ +typedef enum { + /* [operation] + * Power on or off the BT Controller. + * [input param] + * A pointer to int type with content of bt_vendor_power_state_t. + * Typecasting conversion: (int *) param. + * [return] + * 0 - default, don't care. + * [callback] + * None. + */ + BT_VND_OP_POWER_CTRL, + + /* [operation] + * Perform any vendor specific initialization or configuration + * on the BT Controller. This is called before stack initialization. + * [input param] + * None. + * [return] + * 0 - default, don't care. + * [callback] + * Must call fwcfg_cb to notify the stack of the completion of vendor + * specific initialization once it has been done. + */ + BT_VND_OP_FW_CFG, + + /* [operation] + * Perform any vendor specific SCO/PCM configuration on the BT Controller. + * This is called after stack initialization. + * [input param] + * None. + * [return] + * 0 - default, don't care. + * [callback] + * Must call scocfg_cb to notify the stack of the completion of vendor + * specific SCO configuration once it has been done. + */ + BT_VND_OP_SCO_CFG, + + /* [operation] + * Open UART port on where the BT Controller is attached. + * This is called before stack initialization. + * [input param] + * A pointer to int array type for open file descriptors. + * The mapping of HCI channel to fd slot in the int array is given in + * bt_vendor_hci_channels_t. + * And, it requires the vendor lib to fill up the content before returning + * the call. + * Typecasting conversion: (int (*)[]) param. + * [return] + * Numbers of opened file descriptors. + * Valid number: + * 1 - CMD/EVT/ACL-In/ACL-Out via the same fd (e.g. UART) + * 2 - CMD/EVT on one fd, and ACL-In/ACL-Out on the other fd + * 4 - CMD, EVT, ACL-In, ACL-Out are on their individual fd + * [callback] + * None. + */ + BT_VND_OP_USERIAL_OPEN, + + /* [operation] + * Close the previously opened UART port. + * [input param] + * None. + * [return] + * 0 - default, don't care. + * [callback] + * None. + */ + BT_VND_OP_USERIAL_CLOSE, + + /* [operation] + * Get the LPM idle timeout in milliseconds. + * The stack uses this information to launch a timer delay before it + * attempts to de-assert LPM WAKE signal once downstream HCI packet + * has been delivered. + * [input param] + * A pointer to uint32_t type which is passed in by the stack. And, it + * requires the vendor lib to fill up the content before returning + * the call. + * Typecasting conversion: (uint32_t *) param. + * [return] + * 0 - default, don't care. + * [callback] + * None. + */ + BT_VND_OP_GET_LPM_IDLE_TIMEOUT, + + /* [operation] + * Enable or disable LPM mode on BT Controller. + * [input param] + * A pointer to uint8_t type with content of bt_vendor_lpm_mode_t. + * Typecasting conversion: (uint8_t *) param. + * [return] + * 0 - default, don't care. + * [callback] + * Must call lpm_cb to notify the stack of the completion of LPM + * disable/enable process once it has been done. + */ + BT_VND_OP_LPM_SET_MODE, + + /* [operation] + * Assert or Deassert LPM WAKE on BT Controller. + * [input param] + * A pointer to uint8_t type with content of bt_vendor_lpm_wake_state_t. + * Typecasting conversion: (uint8_t *) param. + * [return] + * 0 - default, don't care. + * [callback] + * None. + */ + BT_VND_OP_LPM_WAKE_SET_STATE, + + /* [operation] + * Perform any vendor specific commands related to audio state changes. + * [input param] + * a pointer to bt_vendor_op_audio_state_t indicating what audio state is + * set. + * [return] + * 0 - default, don't care. + * [callback] + * None. + */ + BT_VND_OP_SET_AUDIO_STATE, + + /* [operation] + * The epilog call to the vendor module so that it can perform any + * vendor-specific processes (e.g. send a HCI_RESET to BT Controller) + * before the caller calls for cleanup(). + * [input param] + * None. + * [return] + * 0 - default, don't care. + * [callback] + * Must call epilog_cb to notify the stack of the completion of vendor + * specific epilog process once it has been done. + */ + BT_VND_OP_EPILOG, +} bt_vendor_opcode_t; + +/** Power on/off control states */ +typedef enum { + BT_VND_PWR_OFF, + BT_VND_PWR_ON, +} bt_vendor_power_state_t; + +/** Define HCI channel identifier in the file descriptors array + used in BT_VND_OP_USERIAL_OPEN operation. + */ +typedef enum { + CH_CMD, // HCI Command channel + CH_EVT, // HCI Event channel + CH_ACL_OUT, // HCI ACL downstream channel + CH_ACL_IN, // HCI ACL upstream channel + + CH_MAX // Total channels +} bt_vendor_hci_channels_t; + +/** LPM disable/enable request */ +typedef enum { + BT_VND_LPM_DISABLE, + BT_VND_LPM_ENABLE, +} bt_vendor_lpm_mode_t; + +/** LPM WAKE set state request */ +typedef enum { + BT_VND_LPM_WAKE_ASSERT, + BT_VND_LPM_WAKE_DEASSERT, +} bt_vendor_lpm_wake_state_t; + +/** Callback result values */ +typedef enum { + BT_VND_OP_RESULT_SUCCESS, + BT_VND_OP_RESULT_FAIL, +} bt_vendor_op_result_t; + +/** audio (SCO) state changes triggering VS commands for configuration */ +typedef struct { + uint16_t handle; + uint16_t peer_codec; + uint16_t state; +} bt_vendor_op_audio_state_t; + +/* + * Bluetooth Host/Controller Vendor callback structure. + */ + +/* vendor initialization/configuration callback */ +typedef void (*cfg_result_cb)(bt_vendor_op_result_t result); + +/* datapath buffer allocation callback (callout) + * + * Vendor lib needs to request a buffer through the alloc callout function + * from HCI lib if the buffer is for constructing a HCI Command packet which + * will be sent through xmit_cb to BT Controller. + * + * For each buffer allocation, the requested size needs to be big enough to + * accommodate the below header plus a complete HCI packet -- + * typedef struct + * { + * uint16_t event; + * uint16_t len; + * uint16_t offset; + * uint16_t layer_specific; + * } HC_BT_HDR; + * + * HCI lib returns a pointer to the buffer where Vendor lib should use to + * construct a HCI command packet as below format: + * + * -------------------------------------------- + * | HC_BT_HDR | HCI command | + * -------------------------------------------- + * where + * HC_BT_HDR.event = 0x2000; + * HC_BT_HDR.len = Length of HCI command; + * HC_BT_HDR.offset = 0; + * HC_BT_HDR.layer_specific = 0; + * + * For example, a HCI_RESET Command will be formed as + * ------------------------ + * | HC_BT_HDR |03|0c|00| + * ------------------------ + * with + * HC_BT_HDR.event = 0x2000; + * HC_BT_HDR.len = 3; + * HC_BT_HDR.offset = 0; + * HC_BT_HDR.layer_specific = 0; + */ +typedef void *(*malloc_cb)(int size); + +/* datapath buffer deallocation callback (callout) */ +typedef void (*mdealloc_cb)(void *p_buf); + +/* define callback of the cmd_xmit_cb + * + * The callback function which HCI lib will call with the return of command + * complete packet. Vendor lib is responsible for releasing the buffer passed + * in at the p_mem parameter by calling dealloc callout function. + */ +typedef void (*tINT_CMD_CBACK)(void *p_mem); + +/* hci command packet transmit callback (callout) + * + * Vendor lib calls xmit_cb callout function in order to send a HCI Command + * packet to BT Controller. The buffer carrying HCI Command packet content + * needs to be first allocated through the alloc callout function. + * HCI lib will release the buffer for Vendor lib once it has delivered the + * packet content to BT Controller. + * + * Vendor lib needs also provide a callback function (p_cback) which HCI lib + * will call with the return of command complete packet. + * + * The opcode parameter gives the HCI OpCode (combination of OGF and OCF) of + * HCI Command packet. For example, opcode = 0x0c03 for the HCI_RESET command + * packet. + */ +typedef uint8_t (*cmd_xmit_cb)(uint16_t opcode, void *p_buf, tINT_CMD_CBACK p_cback); + +typedef struct { + /** set to sizeof(bt_vendor_callbacks_t) */ + size_t size; + + /* + * Callback and callout functions have implemented in HCI libray + * (libbt-hci.so). + */ + + /* notifies caller result of firmware configuration request */ + cfg_result_cb fwcfg_cb; + + /* notifies caller result of sco configuration request */ + cfg_result_cb scocfg_cb; + + /* notifies caller result of lpm enable/disable */ + cfg_result_cb lpm_cb; + + /* notifies the result of codec setting */ + cfg_result_cb audio_state_cb; + + /* buffer allocation request */ + malloc_cb alloc; + + /* buffer deallocation request */ + mdealloc_cb dealloc; + + /* hci command packet transmit request */ + cmd_xmit_cb xmit_cb; + + /* notifies caller completion of epilog process */ + cfg_result_cb epilog_cb; +} bt_vendor_callbacks_t; + +/* + * Bluetooth Host/Controller VENDOR Interface + */ +typedef struct { + /** Set to sizeof(bt_vndor_interface_t) */ + size_t size; + + /* + * Functions need to be implemented in Vendor libray (libbt-vendor.so). + */ + + /** + * Caller will open the interface and pass in the callback routines + * to the implemenation of this interface. + */ + int (*init)(const bt_vendor_callbacks_t *p_cb, unsigned char *local_bdaddr); + + /** Vendor specific operations */ + int (*op)(bt_vendor_opcode_t opcode, void *param); + + /** Closes the interface */ + void (*cleanup)(void); +} bt_vendor_interface_t; + + +/* + * External shared lib functions/data + */ + +/* Entry point of DLib -- + * Vendor library needs to implement the body of bt_vendor_interface_t + * structure and uses the below name as the variable name. HCI library + * will use this symbol name to get address of the object through the + * dlsym call. + */ +//extern const bt_vendor_interface_t BLUETOOTH_VENDOR_LIB_INTERFACE; + +#endif /* BT_VENDOR_LIB_H */ diff --git a/lib/bt/host/bluedroid/common/include/common/bte.h b/lib/bt/host/bluedroid/common/include/common/bte.h new file mode 100644 index 00000000..4bef635a --- /dev/null +++ b/lib/bt/host/bluedroid/common/include/common/bte.h @@ -0,0 +1,116 @@ +/****************************************************************************** + * + * Copyright (C) 2001-2012 Broadcom Corporation + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ + +/****************************************************************************** + * + * this file contains constants and definitions for the bte project + * + ******************************************************************************/ +#ifndef BTE_H +#define BTE_H + +//#include <osi/semaphore.h> +//#include <signal.h> +//#include <pthread.h> +#include "common/bt_target.h" + +/* by default on shutdown, baudrate is reset 115kbits. this should NOT be need for platforms + * that kill BTE driver and remove/reset BT chip + */ +#ifndef BTE_RESET_BAUD_ON_BT_DISABLE +#define BTE_RESET_BAUD_ON_BT_DISABLE TRUE +#endif + +/* Target Modes (based on jumper settings on hardware [see user manual]) */ +enum { + /* BTE BBY */ + /* J3 J4 SW3-3 SW3-2 SW3-1 */ + /* -------------------------------------------- */ + BTE_MODE_SERIAL_APP, /* OUT OUT OFF OFF OFF Sample serial port application */ + BTE_MODE_APPL, /* IN OUT OFF OFF ON Target used with Tester through RPC */ + BTE_MODE_RESERVED, /* OUT IN OFF ON OFF Reserved */ + BTE_MODE_SAMPLE_APPS, /* IN IN OFF ON ON Sample applications (ICP/HSP) */ + BTE_MODE_DONGLE, /* not yet supported ON OFF OFF Dongle mode */ + BTE_MODE_APPL_PROTOCOL_TRACE, /* this is a fake mode do allow protocol tracing in application without rpc */ + BTE_MODE_INVALID +}; + +extern volatile UINT8 bte_target_mode; /* indicates the mode that the board is running in */ + +/* Startup options */ +extern UINT32 bte_startup_options; /* Switch and jumper settings at startup */ +void bte_get_startup_options(UINT32 *p_options); /* Platform specific function for getting startup options */ + +#define BTE_OPTIONS_TARGET_MODE_MASK 0x00000007 /* bits 2-0 indicate target mode (QuickConnect: jp3 & jp4, BBY: SW3-1 & SW3-2)*/ + + +/**************************************************************************** + * Definitions to define which type of application gets built + ****************************************************************************/ +#define BUILD_HCITOOL FALSE +#define BUILD_L2PING FALSE + + +#define LINUX_FM_DRIVER_INCLUDED FALSE + + +/* hcisu userial operations. should probably go into bt_types to avoid collisions! */ +#define BT_EVT_TO_HCISU_USERIAL_OP (0x0080 | BT_EVT_HCISU) +/* operation for above hcisu event */ +#define BT_HCISU_USERIAL_OPEN (0) /* open serial port calling USERIAL_Open() */ +#define BT_HCISU_USERIAL_CLOSE (1) /* close userial port */ +/* options associated with close op */ +#define BT_HCISU_USERIAL_CL_NO_DIS_BT 0 /* do not touch bt_wake and power gpio */ +#define BT_HCISU_USERIAL_CL_DIS_BT 1 /* put power and bt_wake into defined off state to preserve + power */ +/* status codes for callback */ +/* +#define BTE_HCISU_USERIAL_FAIL 0 +#define BTE_HCISU_USERIAL_OK 1 +typedef void (tUSERIAL_MSG_CBACK) (int status); +typedef struct tHCISU_USERIAL_MSG_tag { + BT_HDR hdr; + tUSERIAL_MSG_CBACK *p_cback; + UINT8 port; // port number + UINT8 op; + UINT8 option; // option for operation. depends on operation +} tHCISU_USERIAL_MSG; + +extern void bte_hcisu_userial_oper( tUSERIAL_MSG_CBACK *p_cback, UINT8 port, UINT8 op, UINT8 option ); +*/ + +/* Pointer to function for sending HCI commands and data to the HCI tranport */ +extern int (*p_bte_hci_send)(UINT16 port, BT_HDR *p_msg); + + +/* Protocol trace mask */ +extern UINT32 bte_proto_trace_mask; + +typedef struct tBAUD_REG_tag { + UINT8 DHBR; + UINT8 DLBR; + UINT8 ExplicitBaudRate0; + UINT8 ExplicitBaudRate1; + UINT8 ExplicitBaudRate2; + UINT8 ExplicitBaudRate3; +} tBAUD_REG; + + +extern const tBAUD_REG baud_rate_regs[]; + +#endif /* BTE_H */ diff --git a/lib/bt/host/bluedroid/common/include/common/bte_appl.h b/lib/bt/host/bluedroid/common/include/common/bte_appl.h new file mode 100644 index 00000000..f14b4d91 --- /dev/null +++ b/lib/bt/host/bluedroid/common/include/common/bte_appl.h @@ -0,0 +1,41 @@ +/****************************************************************************** + * + * Copyright (C) 2002-2012 Broadcom Corporation + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ + +/****************************************************************************** + * + * This is the interface file for the bte application task + * + ******************************************************************************/ + +#pragma once + +typedef struct { +#if ((BLE_INCLUDED == TRUE) && (SMP_INCLUDED == TRUE)) + UINT8 ble_auth_req; + UINT8 ble_io_cap; + UINT8 ble_init_key; + UINT8 ble_resp_key; + UINT8 ble_max_key_size; + UINT8 ble_min_key_size; + UINT8 ble_accept_auth_enable; + UINT8 oob_support; +#endif + +} tBTE_APPL_CFG; + +extern tBTE_APPL_CFG bte_appl_cfg; |