diff options
Diffstat (limited to 'lib/bt/controller/esp32c2/esp_bt_cfg.h')
| -rw-r--r-- | lib/bt/controller/esp32c2/esp_bt_cfg.h | 112 |
1 files changed, 105 insertions, 7 deletions
diff --git a/lib/bt/controller/esp32c2/esp_bt_cfg.h b/lib/bt/controller/esp32c2/esp_bt_cfg.h index 0cb4168e..95a3c6b2 100644 --- a/lib/bt/controller/esp32c2/esp_bt_cfg.h +++ b/lib/bt/controller/esp32c2/esp_bt_cfg.h @@ -1,5 +1,5 @@ /* - * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD + * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ @@ -28,7 +28,6 @@ extern "C" { #else #define BLE_LL_SCAN_PHY_NUMBER_N (1) #endif - #define DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST MYNEWT_VAL(BLE_MAX_PERIODIC_ADVERTISER_LIST) #define DEFAULT_BT_LE_MAX_PERIODIC_SYNCS MYNEWT_VAL(BLE_MAX_PERIODIC_SYNCS) #define DEFAULT_BT_LE_MAX_CONNECTIONS MYNEWT_VAL(BLE_MAX_CONNECTIONS) @@ -46,6 +45,14 @@ extern "C" { #define DEFAULT_BT_LE_50_FEATURE_SUPPORT (0) #endif + #define DEGAULT_BT_LE_2M_PHY (CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_2M_PHY) + #define DEGAULT_BT_LE_CODED_PHY (CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_CODED_PHY) + #define DEFAULT_BT_LE_EXT_ADV (CONFIG_BT_NIMBLE_EXT_ADV) + #define DEFAULT_BT_LE_PERIODIC_ADV (CONFIG_BT_NIMBLE_ENABLE_PERIODIC_ADV) + #define DEFAULT_BT_LE_EXT_SCAN (CONFIG_BT_NIMBLE_EXT_SCAN) + #define DEFAULT_BT_LE_PERIODIC_SYNC (CONFIG_BT_NIMBLE_ENABLE_PERIODIC_SYNC) + #define DEFAULT_BT_LE_PAST (CONFIG_BT_NIMBLE_PERIODIC_ADV_SYNC_TRANSFER) + #define DEFAULT_BT_LE_ROLE_OBSERVER MYNEWT_VAL(BLE_ROLE_OBSERVER) #define DEFAULT_BT_LE_ROLE_CENTROL MYNEWT_VAL(BLE_ROLE_CENTRAL) #define DEFAULT_BT_LE_ROLE_PERIPHERAL MYNEWT_VAL(BLE_ROLE_PERIPHERAL) @@ -123,12 +130,55 @@ extern "C" { #else #define DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT (8) #endif + #if defined(CONFIG_BT_LE_50_FEATURE_SUPPORT) #define DEFAULT_BT_LE_50_FEATURE_SUPPORT (1) #else #define DEFAULT_BT_LE_50_FEATURE_SUPPORT (0) #endif + #if defined(CONFIG_BT_LE_LL_CFG_FEAT_LE_2M_PHY) + #define DEGAULT_BT_LE_2M_PHY (CONFIG_BT_LE_LL_CFG_FEAT_LE_2M_PHY) + #else + #define DEGAULT_BT_LE_2M_PHY (0) + #endif + + #if defined(CONFIG_BT_LE_LL_CFG_FEAT_LE_CODED_PHY) + #define DEGAULT_BT_LE_CODED_PHY (CONFIG_BT_LE_LL_CFG_FEAT_LE_CODED_PHY) + #else + #define DEGAULT_BT_LE_CODED_PHY (0) + #endif + + #if defined(CONFIG_BT_LE_EXT_ADV) + #define DEFAULT_BT_LE_EXT_ADV (CONFIG_BT_LE_EXT_ADV) + #else + #define DEFAULT_BT_LE_EXT_ADV (0) + #endif + + #if defined(CONFIG_BT_LE_ENABLE_PERIODIC_ADV) + #define DEFAULT_BT_LE_PERIODIC_ADV (CONFIG_BT_LE_ENABLE_PERIODIC_ADV) + #else + #define DEFAULT_BT_LE_PERIODIC_ADV (0) + #endif + + #if defined(CONFIG_BT_LE_EXT_SCAN) + #define DEFAULT_BT_LE_EXT_SCAN (CONFIG_BT_LE_EXT_SCAN) + #else + #define DEFAULT_BT_LE_EXT_SCAN (0) + #endif + + #if defined(CONFIG_BT_LE_ENABLE_PERIODIC_SYNC) + #define DEFAULT_BT_LE_PERIODIC_SYNC (CONFIG_BT_LE_ENABLE_PERIODIC_SYNC) + #else + #define DEFAULT_BT_LE_PERIODIC_SYNC (0) + #endif + + #if defined(BT_LE_PERIODIC_ADV_SYNC_TRANSFER) + #define DEFAULT_BT_LE_PAST (BT_LE_PERIODIC_ADV_SYNC_TRANSFER) + #else + #define DEFAULT_BT_LE_PAST (0) + #endif + #if defined(CONFIG_BT_LE_ROLE_CENTROL_ENABLE) #define DEFAULT_BT_LE_ROLE_CENTROL (1) #else @@ -152,16 +202,68 @@ extern "C" { #else #define DEFAULT_BT_LE_ROLE_OBSERVER (0) #endif + #if defined (CONFIG_BT_LE_HCI_UART_FLOWCTRL) + #define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (CONFIG_BT_LE_HCI_UART_FLOWCTRL) + #if DEFAULT_BT_LE_HCI_UART_FLOW_CTRL + #define DEFAULT_BT_LE_HCI_UART_CTS_PIN (CONFIG_BT_LE_HCI_UART_CTS_PIN) + #define DEFAULT_BT_LE_HCI_UART_RTS_PIN (CONFIG_BT_LE_HCI_UART_RTS_PIN) + #else + #define DEFAULT_BT_LE_HCI_UART_CTS_PIN (-1) + #define DEFAULT_BT_LE_HCI_UART_RTS_PIN (-1) + #endif + #else + #define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (0) + #define DEFAULT_BT_LE_HCI_UART_CTS_PIN (-1) + #define DEFAULT_BT_LE_HCI_UART_RTS_PIN (-1) + #endif #endif #define DEFAULT_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF CONFIG_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF +#ifdef CONFIG_BT_LE_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS +#define DEFAULT_BT_LE_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS (CONFIG_BT_LE_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS) +#else +#define DEFAULT_BT_LE_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS (0) +#endif + +#ifdef CONFIG_BT_LE_CTRL_LLCP_CONN_UPDATE +#define BT_CTRL_BLE_LLCP_CONN_UPDATE (1<<0) +#else +#define BT_CTRL_BLE_LLCP_CONN_UPDATE (0<<0) +#endif + +#ifdef CONFIG_BT_LE_CTRL_LLCP_CHAN_MAP_UPDATE +#define BT_CTRL_BLE_LLCP_CHAN_MAP_UPDATE (1<<1) +#else +#define BT_CTRL_BLE_LLCP_CHAN_MAP_UPDATE (0<<1) +#endif + +#ifdef CONFIG_BT_LE_CTRL_LLCP_PHY_UPDATE +#define BT_CTRL_BLE_LLCP_PHY_UPDATE (1<<2) +#else +#define BT_CTRL_BLE_LLCP_PHY_UPDATE (0<<2) +#endif + +#define BT_LE_CTRL_LLCP_DISC_FLAG (BT_CTRL_BLE_LLCP_CONN_UPDATE | BT_CTRL_BLE_LLCP_CHAN_MAP_UPDATE | BT_CTRL_BLE_LLCP_PHY_UPDATE) + +#ifdef CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX +#define BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX (CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX) +#else +#define BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX (256) +#endif + #ifdef CONFIG_BT_LE_HCI_INTERFACE_USE_UART #define HCI_UART_EN CONFIG_BT_LE_HCI_INTERFACE_USE_UART #else #define HCI_UART_EN 0 // hci ram mode #endif +#ifdef CONFIG_BT_LE_HCI_INTERFACE_USE_RAM +#define DEFAULT_BT_LE_VHCI_ENABLED (CONFIG_BT_LE_HCI_INTERFACE_USE_RAM) +#else +#define DEFAULT_BT_LE_VHCI_ENABLED (0) +#endif + #ifdef CONFIG_BT_LE_SLEEP_ENABLE #define NIMBLE_SLEEP_ENABLE CONFIG_BT_LE_SLEEP_ENABLE #else @@ -192,8 +294,6 @@ extern "C" { #define DEFAULT_BT_LE_HCI_UART_DATA_BITS (UART_DATA_8_BITS) #define DEFAULT_BT_LE_HCI_UART_STOP_BITS (UART_STOP_BITS_1) #define DEFAULT_BT_LE_HCI_UART_PARITY (0) - #define DEFAULT_BT_LE_HCI_UART_TASK_STACK_SIZE (CONFIG_BT_LE_HCI_UART_TASK_STACK_SIZE) - #define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (0) #else #define DEFAULT_BT_LE_HCI_UART_TX_PIN (0) #define DEFAULT_BT_LE_HCI_UART_RX_PIN (0) @@ -202,8 +302,6 @@ extern "C" { #define DEFAULT_BT_LE_HCI_UART_DATA_BITS (0) #define DEFAULT_BT_LE_HCI_UART_STOP_BITS (0) #define DEFAULT_BT_LE_HCI_UART_PARITY (0) - #define DEFAULT_BT_LE_HCI_UART_TASK_STACK_SIZE (0) - #define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (0) #endif /* Unchanged configuration */ @@ -232,7 +330,7 @@ extern "C" { #define RTC_FREQ_N (32000) /* in Hz */ #endif // CONFIG_XTAL_FREQ_26 -#define BLE_LL_TX_PWR_DBM_N (9) +#define BLE_LL_TX_PWR_DBM_N (CONFIG_BT_LE_DFT_TX_POWER_LEVEL_DBM_EFF) #define RUN_BQB_TEST (0) |