Update forked idf components

2 files changed, 405 insertions, 16 deletions

diff --git a/lib/bt/include/esp32c5/include/esp_bt.h b/lib/bt/include/esp32c5/include/esp_bt.h
index 1a7cd646..91b1da30 100644
--- a/lib/bt/include/esp32c5/include/esp_bt.h
+++ b/lib/bt/include/esp32c5/include/esp_bt.h
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -16,6 +16,7 @@
 #include "nimble/nimble_npl.h"
 #include "../../../../controller/esp32c5/esp_bt_cfg.h"
 #include "hal/efuse_hal.h"
+#include "esp_private/esp_modem_clock.h"
 
 #ifdef CONFIG_BT_LE_HCI_INTERFACE_USE_UART
 #include "driver/uart.h"
@@ -75,6 +76,9 @@ typedef enum {
  * @brief Bluetooth TX power level(index), it's just a index corresponding to power(dbm).
  */
 typedef enum {
+    ESP_PWR_LVL_N24 = 0,              /*!< Corresponding to -24dbm */
+    ESP_PWR_LVL_N21 = 1,              /*!< Corresponding to -21dbm */
+    ESP_PWR_LVL_N18 = 2,              /*!< Corresponding to -18dbm */
     ESP_PWR_LVL_N15 = 3,              /*!< Corresponding to -15dbm */
     ESP_PWR_LVL_N12 = 4,              /*!< Corresponding to -12dbm */
     ESP_PWR_LVL_N9  = 5,              /*!< Corresponding to  -9dbm */
@@ -155,7 +159,7 @@ esp_err_t esp_ble_tx_power_set_enhanced(esp_ble_enhanced_power_type_t power_type
  */
 esp_power_level_t esp_ble_tx_power_get_enhanced(esp_ble_enhanced_power_type_t power_type, uint16_t handle);
 
-#define CONFIG_VERSION  0x20231124
+#define CONFIG_VERSION  0x20250526
 #define CONFIG_MAGIC    0x5A5AA5A5
 
 /**
@@ -196,13 +200,6 @@ typedef struct {
     uint8_t controller_run_cpu;                      /*!< CPU core on which the controller runs */
     uint8_t enable_qa_test;                          /*!< Enable quality assurance (QA) testing */
     uint8_t enable_bqb_test;                         /*!< Enable Bluetooth Qualification Test (BQB) testing */
-    uint8_t enable_uart_hci;                         /*!< Enable UART HCI (Host Controller Interface) */
-    uint8_t ble_hci_uart_port;                       /*!< UART port number for Bluetooth HCI */
-    uint32_t ble_hci_uart_baud;                      /*!< Baud rate for Bluetooth HCI UART */
-    uint8_t ble_hci_uart_data_bits;                  /*!< Number of data bits for Bluetooth HCI UART */
-    uint8_t ble_hci_uart_stop_bits;                  /*!< Number of stop bits for Bluetooth HCI UART */
-    uint8_t ble_hci_uart_flow_ctrl;                  /*!< Flow control settings for Bluetooth HCI UART */
-    uint8_t ble_hci_uart_uart_parity;                /*!< Parity settings for Bluetooth HCI UART */
     uint8_t enable_tx_cca;                           /*!< Enable Transmit Clear Channel Assessment (TX CCA) */
     uint8_t cca_rssi_thresh;                         /*!< RSSI threshold for Transmit Clear Channel Assessment (CCA) */
     uint8_t sleep_en;                                /*!< Enable sleep mode */
@@ -216,6 +213,25 @@ typedef struct {
     uint8_t ignore_wl_for_direct_adv;                /*!< Ignore the whitelist for direct advertising */
     uint8_t enable_pcl;                              /*!< Enable power control */
     uint8_t csa2_select;                             /*!< Select CSA#2*/
+    uint8_t enable_csr;                              /*!< Enable CSR */
+    uint8_t ble_aa_check;                            /*!< True if adds a verification step for the Access Address within the CONNECT_IND PDU; false otherwise. Configurable in menuconfig */
+    uint8_t ble_llcp_disc_flag;                      /*!< Flag indicating whether the Controller disconnects after Instant Passed (0x28) error occurs. Configurable in menuconfig.
+                                                        - The Controller does not disconnect after Instant Passed (0x28) by default. */
+    uint16_t scan_backoff_upperlimitmax;             /*!< The value of upperlimitmax is 2^n, The maximum value is 256 */
+    uint8_t ble_chan_ass_en;                         /*!< Enable / disable BLE channel assessment. Configurable in menuconfig.
+                                                        - 0 - Disable
+                                                        - 1 - Enable (default) */
+    uint8_t ble_data_lenth_zero_aux;                 /*!< Enable / disable auxiliary packets when the extended ADV data length is zero. Configurable in menuconfig.
+                                                        - 0 - Disable (default)
+                                                        - 1 - Enable */
+    uint8_t vhci_enabled;                            /*!< VHCI mode is enabled */
+    uint8_t ptr_check_enabled;                       /*!< Enable boundary check for internal memory. */
+    uint8_t ble_adv_tx_options;                     /*!< The options for Extended advertising sending. */
+    uint8_t skip_unnecessary_checks_en;             /*!< The option to skip non-fatal state checks and perform extra handling for fatal checks. */
+    uint8_t fast_conn_data_tx_en;                   /*!< The option for fast transmission of connection data
+                                                        - 0 - Disable
+                                                        - 1 - Enable (default) */
+    int8_t ch39_txpwr;                              /*!< BLE transmit power (in dBm) used for BLE advertising on channel 39. */
     uint32_t config_magic;                           /*!< Magic number for configuration validation */
 } esp_bt_controller_config_t;
 
@@ -252,13 +268,6 @@ typedef struct {
     .controller_run_cpu         = 0,                                                    \
     .enable_qa_test             = RUN_QA_TEST,                                          \
     .enable_bqb_test            = RUN_BQB_TEST,                                         \
-    .enable_uart_hci            = HCI_UART_EN,                                          \
-    .ble_hci_uart_port          = DEFAULT_BT_LE_HCI_UART_PORT,                          \
-    .ble_hci_uart_baud          = DEFAULT_BT_LE_HCI_UART_BAUD,                          \
-    .ble_hci_uart_data_bits     = DEFAULT_BT_LE_HCI_UART_DATA_BITS,                     \
-    .ble_hci_uart_stop_bits     = DEFAULT_BT_LE_HCI_UART_STOP_BITS,                     \
-    .ble_hci_uart_flow_ctrl     = DEFAULT_BT_LE_HCI_UART_FLOW_CTRL,                     \
-    .ble_hci_uart_uart_parity   = DEFAULT_BT_LE_HCI_UART_PARITY,                        \
     .enable_tx_cca              = DEFAULT_BT_LE_TX_CCA_ENABLED,                         \
     .cca_rssi_thresh            = 256 - DEFAULT_BT_LE_CCA_RSSI_THRESH,                  \
     .sleep_en                   = NIMBLE_SLEEP_ENABLE,                                  \
@@ -270,6 +279,18 @@ typedef struct {
     .ignore_wl_for_direct_adv   = 0,                                                    \
     .enable_pcl                 = DEFAULT_BT_LE_POWER_CONTROL_ENABLED,                  \
     .csa2_select                = DEFAULT_BT_LE_50_FEATURE_SUPPORT,                     \
+    .enable_csr                 = 0,                                                    \
+    .ble_aa_check               = DEFAULT_BT_LE_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS,  \
+    .ble_llcp_disc_flag         = BT_LE_CTRL_LLCP_DISC_FLAG,                            \
+    .scan_backoff_upperlimitmax = BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX,                   \
+    .ble_chan_ass_en            = DEFAULT_BT_LE_CTRL_CHAN_ASS_EN,                       \
+    .ble_data_lenth_zero_aux    = DEFAULT_BT_LE_CTRL_ADV_DATA_LENGTH_ZERO_AUX,          \
+    .vhci_enabled               = DEFAULT_BT_LE_VHCI_ENABLED,                           \
+    .ptr_check_enabled          = DEFAULT_BT_LE_PTR_CHECK_ENABLED,                      \
+    .ble_adv_tx_options         = 0,                                                    \
+    .skip_unnecessary_checks_en = 0,                                                    \
+    .fast_conn_data_tx_en       = DEFAULT_BT_LE_CTRL_FAST_CONN_DATA_TX_EN,              \
+    .ch39_txpwr                 = BLE_LL_TX_PWR_DBM_N,                                  \
     .config_magic = CONFIG_MAGIC,                                                       \
 }
 
@@ -426,6 +447,14 @@ extern int esp_ble_hw_get_static_addr(esp_ble_addr_t *addr);
 void esp_ble_controller_log_dump_all(bool output);
 #endif // CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
 
+modem_clock_lpclk_src_t esp_bt_get_lpclk_src(void);
+
+void esp_bt_set_lpclk_src(modem_clock_lpclk_src_t clk_src);
+
+uint32_t esp_bt_get_lpclk_freq(void);
+
+void esp_bt_set_lpclk_freq(uint32_t clk_freq);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/bt/include/esp32c5/include/esp_bt_vs.h b/lib/bt/include/esp32c5/include/esp_bt_vs.h
new file mode 100644
index 00000000..3cbed925
--- /dev/null
+++ b/lib/bt/include/esp32c5/include/esp_bt_vs.h
@@ -0,0 +1,360 @@
+/*
+ * SPDX-FileCopyrightText: 2025 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#pragma once
+
+#include "sdkconfig.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+// @brief HCI VS Commands for Espressif's Bluetooth Host
+//
+// @note The following vendor-specific HCI commands are exclusively for Espressif's Bluetooth Host (ESP-Bluedroid Host or ESP-NimBLE Host).
+//       If you are using a non-ESP host or HCI UART, these commands will remain disabled unless the initialization function is explicitly called from the application.
+//       Note, these init functions as well as these additional HCI VS commands are intended for Espressif's Bluetooth Host use only.
+//       Application developers **should not** call the init functions in their applications.
+//
+
+/**
+ * @brief Config scanning duplicate exceptional list (OCF: 0x0108)
+ *
+ * @note The init function is `advFilter_stack_eanbleDupExcListCmd(true)`
+ */
+#define ESP_BT_VS_CONFIG_DUP_EXC_LIST_OCF                           (0x0108)
+/**
+* @brief Update exception list cmd parameters
+*/
+struct bt_hci_vs_update_exc_list {
+    uint8_t subcode;    /*!< Add, remove or clear exception list */
+    uint32_t type;      /*!< device type */
+    uint8_t device_info[6]; /*!< device information */
+};
+
+/**
+ * @brief Enable/disable advertising report flow control (OCF: 0x0109)
+ *
+ * @note The init function is `scan_stack_enableAdvFlowCtrlVsCmd(true)`
+ */
+#define ESP_BT_VS_SET_ADV_REPORT_FLOW_CTRL_OCF                      (0x0109)
+/**
+* @brief Init ADV flow control cmd parameters
+*/
+struct bt_hci_vs_init_adv_flow_ctrl {
+    uint8_t enable; /*!< Enable ADV flow control */
+    uint16_t num;   /*!< ADV buffer maximum value */
+    uint16_t adv_lost_threshold; /*!< ADV lost event triggered threshold */
+};
+
+/**
+ * @brief Update the number of advertising report in ADV flow control (OCF: 0x010A)
+ *
+ * @note The init function is `scan_stack_enableAdvFlowCtrlVsCmd(true)`
+ */
+#define ESP_BT_VS_UPD_ADV_REPORT_FLOW_CTRL_NUM_OCF                  (0x010a)
+/**
+* @brief Update ADV flow control cmd parameters
+*/
+struct bt_hci_vs_update_adv_flow_ctrl {
+    uint16_t num; /*!< The number of ADV report processed */
+};
+
+/**
+ * @brief Clear legacy advertising (same as HCI_LE_Clear_Advertising_Sets) (OCF: 0x010C)
+ *
+ * @note The init function is `adv_stack_enableClearLegacyAdvVsCmd(true)`
+ */
+#define ESP_BT_VS_CLR_LEGACY_ADV_OCF                                (0x010c)
+/**
+* @brief Clear legacy ADV cmd parameters
+*/
+struct bt_hci_vs_ble_clr_legacy_adv {
+    // no parameters
+};
+
+/**
+ * @brief Set parameters of duplicate list (OCF: 0x010D)
+ *
+ * @note The init function is `advFilter_stack_eanbleDupExcListCmd(true)`
+ */
+#define ESP_BT_VS_SET_DUP_LIST_PARAMS_OCF                           (0x010d)
+/**
+* @brief Set duplicate list cmd parameters
+*/
+struct bt_hci_vs_ble_set_dup_params {
+    uint8_t dup_mode;           /*!< Duplicate mode */
+    uint8_t dup_ad_type;        /*!< Duplicate data type */
+    uint16_t ring_list_max_num; /*!< Duplicate list size */
+};
+
+/**
+ * @brief Enable/disable duplicate and exception list (OCF: 0x010E)
+ *
+ * @note The init function is `advFilter_stack_eanbleDupExcListCmd(true)`
+ */
+#define ESP_BT_VS_ENABLE_DUP_EXC_LIST_OCF                           (0x010e)
+/**
+* @brief Enable duplicate and exception list cmd parameters
+*/
+struct bt_hci_vs_ble_enable_dup_exc {
+    uint8_t enable;             /*!< Enable or disable */
+    uint8_t ring_list_reset;    /*!< Reset list */
+};
+
+/**
+ * @brief Enable optimization of multiple connections (OCF: 0x010F)
+ *
+ * @note The init function is `arr_stack_enableMultiConnVsCmd(true)`
+ */
+#define ESP_BT_VS_ENABLE_ARRANGEMENT_OCF                            (0x010f)
+/**
+* @brief Multiple connections optimization cmd parameters
+*/
+struct bt_hci_vs_ble_enable_arrangement {
+    uint32_t common_factor;     /*!< The greatest common factor of connection interval */
+    uint8_t enable;             /*!< Enable or disable */
+};
+
+/**
+ * @brief Set scheduling length for a certain role (OCF: 0x0110)
+ *
+ * @note The init function is `arr_stack_enableMultiConnVsCmd(true)`
+ */
+#define ESP_BT_VS_SET_SCHED_ROLE_LEN_OCF                            (0x0110)
+/**
+* @brief Scheduling length cmd parameters
+*/
+struct bt_hci_vs_ble_set_sched_role_len {
+    uint8_t role;   /*!< BLE role; 0: central; 1: peripheral */
+    uint32_t len;   /*!< Length is us */
+};
+
+/**
+ * @brief Set RSSI threshold for automatic power control (OCF: 0x0111)
+ *
+ * @note The init function is `pcl_stack_enableSetRssiThreshVsCmd(true)`
+ */
+#define ESP_BT_VS_SET_PCL_RSSI_THRESH_OCF                           (0x0111)
+/**
+* @brief PCL RSSI threshold cmd parameters
+*/
+struct bt_hci_vs_ble_set_pcl_rssi_thresh {
+    uint16_t conn_handle;           /*!< Connection handle */
+    uint8_t rssi_thresh_min_1M;     /*!< Lower limit for 1M */
+    uint8_t rssi_thresh_max_1M;     /*!< Upper limit for 1M */
+    uint8_t rssi_thresh_min_2M;     /*!< Lower limit for 2M */
+    uint8_t rssi_thresh_max_2M;     /*!< Upper limit for 2M */
+    uint8_t rssi_thresh_min_s2coded;    /*!< Lower limit for s2 coded */
+    uint8_t rssi_thresh_max_s2coded;    /*!< Upper limit for s2 coded */
+    uint8_t rssi_thresh_min_s8coded;    /*!< Lower limit for s8 coded */
+    uint8_t rssi_thresh_max_s8coded;    /*!< Upper limit for s8 coded */
+};
+
+/**
+ * @brief Enable/disable channel selection algorithm #2 (OCF: 0x0112)
+ *
+ * @note The init function is `chanSel_stack_enableSetCsaVsCmd(true)`
+ */
+#define ESP_BT_VS_ENABLE_CSA2_OCF                                   (0x0112)
+/**
+* @brief Enable/disable channel selection algorithm #2 cmd parameters
+*/
+struct bt_hci_vs_ble_csa_enable {
+    uint8_t csa2_select;  /*!< Select CSA2 */
+};
+
+/**
+ * @brief Set parameters of controller logs (OCF: 0x0114)
+ *
+ * @note The init function is `log_stack_enableLogsRelatedVsCmd(true)`
+ */
+#define ESP_BT_VS_SET_LOG_PARAMS_OCF                                (0x0114)
+/**
+* @brief Controller logs cmd parameters
+*/
+struct bt_hci_vs_ble_log_params {
+    uint8_t type;           /*!< Operation type */
+    uint32_t output_enable; /*!< Enable/disable output */
+    uint8_t buffer_optoin   /*!< Select log buffers */
+};
+
+/**
+ * @brief Set BLE vendor events mask (OCF: 0x0116)
+ *
+ * @note The init function is `hci_stack_enableSetVsEvtMaskVsCmd(true)`
+ */
+#define ESP_BT_VS_SET_LE_VENDOR_EVTS_MASK_OCF                       (0x0116)
+/**
+* @brief Set BLE vendor events mask cmd parameters
+*/
+struct bt_hci_vs_ble_set_vs_evts_mask {
+    uint32_t evt_masks; /*!< BLE vendor events Mask */
+};
+
+/**
+ * @brief Set peer sleep clock accuracy to a constant value (OCF: 0x0118)
+ *
+ * @note The init function is `winWiden_stack_enableSetConstPeerScaVsCmd(true)`
+ */
+#define ESP_BT_VS_SET_CONST_PEER_SCA_OCF                            (0x0118)
+/**
+* @brief Peer constant SCA cmd parameters
+*/
+struct bt_hci_vs_ble_set_const_peer_sca {
+    uint16_t peer_sca;  /*!< Peer SCA */
+};
+
+// @brief HCI VS Events for Espressif's Bluetooth Host
+//
+// @note The following HCI VS events are exclusively for Espressif's Bluetooth Host (ESP-Bluedroid Host or ESP-NimBLE Host).
+//       If you are using a non-ESP host or HCI UART, these events will remain disabled unless the initialization function is explicitly called from the application.
+//       Note, these init functions as well as these additional HCI VS events are intended for Espressif's Bluetooth Host use only.
+//       Application developers **should not** call the init functions in their applications.
+//
+
+/**
+ * @brief BLE Scan/Connect Request, Aux Connect Response received event (EVTCODE: 0xFF, SUBCODE: 0xC0)
+ *
+ * @note The init function is `adv_stack_enableScanReqRxdVsEvent(true)`
+ */
+#define ESP_BT_VS_LE_CONN_SCAN_REQ_RXED_EVT_SUBCODE                 (0xC0)
+/**
+* @brief BLE Scan/Connect Request, Aux Connect Response received event parameters
+*/
+struct bt_hci_vs_le_conn_scan_req_rxed_evt {
+    uint8_t evt_type;       /*!< Event type; 0: SCAN_REQ; 1: CONN_IND */
+    uint8_t handle;         /*!< Advertisement handle */
+    uint8_t peer_addr_type; /*!< Peer address type */
+    uint8_t peer_addr[6];   /*!< Peer address */
+};
+
+/**
+ * @brief BLE Channel Map Update Completion event (EVTCODE: 0xFF, SUBCODE: 0xC1)
+ *
+ * @note The init function is `conn_stack_enableChanMapUpdCompVsEvent(true)`
+ */
+#define ESP_BT_VS_LE_CHAN_UPDATE_COMP_EVT_SUBCODE                   (0xC1)
+/**
+* @brief BLE Channel Map Update Completion event parameters
+*/
+struct bt_hci_vs_le_chan_update_comp_evt {
+    uint8_t status;     /*!< Controller error code */
+    uint16_t handle;    /*!< Connection handle */
+    uint8_t ch_map[5];  /*!< Updated channel map */
+};
+
+/**
+ * @brief BLE Wakeup From Sleep event (EVTCODE: 0xFF, SUBCODE: 0xC3)
+ *
+ * @note The init function is `sleep_stack_enableWakeupVsEvent(true)`
+ */
+#define ESP_BT_VS_LE_SLEEP_WAKEUP_EVT_SUBCODE                       (0xC3)
+/**
+* @brief BLE wakeup event parameters
+*/
+struct bt_hci_vs_le_sleep_wakeup_evt {
+    // no parameters
+};
+
+/**
+ * @brief BLE advertising report lost event for flow control (EVTCODE: 0x3E, SUBCODE: 0xF0)
+ *
+ * @note The init function is `scan_stack_enableAdvFlowCtrlVsCmd(true)`
+ */
+#define ESP_BT_VS_LE_ADV_LOST_EVT_SUBCODE                           (0xF0)
+/**
+* @brief ADV lost event parameters
+*/
+struct bt_hci_vs_le_adv_lost_evt {
+    uint32_t nb_lost; /*!< The number of ADV report discarded */
+};
+
+//
+// @brief HCI VS Commands for Espressif's Internal-Use Debugging
+//
+//  @note The following HCI VS debugging commands are implemented in Bluetooth controller pre-compiled libraries.
+//        These commands are not linked into the application binary, unless the function `esp_ble_internalTestFeaturesEnable(true)`is called from the application.
+//        They are intended for Espressif's internal use only. Application developers **should not** call `esp_ble_internalTestFeaturesEnable(true)` in their applications.
+//
+
+#define ESP_BT_VS_CFG_TEST_RELATED_OCF                              (0x0113)
+    #define ESP_BT_VS_CFG_TEST_ENABLE_SUBCMD                        (0X00)
+    #define ESP_BT_VS_CFG_TEST_ENABLE_ADV_DELAY_SUBCMD              (0X01)
+    #define ESP_BT_VS_CFG_TEST_SET_PREF_CODED_SUBCMD                (0X02)
+    #define ESP_BT_VS_CFG_TEST_SET_DEFAULT_PRIV_MODE_SUBCMD         (0X03)
+    #define ESP_BT_VS_CFG_TEST_SET_SCAN_FOREVER_SUBCMD              (0X04)
+    #define ESP_BT_VS_CFG_TEST_SET_EXPECTED_PEER_SUBCMD             (0X05)
+    #define ESP_BT_VS_CFG_TEST_GET_ADV_TXED_CNT_SUBCMD              (0X06)
+    #define ESP_BT_VS_CFG_TEST_GET_SCAN_RXED_CNT_SUBCMD             (0X07)
+    #define ESP_BT_VS_CFG_TEST_SET_TXPWR_LVL_SUBCMD                 (0X08)
+    #define ESP_BT_VS_CFG_TEST_GET_TXPWR_LVL_SUBCMD                 (0X09)
+    #define ESP_BT_VS_CFG_TEST_SET_TXPWR_LVL_ENH_SUBCMD             (0X0a)
+    #define ESP_BT_VS_CFG_TEST_GET_TXPWR_LVL_ENH_SUBCMD             (0X0b)
+    #define ESP_BT_VS_CFG_TEST_IGNORE_WL_FOR_DIR_ADV_SUBCMD         (0X0c)
+    #define ESP_BT_VS_CFG_TEST_GET_ADV_RXED_RSSI_SUBCMD             (0X0d)
+    #define ESP_BT_VS_CFG_TEST_ENABLE_CCA_SUBCMD                    (0X0e)
+    #define ESP_BT_VS_CFG_TEST_SET_CCA_WIN_SUBCMD                   (0X0f)
+    #define ESP_BT_VS_CFG_TEST_READ_CCA_DATA_SUBCM                  (0X10)
+    #define ESP_BT_VS_CFG_TEST_CLEAR_RAND_ADDR_SUBCMD               (0X11)
+    #define ESP_BT_VS_CFG_TEST_GET_MAX_TXPWR_SUBCMD                 (0X12)
+    #define ESP_BT_VS_CFG_TEST_GET_TXPWR_RANGE_SUBCMD               (0X13)
+    #define ESP_BT_VS_CFG_TEST_SET_SCAN_AA_SUBCMD                   (0X14)
+    #define ESP_BT_VS_CFG_TEST_SET_ADV_AA_SUBCMD                    (0X15)
+    #define ESP_BT_VS_CFG_TEST_SET_SCAN_CHAN_SUBCMD                 (0X16)
+    #define ESP_BT_VS_CFG_TEST_SKIP_LIGHT_SLEEP_CHECK_SUBCMD        (0X17)
+    #define ESP_BT_VS_CFG_TEST_SET_WAKEUP_OVERHEAD_SUBCMD           (0X18)
+    #define ESP_BT_VS_CFG_TEST_GET_ADV_MIN_ITVL_SUBCMD              (0X19)
+    #define ESP_BT_VS_CFG_TEST_GET_CTRL_STATUS_SUBCMD               (0X1a)
+    #define ESP_BT_VS_CFG_TEST_SET_CONN_PHY_TXPWR_SUBCMD            (0X1b)
+    #define ESP_BT_VS_CFG_TEST_GET_CONN_PHY_TXPWR_SUBCMD            (0X1c)
+    #define ESP_BT_VS_CFG_TEST_GET_RXBUF_EMPTY_CNT_SUBCMD           (0X1d)
+    #define ESP_BT_VS_CFG_TEST_RESTART_SUBCMD                       (0X1e)
+    #define ESP_BT_VS_CFG_TEST_ENABLE_RECODE_RX_STATE_SUBCMD        (0X1f)
+    #define ESP_BT_VS_CFG_TEST_GET_RECODE_CNT_SUBCMD                (0X20)
+    #define ESP_BT_VS_CFG_TEST_CLR_RECODE_CNT_SUBCMD                (0X21)
+    #define ESP_BT_VS_CFG_TEST_GET_CTRL_COMPILE_VER_SUBCMD          (0X24)
+    #define ESP_BT_VS_CFG_TEST_SET_AUX_ADV_OFFSET_SUBCMD            (0X25)
+    #define ESP_BT_VS_CFG_TEST_INIT_FLEXIBLE_MODE_SUBCMD            (0X26)
+    #define ESP_BT_VS_CFG_TEST_ENABLE_FLEXIBLE_MODE_SUBCMD          (0X27)
+    #define ESP_BT_VS_CFG_TEST_SET_FLEXIBLE_CONN_ERR_SUBCMD         (0X28)
+    #define ESP_BT_VS_CFG_TEST_SET_FLEXIBLE_ADV_ERR_SUBCMD          (0X29)
+    #define ESP_BT_VS_CFG_TEST_SET_FLEXIBLE_SCAN_ERR_SUBCMD         (0X2a)
+    #define ESP_BT_VS_CFG_TEST_GET_TXED_CRCERR_SUBCMD               (0X2c)
+    #define ESP_BT_VS_CFG_TEST_GET_BACKOFF_UPLIMIT_SUBCMD           (0X2d)
+    #define ESP_BT_VS_CFG_TEST_GET_RXED_ADV_ADI_SUBCMD              (0X2f)
+    #define ESP_BT_VS_CFG_TEST_SET_SCH_RAND_MODE_SUBCMD             (0X30)
+    #define ESP_BT_VS_CFG_TEST_SET_RX_SENS_THRESH_SUBCMD            (0X31)
+    #define ESP_BT_VS_CFG_TEST_CHECK_MSYS_BUF_SUBCMD                (0X32)
+    #define ESP_BT_VS_CFG_TEST_UPDATE_BLE_TIMER_SUBCMD              (0X33)
+    #define ESP_BT_VS_CFG_TEST_UPDATE_BLE_RTC_SUBCMD                (0X34)
+    #define ESP_BT_VS_CFG_TEST_SET_LOCKED_MEM_NUM_SUBCMD            (0X35)
+    #define ESP_BT_VS_CFG_TEST_ALLOW_MEM_ALLOC_SUBCMD               (0X36)
+    #define ESP_BT_VS_CFG_TEST_SET_SCH_RAND_INFO_PTR_SUBCMD         (0X37)
+    #define ESP_BT_VS_CFG_TEST_SET_DIAG_IO_SUBCMD                   (0X38)
+    #define ESP_BT_VS_CFG_TEST_SET_AGC_MAX_GAIN_SUBCMD              (0X39)
+    #define ESP_BT_VS_CFG_TEST_ENABLE_CHAN_ASSESS_SUBCMD            (0X40)
+    #define ESP_BT_VS_CFG_TEST_SET_BACKOFF_UPLIMIT_SUBCMD           (0X41)
+    #define ESP_BT_VS_CFG_TEST_SET_CONN_TOP_PRIO_RESV_THRESH_SUBCMD (0X42)
+    #define ESP_BT_VS_CFG_TEST_SET_TEST_EVT_MSK_SUBCMD              (0X43)
+    #define ESP_BT_VS_CFG_TEST_GET_WAKEUP_TIMEOUT_SUBCMD            (0X45)
+    #define ESP_BT_VS_CFG_TEST_RELATED_SUBCMD_MAX                   (0Xff)
+
+//
+// @brief HCI VS Events for Espressif's Internal-Use Debugging
+//
+//  @note The following HCI VS debugging events are implemented in Bluetooth controller pre-compiled libraries.
+//    These events are not linked into the application binary, unless the function `esp_ble_internalTestFeaturesEnable(true)`is called from the application.
+//    Application developers **should not** call `esp_ble_internalTestFeaturesEnable(true)` in their applications.
+//
+
+#define ESP_BT_VS_LE_RUNNING_STATUS_EVT_SUBCODE                     (0xC3)
+
+
+#ifdef __cplusplus
+}
+#endif