diff options
Diffstat (limited to 'lib/bt/esp_ble_mesh/Kconfig.in')
| -rw-r--r-- | lib/bt/esp_ble_mesh/Kconfig.in | 520 |
1 files changed, 308 insertions, 212 deletions
diff --git a/lib/bt/esp_ble_mesh/Kconfig.in b/lib/bt/esp_ble_mesh/Kconfig.in index 216ab39a..eb761a5e 100644 --- a/lib/bt/esp_ble_mesh/Kconfig.in +++ b/lib/bt/esp_ble_mesh/Kconfig.in @@ -6,22 +6,97 @@ if BLE_MESH help It is a temporary solution and needs further modifications. + config BLE_MESH_V11_SUPPORT + bool "Support ESP BLE Mesh v1.1 features (Preview)" + default y + help + Support BLE Mesh v1.1 features + config BLE_MESH_RANDOM_ADV_INTERVAL bool "Support using random adv interval for mesh packets" select BT_BLE_HIGH_DUTY_ADV_INTERVAL if BT_BLUEDROID_ENABLED + select BT_NIMBLE_HIGH_DUTY_ADV_ITVL if BT_NIMBLE_ENABLED default n help Enable this option to allow using random advertising interval for mesh packets. And this could help avoid collision of advertising packets. + menuconfig BLE_MESH_USE_BLE_50 + bool "Support using BLE 5.0 APIs for BLE Mesh" + depends on BLE_MESH_EXPERIMENTAL + select BT_NIMBLE_50_FEATURE_SUPPORT if BT_NIMBLE_ENABLED + select BT_NIMBLE_EXT_ADV if BT_NIMBLE_ENABLED + select BT_BLE_50_FEATURES_SUPPORTED if BT_BLUEDROID_ENABLED + select BT_LE_50_FEATURE_SUPPORT if IDF_TARGET_ESP32C6 || IDF_TARGET_ESP32H2 + default n + help + This option to enable BLE Mesh using some BLE 5.0 APIs. + + config BLE_MESH_ADV_INST_ID + depends on BLE_MESH_USE_BLE_50 + int "Extended adv instance for Mesh normal packets" + default 0 + range 0 3 + help + Extended ADV instance used by Mesh normal advertising packets. + + menuconfig BLE_MESH_SUPPORT_MULTI_ADV + bool "Support using multiple adv instance for BLE Mesh" + depends on BLE_MESH_USE_BLE_50 + default n + help + Enable this option to support using multiple adv instance while running BLE Mesh. + + config BLE_MESH_PROXY_ADV_INST_ID + int "Extended adv instance for Mesh proxy packets" + depends on BLE_MESH_PROXY + depends on (BLE_MESH_PB_GATT || BLE_MESH_GATT_PROXY_SERVER) + depends on BLE_MESH_SUPPORT_MULTI_ADV + default 1 + range 0 3 + help + Extended ADV instance used by Mesh proxy advertising packets. + + menuconfig BLE_MESH_SEPARATE_RELAY_ADV_INSTANCE + bool "Use separate extended adv instance for Mesh relay packets" + depends on BLE_MESH_SUPPORT_MULTI_ADV + depends on BLE_MESH_RELAY_ADV_BUF + default n + help + Enable this option to support using a separate extended ADV instance for Mesh relay packets. + + config BLE_MESH_RELAY_ADV_INST_ID + int "Extended adv instance for Mesh relay packets" + depends on BLE_MESH_SEPARATE_RELAY_ADV_INSTANCE + default 2 + range 0 3 + help + Extended ADV instance used by Mesh relay advertising packets. + + menuconfig BLE_MESH_SEPARATE_BLE_ADV_INSTANCE + bool "Use separate extended adv instance for BLE normal packets" + depends on BLE_MESH_SUPPORT_MULTI_ADV + depends on BLE_MESH_SUPPORT_BLE_ADV + default n + help + Enable this option to support using a separate extended ADV instance for normal BLE advertising packets. + + config BLE_MESH_BLE_ADV_INST_ID + int "Extended adv instance for normal BLE packets" + depends on BLE_MESH_SEPARATE_BLE_ADV_INSTANCE + default 3 + range 0 3 + help + Extended ADV instance used by normal BLE advertising packets. + config BLE_MESH_USE_DUPLICATE_SCAN bool "Support Duplicate Scan in BLE Mesh" select BTDM_BLE_SCAN_DUPL if IDF_TARGET_ESP32 select BTDM_BLE_MESH_SCAN_DUPL_EN if IDF_TARGET_ESP32 select BT_CTRL_BLE_SCAN_DUPL if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S3 select BT_CTRL_BLE_MESH_SCAN_DUPL_EN if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S3 - select BT_LE_SCAN_DUPL if IDF_TARGET_ESP32C6 || IDF_TARGET_ESP32H2 + select BT_LE_SCAN_DUPL if IDF_TARGET_ESP32C6 || IDF_TARGET_ESP32H2 || IDF_TARGET_ESP32C61 || IDF_TARGET_ESP32C5 select BT_NIMBLE_VS_SUPPORT if BT_NIMBLE_ENABLED default y help @@ -32,6 +107,7 @@ if BLE_MESH config BLE_MESH_ACTIVE_SCAN bool "Support Active Scan in BLE Mesh" + depends on BLE_MESH_V11_SUPPORT help Enable this option to allow using BLE Active Scan for BLE Mesh. @@ -281,6 +357,7 @@ if BLE_MESH config BLE_MESH_PROV_EPA bool "BLE Mesh enhanced provisioning authentication" depends on BLE_MESH_PROV + depends on BLE_MESH_V11_SUPPORT default y help Enable this option to support BLE Mesh enhanced provisioning authentication @@ -290,6 +367,7 @@ if BLE_MESH config BLE_MESH_CERT_BASED_PROV bool "Support Certificate-based provisioning" depends on BLE_MESH_PROV + depends on BLE_MESH_V11_SUPPORT default n help Enable this option to support BLE Mesh Certificate-Based Provisioning. @@ -390,6 +468,7 @@ if BLE_MESH config BLE_MESH_PROXY_SOLIC_PDU_RX bool "Support receiving Proxy Solicitation PDU" depends on BLE_MESH_GATT_PROXY_SERVER + depends on BLE_MESH_V11_SUPPORT help Enable this option to support receiving Proxy Solicitation PDU. @@ -397,7 +476,7 @@ if BLE_MESH int "Maximum capacity of solicitation replay protection list" depends on BLE_MESH_PROXY_SOLIC_PDU_RX default 2 - range 1 255 + range 1 65536 help This option specifies the maximum capacity of the solicitation replay protection list. The solicitation replay protection list is used to @@ -405,6 +484,13 @@ if BLE_MESH will store the solicitation src and solicitation sequence number of the received Solicitation PDU message. + config BLE_MESH_PROXY_CLI_SRV_COEXIST + bool "Support Proxy Client and Proxy Server coexistence" + depends on BLE_MESH_EXPERIMENTAL + default n + help + Enable this option to support the coexistence of proxy client and proxy server. + config BLE_MESH_GATT_PROXY_CLIENT bool "BLE Mesh GATT Proxy Client" select BLE_MESH_PROXY @@ -417,6 +503,7 @@ if BLE_MESH config BLE_MESH_PROXY_SOLIC_PDU_TX bool "Support sending Proxy Solicitation PDU" depends on BLE_MESH_GATT_PROXY_CLIENT + depends on BLE_MESH_V11_SUPPORT help Enable this option to support sending Proxy Solicitation PDU. @@ -703,6 +790,7 @@ if BLE_MESH to perform the IV index recovery procedure. config BLE_MESH_SAR_ENHANCEMENT + depends on BLE_MESH_V11_SUPPORT bool "Segmentation and reassembly enhancement" default n help @@ -1102,253 +1190,257 @@ if BLE_MESH help Enable support for Health Server model. - config BLE_MESH_BRC_CLI - bool "Bridge Configuration Client model" - help - Enable support for Bridge Configuration Client model. - - config BLE_MESH_BRC_SRV - bool "Bridge Configuration Server model" - default n - help - Enable support for Bridge Configuration Server model. - - if BLE_MESH_BRC_SRV + if BLE_MESH_V11_SUPPORT - config BLE_MESH_MAX_BRIDGING_TABLE_ENTRY_COUNT - int "Maximum number of Bridging Table entries" - range 16 65535 - default 16 + config BLE_MESH_BRC_CLI + bool "Bridge Configuration Client model" help - Maximum number of Bridging Table entries that the Bridge Configuration Server can support. + Enable support for Bridge Configuration Client model. - config BLE_MESH_BRIDGE_CRPL - int "Maximum capacity of bridge replay protection list" - default 5 - range 1 255 + config BLE_MESH_BRC_SRV + bool "Bridge Configuration Server model" + default n help - This option specifies the maximum capacity of the bridge replay - protection list. The bridge replay protection list is used to - prevent a bridged subnet from replay attack, which will store the - source address and sequence number of the received bridge messages. + Enable support for Bridge Configuration Server model. - endif #BLE_MESH_BRC_SRV + if BLE_MESH_BRC_SRV - config BLE_MESH_PRB_CLI - bool "Mesh Private Beacon Client model" - help - Enable support for Mesh Private Beacon Client model. + config BLE_MESH_MAX_BRIDGING_TABLE_ENTRY_COUNT + int "Maximum number of Bridging Table entries" + range 16 65535 + default 16 + help + Maximum number of Bridging Table entries that the Bridge Configuration Server can support. - config BLE_MESH_PRB_SRV - bool "Mesh Private Beacon Server model" - help - Enable support for Mesh Private Beacon Server model. + config BLE_MESH_BRIDGE_CRPL + int "Maximum capacity of bridge replay protection list" + default 5 + range 1 255 + help + This option specifies the maximum capacity of the bridge replay + protection list. The bridge replay protection list is used to + prevent a bridged subnet from replay attack, which will store the + source address and sequence number of the received bridge messages. - config BLE_MESH_ODP_CLI - bool "On-Demand Private Proxy Client model" - help - Enable support for On-Demand Private Proxy Client model. + endif #BLE_MESH_BRC_SRV - config BLE_MESH_ODP_SRV - bool "On-Demand Private Proxy Server model" - depends on BLE_MESH_PROXY_SOLIC_PDU_RX - select BLE_MESH_SRPL_SRV - help - Enable support for On-Demand Private Proxy Server model. + config BLE_MESH_PRB_CLI + bool "Mesh Private Beacon Client model" + help + Enable support for Mesh Private Beacon Client model. - config BLE_MESH_SRPL_CLI - bool "Solicitation PDU RPL Configuration Client model" - help - Enable support for Solicitation PDU RPL Configuration Client model. + config BLE_MESH_PRB_SRV + bool "Mesh Private Beacon Server model" + help + Enable support for Mesh Private Beacon Server model. - config BLE_MESH_SRPL_SRV - bool "Solicitation PDU RPL Configuration Server model" - depends on BLE_MESH_PROXY_SOLIC_PDU_RX - help - Enable support for Solicitation PDU RPL Configuration Server model. - Note: - This option depends on the functionality of receiving Solicitation - PDU. If the device doesn't support receiving Solicitation PDU, then - there is no need to enable this server model. + config BLE_MESH_ODP_CLI + bool "On-Demand Private Proxy Client model" + help + Enable support for On-Demand Private Proxy Client model. - config BLE_MESH_AGG_CLI - bool "Opcodes Aggregator Client model" - help - Enable support for Opcodes Aggregator Client model. + config BLE_MESH_ODP_SRV + bool "On-Demand Private Proxy Server model" + depends on BLE_MESH_PROXY_SOLIC_PDU_RX + select BLE_MESH_SRPL_SRV + help + Enable support for On-Demand Private Proxy Server model. - config BLE_MESH_AGG_SRV - bool "Opcodes Aggregator Server model" - help - Enable support for Opcodes Aggregator Server model. + config BLE_MESH_SRPL_CLI + bool "Solicitation PDU RPL Configuration Client model" + help + Enable support for Solicitation PDU RPL Configuration Client model. - config BLE_MESH_SAR_CLI - bool "SAR Configuration Client model" - help - Enable support for SAR Configuration Client model. + config BLE_MESH_SRPL_SRV + bool "Solicitation PDU RPL Configuration Server model" + depends on BLE_MESH_PROXY_SOLIC_PDU_RX + help + Enable support for Solicitation PDU RPL Configuration Server model. + Note: + This option depends on the functionality of receiving Solicitation + PDU. If the device doesn't support receiving Solicitation PDU, then + there is no need to enable this server model. + + config BLE_MESH_AGG_CLI + bool "Opcodes Aggregator Client model" + help + Enable support for Opcodes Aggregator Client model. - config BLE_MESH_SAR_SRV - bool "SAR Configuration Server model" - help - Enable support for SAR Configuration Server model. + config BLE_MESH_AGG_SRV + bool "Opcodes Aggregator Server model" + help + Enable support for Opcodes Aggregator Server model. - config BLE_MESH_COMP_DATA_1 - bool "Support Composition Data Page 1" - help - Composition Data Page 1 contains information about the relationships - among models. - Each model either can be a root model or can extend other models. + config BLE_MESH_SAR_CLI + bool "SAR Configuration Client model" + help + Enable support for SAR Configuration Client model. - config BLE_MESH_COMP_DATA_128 - bool "Support Composition Data Page 128" - help - Composition Data Page 128 is used to indicate the structure of - elements, features, and models of a node after the successful - execution of the Node Address Refresh procedure or the Node - Composition Refresh procedure, or after the execution of the - Node Removal procedure followed by the provisioning process. - Composition Data Page 128 shall be present if the node supports - the Remote Provisioning Server model; otherwise it is optional. + config BLE_MESH_SAR_SRV + bool "SAR Configuration Server model" + help + Enable support for SAR Configuration Server model. - config BLE_MESH_MODELS_METADATA_0 - bool "Support Models Metadata Page 0" - help - The Models Metadata state contains metadata of a node’s models. - The Models Metadata state is composed of a number of pages of - information. - Models Metadata Page 0 shall be present if the node supports - the Large Composition Data Server model. + config BLE_MESH_COMP_DATA_1 + bool "Support Composition Data Page 1" + help + Composition Data Page 1 contains information about the relationships + among models. + Each model either can be a root model or can extend other models. - config BLE_MESH_MODELS_METADATA_128 - bool "Support Models Metadata Page 128" - depends on BLE_MESH_MODELS_METADATA_0 - help - The Models Metadata state contains metadata of a node’s models. - The Models Metadata state is composed of a number of pages of - information. - Models Metadata Page 128 contains metadata for the node’s models - after the successful execution of the Node Address Refresh - procedure or the Node Composition Refresh procedure, or after - the execution of the Node Removal procedure followed by the - provisioning process. - Models Metadata Page 128 shall be present if the node supports - the Remote Provisioning Server model and the node supports the - Large Composition Data Server model. + config BLE_MESH_COMP_DATA_128 + bool "Support Composition Data Page 128" + help + Composition Data Page 128 is used to indicate the structure of + elements, features, and models of a node after the successful + execution of the Node Address Refresh procedure or the Node + Composition Refresh procedure, or after the execution of the + Node Removal procedure followed by the provisioning process. + Composition Data Page 128 shall be present if the node supports + the Remote Provisioning Server model; otherwise it is optional. + + config BLE_MESH_MODELS_METADATA_0 + bool "Support Models Metadata Page 0" + help + The Models Metadata state contains metadata of a node’s models. + The Models Metadata state is composed of a number of pages of + information. + Models Metadata Page 0 shall be present if the node supports + the Large Composition Data Server model. + + config BLE_MESH_MODELS_METADATA_128 + bool "Support Models Metadata Page 128" + depends on BLE_MESH_MODELS_METADATA_0 + help + The Models Metadata state contains metadata of a node’s models. + The Models Metadata state is composed of a number of pages of + information. + Models Metadata Page 128 contains metadata for the node’s models + after the successful execution of the Node Address Refresh + procedure or the Node Composition Refresh procedure, or after + the execution of the Node Removal procedure followed by the + provisioning process. + Models Metadata Page 128 shall be present if the node supports + the Remote Provisioning Server model and the node supports the + Large Composition Data Server model. + + config BLE_MESH_LCD_CLI + bool "Large Composition Data Client model" + help + Enable support for Large Composition Data Client model. - config BLE_MESH_LCD_CLI - bool "Large Composition Data Client model" - help - Enable support for Large Composition Data Client model. + config BLE_MESH_LCD_SRV + bool "Large Composition Data Server model" + select BLE_MESH_MODELS_METADATA_0 + help + Enable support for Large Composition Data Server model. - config BLE_MESH_LCD_SRV - bool "Large Composition Data Server model" - select BLE_MESH_MODELS_METADATA_0 - help - Enable support for Large Composition Data Server model. + config BLE_MESH_RPR_CLI + bool "Remote Provisioning Client model" + depends on BLE_MESH_PROVISIONER + select BLE_MESH_PROV + help + Enable support for Remote Provisioning Client model - config BLE_MESH_RPR_CLI - bool "Remote Provisioning Client model" - depends on BLE_MESH_PROVISIONER - select BLE_MESH_PROV - help - Enable support for Remote Provisioning Client model + if BLE_MESH_RPR_CLI - if BLE_MESH_RPR_CLI + config BLE_MESH_RPR_CLI_PROV_SAME_TIME + int "Maximum number of PB-Remote running at the same time by Provisioner" + range 1 5 + default 2 + help + This option specifies how many devices can be provisioned at the same time + using PB-REMOTE. For example, if the value is 2, it means a Provisioner can + provision two unprovisioned devices with PB-REMOTE at the same time. - config BLE_MESH_RPR_CLI_PROV_SAME_TIME - int "Maximum number of PB-Remote running at the same time by Provisioner" - range 1 5 - default 2 + endif # BLE_MESH_RPR_CLI + + config BLE_MESH_RPR_SRV + bool "Remote Provisioning Server model" + depends on BLE_MESH_NODE + select BLE_MESH_PB_ADV help - This option specifies how many devices can be provisioned at the same time - using PB-REMOTE. For example, if the value is 2, it means a Provisioner can - provision two unprovisioned devices with PB-REMOTE at the same time. + Enable support for Remote Provisioning Server model - endif # BLE_MESH_RPR_CLI + if BLE_MESH_RPR_SRV - config BLE_MESH_RPR_SRV - bool "Remote Provisioning Server model" - depends on BLE_MESH_NODE - select BLE_MESH_PB_ADV - help - Enable support for Remote Provisioning Server model + config BLE_MESH_RPR_SRV_MAX_SCANNED_ITEMS + int "Maximum number of device information can be scanned" + range 4 255 + default 10 + help + This option specifies how many device information can a Remote + Provisioning Server store each time while scanning. - if BLE_MESH_RPR_SRV + config BLE_MESH_RPR_SRV_ACTIVE_SCAN + bool "Support Active Scan for remote provisioning" + select BLE_MESH_ACTIVE_SCAN + help + Enable this option to support Active Scan for remote provisioning. - config BLE_MESH_RPR_SRV_MAX_SCANNED_ITEMS - int "Maximum number of device information can be scanned" - range 4 255 - default 10 - help - This option specifies how many device information can a Remote - Provisioning Server store each time while scanning. + config BLE_MESH_RPR_SRV_MAX_EXT_SCAN + int "Maximum number of extended scan procedures" + range 1 10 + default 1 + help + This option specifies how many extended scan procedures can be + started by the Remote Provisioning Server. - config BLE_MESH_RPR_SRV_ACTIVE_SCAN - bool "Support Active Scan for remote provisioning" - select BLE_MESH_ACTIVE_SCAN - help - Enable this option to support Active Scan for remote provisioning. + endif # BLE_MESH_RPR_SRV - config BLE_MESH_RPR_SRV_MAX_EXT_SCAN - int "Maximum number of extended scan procedures" - range 1 10 - default 1 + config BLE_MESH_DF_CLI + bool "Directed Forwarding Configuration Client model" help - This option specifies how many extended scan procedures can be - started by the Remote Provisioning Server. + Enable support for Directed Forwarding Configuration Client model. - endif # BLE_MESH_RPR_SRV + config BLE_MESH_DF_SRV + bool "Directed Forwarding Configuration Server model" + help + Enable support for Directed Forwarding Configuration Server model. - config BLE_MESH_DF_CLI - bool "Directed Forwarding Configuration Client model" - help - Enable support for Directed Forwarding Configuration Client model. + if BLE_MESH_DF_SRV - config BLE_MESH_DF_SRV - bool "Directed Forwarding Configuration Server model" - help - Enable support for Directed Forwarding Configuration Server model. + config BLE_MESH_MAX_DISC_TABLE_ENTRY_COUNT + int "Maximum number of discovery table entries in a given subnet" + range 2 255 + default 2 + help + Maximum number of Discovery Table entries supported by the node in a given subnet. - if BLE_MESH_DF_SRV + config BLE_MESH_MAX_FORWARD_TABLE_ENTRY_COUNT + int "Maximum number of forward table entries in a given subnet" + range 2 64 + default 2 + help + Maximum number of Forward Table entries supported by the node in a given subnet. - config BLE_MESH_MAX_DISC_TABLE_ENTRY_COUNT - int "Maximum number of discovery table entries in a given subnet" - range 2 255 - default 2 - help - Maximum number of Discovery Table entries supported by the node in a given subnet. + config BLE_MESH_MAX_DEPS_NODES_PER_PATH + int "Maximum number of dependent nodes per path" + range 2 64 + default 2 + help + Maximum size of dependent nodes list supported by each forward table entry. - config BLE_MESH_MAX_FORWARD_TABLE_ENTRY_COUNT - int "Maximum number of forward table entries in a given subnet" - range 2 64 - default 2 - help - Maximum number of Forward Table entries supported by the node in a given subnet. + config BLE_MESH_PATH_MONITOR_TEST + bool "Enable Path Monitoring test mode" + default n + help + The option only removes the Path Use timer; all other behavior of the + device is not changed. + If Path Monitoring test mode is going to be used, this option should + be enabled. - config BLE_MESH_MAX_DEPS_NODES_PER_PATH - int "Maximum number of dependent nodes per path" - range 2 64 - default 2 - help - Maximum size of dependent nodes list supported by each forward table entry. + if BLE_MESH_GATT_PROXY_SERVER + config BLE_MESH_SUPPORT_DIRECTED_PROXY + bool "Enable Directed Proxy functionality" + default y + help + Support Directed Proxy functionality. + endif - config BLE_MESH_PATH_MONITOR_TEST - bool "Enable Path Monitoring test mode" - default n - help - The option only removes the Path Use timer; all other behavior of the - device is not changed. - If Path Monitoring test mode is going to be used, this option should - be enabled. - - if BLE_MESH_GATT_PROXY_SERVER - config BLE_MESH_SUPPORT_DIRECTED_PROXY - bool "Enable Directed Proxy functionality" - default y - help - Support Directed Proxy functionality. - endif + endif # BLE_MESH_DF_SRV - endif # BLE_MESH_DF_SRV + endif # BLE_MESH_V11_SUPPORT endmenu #Support for BLE Mesh Foundation models @@ -1441,30 +1533,31 @@ if BLE_MESH config BLE_MESH_GENERIC_SERVER bool "Generic server models" - default y + default n help Enable support for Generic server models. config BLE_MESH_SENSOR_SERVER bool "Sensor server models" - default y + default n help Enable support for Sensor server models. config BLE_MESH_TIME_SCENE_SERVER bool "Time and Scenes server models" - default y + default n help Enable support for Time and Scenes server models. config BLE_MESH_LIGHTING_SERVER bool "Lighting server models" - default y + default n help Enable support for Lighting server models. config BLE_MESH_MBT_CLI bool "BLOB Transfer Client model" + depends on BLE_MESH_V11_SUPPORT default n help Enable support for BLOB Transfer Client model. @@ -1483,6 +1576,7 @@ if BLE_MESH config BLE_MESH_MBT_SRV bool "BLOB Transfer Server model" + depends on BLE_MESH_V11_SUPPORT default n help Enable support for BLOB Transfer Server model. @@ -1628,5 +1722,7 @@ if BLE_MESH Make BLE Mesh Experimental features visible. Experimental features list: - CONFIG_BLE_MESH_NOT_RELAY_REPLAY_MSG + - CONFIG_BLE_MESH_USE_BLE_50 + - CONFIG_BLE_MESH_PROXY_CLI_SRV_COEXIST endif # BLE_MESH |