diff options
Diffstat (limited to 'lib/bt/controller/esp32c6/esp_bt_cfg.h')
| -rw-r--r-- | lib/bt/controller/esp32c6/esp_bt_cfg.h | 89 |
1 files changed, 82 insertions, 7 deletions
diff --git a/lib/bt/controller/esp32c6/esp_bt_cfg.h b/lib/bt/controller/esp32c6/esp_bt_cfg.h index 9e341e32..f22c4c75 100644 --- a/lib/bt/controller/esp32c6/esp_bt_cfg.h +++ b/lib/bt/controller/esp32c6/esp_bt_cfg.h @@ -1,5 +1,5 @@ /* - * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD + * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ @@ -40,6 +40,7 @@ extern "C" { #define DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT MYNEWT_VAL(BLE_TRANSPORT_EVT_COUNT) #define DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT MYNEWT_VAL(BLE_TRANSPORT_EVT_DISCARDABLE_COUNT) #define DEFAULT_BT_LE_POWER_CONTROL_ENABLED MYNEWT_VAL(BLE_POWER_CONTROL) + #define DEFAULT_BT_LE_SUBRATE_ENABLED MYNEWT_VAL(BLE_CONN_SUBRATING) #if defined(CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT) #define DEFAULT_BT_LE_50_FEATURE_SUPPORT (1) #else @@ -129,16 +130,95 @@ extern "C" { #else #define DEFAULT_BT_LE_50_FEATURE_SUPPORT (0) #endif + + #if defined (CONFIG_BT_LE_HCI_UART_FLOWCTRL) + #define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (CONFIG_BT_LE_HCI_UART_FLOWCTRL) + #if DEFAULT_BT_LE_HCI_UART_FLOW_CTRL + #define DEFAULT_BT_LE_HCI_UART_CTS_PIN (CONFIG_BT_LE_HCI_UART_CTS_PIN) + #define DEFAULT_BT_LE_HCI_UART_RTS_PIN (CONFIG_BT_LE_HCI_UART_RTS_PIN) + #else + #define DEFAULT_BT_LE_HCI_UART_CTS_PIN (-1) + #define DEFAULT_BT_LE_HCI_UART_RTS_PIN (-1) + #endif + #else + #define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (0) + #define DEFAULT_BT_LE_HCI_UART_CTS_PIN (-1) + #define DEFAULT_BT_LE_HCI_UART_RTS_PIN (-1) + #endif + + #define DEFAULT_BT_LE_SUBRATE_ENABLED 0 #endif #define DEFAULT_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF CONFIG_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF +#ifdef CONFIG_BT_LE_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS +#define DEFAULT_BT_LE_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS (CONFIG_BT_LE_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS) +#else +#define DEFAULT_BT_LE_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS (0) +#endif + +#ifdef CONFIG_BT_LE_CTRL_LLCP_CONN_UPDATE +#define BT_CTRL_BLE_LLCP_CONN_UPDATE (1<<0) +#else +#define BT_CTRL_BLE_LLCP_CONN_UPDATE (0<<0) +#endif + +#ifdef CONFIG_BT_LE_CTRL_LLCP_CHAN_MAP_UPDATE +#define BT_CTRL_BLE_LLCP_CHAN_MAP_UPDATE (1<<1) +#else +#define BT_CTRL_BLE_LLCP_CHAN_MAP_UPDATE (0<<1) +#endif + +#ifdef CONFIG_BT_LE_CTRL_LLCP_PHY_UPDATE +#define BT_CTRL_BLE_LLCP_PHY_UPDATE (1<<2) +#else +#define BT_CTRL_BLE_LLCP_PHY_UPDATE (0<<2) +#endif + +#define BT_LE_CTRL_LLCP_DISC_FLAG (BT_CTRL_BLE_LLCP_CONN_UPDATE | BT_CTRL_BLE_LLCP_CHAN_MAP_UPDATE | BT_CTRL_BLE_LLCP_PHY_UPDATE) + +#ifdef CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX +#define BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX (CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX) +#else +#define BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX (256) +#endif + +#if defined(CONFIG_BT_LE_CTRL_CHAN_ASS_EN) +#define DEFAULT_BT_LE_CTRL_CHAN_ASS_EN (CONFIG_BT_LE_CTRL_CHAN_ASS_EN) +#else +#define DEFAULT_BT_LE_CTRL_CHAN_ASS_EN (0) +#endif + +#if defined(CONFIG_BT_LE_CTRL_ADV_DATA_LENGTH_ZERO_AUX) +#define DEFAULT_BT_LE_CTRL_ADV_DATA_LENGTH_ZERO_AUX (CONFIG_BT_LE_CTRL_ADV_DATA_LENGTH_ZERO_AUX) +#else +#define DEFAULT_BT_LE_CTRL_ADV_DATA_LENGTH_ZERO_AUX (0) +#endif + +#if defined(CONFIG_BT_LE_CTRL_FAST_CONN_DATA_TX_EN) +#define DEFAULT_BT_LE_CTRL_FAST_CONN_DATA_TX_EN (CONFIG_BT_LE_CTRL_FAST_CONN_DATA_TX_EN) +#else +#define DEFAULT_BT_LE_CTRL_FAST_CONN_DATA_TX_EN (0) +#endif + #ifdef CONFIG_BT_LE_HCI_INTERFACE_USE_UART #define HCI_UART_EN CONFIG_BT_LE_HCI_INTERFACE_USE_UART #else #define HCI_UART_EN 0 // hci ram mode #endif +#ifdef CONFIG_BT_LE_HCI_INTERFACE_USE_RAM +#define DEFAULT_BT_LE_VHCI_ENABLED (CONFIG_BT_LE_HCI_INTERFACE_USE_RAM) +#else +#define DEFAULT_BT_LE_VHCI_ENABLED (0) +#endif + +#ifdef CONFIG_BT_LE_PTR_CHECK_ENABLED +#define DEFAULT_BT_LE_PTR_CHECK_ENABLED (CONFIG_BT_LE_PTR_CHECK_ENABLED) +#else +#define DEFAULT_BT_LE_PTR_CHECK_ENABLED (0) +#endif + #ifdef CONFIG_BT_LE_SLEEP_ENABLE #define NIMBLE_SLEEP_ENABLE CONFIG_BT_LE_SLEEP_ENABLE #else @@ -169,8 +249,6 @@ extern "C" { #define DEFAULT_BT_LE_HCI_UART_DATA_BITS (UART_DATA_8_BITS) #define DEFAULT_BT_LE_HCI_UART_STOP_BITS (UART_STOP_BITS_1) #define DEFAULT_BT_LE_HCI_UART_PARITY (0) - #define DEFAULT_BT_LE_HCI_UART_TASK_STACK_SIZE (CONFIG_BT_LE_HCI_UART_TASK_STACK_SIZE) - #define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (0) #else #define DEFAULT_BT_LE_HCI_UART_TX_PIN (0) #define DEFAULT_BT_LE_HCI_UART_RX_PIN (0) @@ -179,8 +257,6 @@ extern "C" { #define DEFAULT_BT_LE_HCI_UART_DATA_BITS (0) #define DEFAULT_BT_LE_HCI_UART_STOP_BITS (0) #define DEFAULT_BT_LE_HCI_UART_PARITY (0) - #define DEFAULT_BT_LE_HCI_UART_TASK_STACK_SIZE (0) - #define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (0) #endif /* Unchanged configuration */ @@ -205,8 +281,7 @@ extern "C" { #define RTC_FREQ_N (32768) /* in Hz */ -#define BLE_LL_TX_PWR_DBM_N (9) - +#define BLE_LL_TX_PWR_DBM_N (CONFIG_BT_LE_DFT_TX_POWER_LEVEL_DBM_EFF) #define RUN_BQB_TEST (0) #define RUN_QA_TEST (0) |