diff options
Diffstat (limited to 'lib/bt/host/nimble/Kconfig.in')
| -rw-r--r-- | lib/bt/host/nimble/Kconfig.in | 659 |
1 files changed, 487 insertions, 172 deletions
diff --git a/lib/bt/host/nimble/Kconfig.in b/lib/bt/host/nimble/Kconfig.in index d02293a8..3ea05578 100644 --- a/lib/bt/host/nimble/Kconfig.in +++ b/lib/bt/host/nimble/Kconfig.in @@ -65,7 +65,7 @@ config BT_NIMBLE_LOG_LEVEL config BT_NIMBLE_MAX_CONNECTIONS int "Maximum number of concurrent connections" range 1 2 if IDF_TARGET_ESP32C2 - range 1 70 if IDF_TARGET_ESP32C6 + range 1 70 if IDF_TARGET_ESP32C6 || IDF_TARGET_ESP32C5 || IDF_TARGET_ESP32C61 range 1 35 if IDF_TARGET_ESP32H2 range 1 9 default 2 if IDF_TARGET_ESP32C2 @@ -100,6 +100,14 @@ config BT_NIMBLE_L2CAP_COC_MAX_NUM help Defines maximum number of BLE Connection Oriented Channels. When set to (0), BLE COC is not compiled in +config BT_NIMBLE_L2CAP_ENHANCED_COC + bool "L2CAP Enhanced Connection Oriented Channel" + depends on BT_NIMBLE_ENABLED && (BT_NIMBLE_L2CAP_COC_MAX_NUM >= 1) + default 0 + help + Enable Enhanced Credit Based Flow Control Mode + + choice BT_NIMBLE_PINNED_TO_CORE_CHOICE prompt "The CPU core on which NimBLE host will run" depends on BT_NIMBLE_ENABLED && !FREERTOS_UNICORE @@ -148,7 +156,7 @@ config BT_NIMBLE_ROLE_BROADCASTER depends on BT_NIMBLE_ENABLED default y help - Enables broadcaster role + Enables broadcaster role config BT_NIMBLE_ROLE_OBSERVER bool "Enable BLE Observer role" @@ -157,6 +165,20 @@ config BT_NIMBLE_ROLE_OBSERVER help Enables observer role +config BT_NIMBLE_GATT_CLIENT + bool "Enable BLE GATT Client support" + depends on BT_NIMBLE_ROLE_CENTRAL + default y + help + Enables support for GATT Client + +config BT_NIMBLE_GATT_SERVER + bool "Enable BLE GATT Server support" + depends on BT_NIMBLE_ROLE_PERIPHERAL + default y + help + Enables support for GATT Server + config BT_NIMBLE_NVS_PERSIST bool "Persist the BLE Bonding keys in NVS" depends on BT_NIMBLE_ENABLED @@ -164,6 +186,16 @@ config BT_NIMBLE_NVS_PERSIST help Enable this flag to make bonding persistent across device reboots +config BT_NIMBLE_SMP_ID_RESET + bool "Reset device identity when all bonding records are deleted" + default n + help + There are tracking risks associated with using a fixed or static IRK. + If enabled this option, NimBLE will assign a new randomly-generated IRK + when all pairing and bonding records are deleted. This would decrease the ability + of a previously paired peer to be used to determine whether a device + with which it previously shared an IRK is within range. + menuconfig BT_NIMBLE_SECURITY_ENABLE bool "Enable BLE SM feature" depends on BT_NIMBLE_ENABLED @@ -212,6 +244,20 @@ config BT_NIMBLE_SM_LVL 3. Authenticated pairing with encryption 4. Authenticated LE Secure Connections pairing with encryption using a 128-bit strength encryption key. +config BT_NIMBLE_SM_SC_ONLY + int "Enable Secure Connections Only Mode" + depends on BT_NIMBLE_SECURITY_ENABLE + default 0 + help + Enable Secure Connections Only Mode + +config BT_NIMBLE_PRINT_ERR_NAME + bool "Enable feature to print Error description" + depends on BT_NIMBLE_ENABLED + default y + help + Enable feature to give useful explanation for HCI errors + config BT_NIMBLE_DEBUG bool "Enable extra runtime asserts and host debugging" default n @@ -249,6 +295,13 @@ config BT_NIMBLE_ATT_PREFERRED_MTU This is the default value of ATT MTU indicated by the device during an ATT MTU exchange. This value can be changed using API ble_att_set_preferred_mtu() +config BT_NIMBLE_ATT_MAX_PREP_ENTRIES + int "Max Prepare write entries" + depends on BT_NIMBLE_ENABLED + default 64 + help + This is the default value of ATT Maximum prepare entries + config BT_NIMBLE_SVC_GAP_APPEARANCE hex "External appearance of the device" depends on BT_NIMBLE_ENABLED @@ -359,7 +412,7 @@ config BT_NIMBLE_GATT_MAX_PROCS config BT_NIMBLE_HS_FLOW_CTRL bool "Enable Host Flow control" - depends on BT_NIMBLE_ENABLED + depends on BT_NIMBLE_ENABLED && !SOC_ESP_NIMBLE_CONTROLLER default y if IDF_TARGET_ESP32 default n help @@ -534,6 +587,16 @@ config BT_NIMBLE_MAX_CONN_REATTEMPT help Defines maximum number of connection reattempts. +config BT_NIMBLE_HANDLE_REPEAT_PAIRING_DELETION + bool "Enable stack handling of repeat pairing" + default n + depends on BT_NIMBLE_ENABLED + help + Use this option to let stack internally handle the request for repeat pairing. + Enabling this option will delete the pairing of the device and stack will NOT post any event + to application. If this option is disabled, application will get BLE_GAP_EVENT_REPEAT_PAIRING + event. + menuconfig BT_NIMBLE_50_FEATURE_SUPPORT bool "Enable BLE 5 feature" depends on BT_NIMBLE_ENABLED && (SOC_BLE_50_SUPPORTED || !BT_CONTROLLER_ENABLED) @@ -541,111 +604,162 @@ menuconfig BT_NIMBLE_50_FEATURE_SUPPORT help Enable BLE 5 feature -config BT_NIMBLE_LL_CFG_FEAT_LE_2M_PHY - bool "Enable 2M Phy" - depends on BT_NIMBLE_50_FEATURE_SUPPORT - default y - help - Enable 2M-PHY - -config BT_NIMBLE_LL_CFG_FEAT_LE_CODED_PHY - bool "Enable coded Phy" - depends on BT_NIMBLE_50_FEATURE_SUPPORT - default y - help - Enable coded-PHY - -config BT_NIMBLE_EXT_ADV - bool "Enable extended advertising" - depends on BT_NIMBLE_50_FEATURE_SUPPORT - default n - help - Enable this option to do extended advertising. Extended advertising - will be supported from BLE 5.0 onwards. +if BT_NIMBLE_50_FEATURE_SUPPORT + config BT_NIMBLE_LL_CFG_FEAT_LE_2M_PHY + bool "Enable 2M Phy" + depends on BT_NIMBLE_50_FEATURE_SUPPORT + default y + help + Enable 2M-PHY -if BT_NIMBLE_EXT_ADV - config BT_NIMBLE_MAX_EXT_ADV_INSTANCES - int "Maximum number of extended advertising instances." - range 0 4 - default 1 if BT_NIMBLE_EXT_ADV - default 0 - depends on BT_NIMBLE_EXT_ADV + config BT_NIMBLE_LL_CFG_FEAT_LE_CODED_PHY + bool "Enable coded Phy" + depends on BT_NIMBLE_50_FEATURE_SUPPORT + default y help - Change this option to set maximum number of extended advertising - instances. Minimum there is always one instance of - advertising. Enter how many more advertising instances you - want. - For ESP32C2, ESP32C6 and ESP32H2, each extended advertising instance - will take about 0.5k DRAM. - - config BT_NIMBLE_EXT_ADV_MAX_SIZE - int "Maximum length of the advertising data." - range 0 1650 - default 1650 if BT_NIMBLE_EXT_ADV - default 0 - depends on BT_NIMBLE_EXT_ADV + Enable coded-PHY + + config BT_NIMBLE_EXT_ADV + bool "Enable extended advertising" + depends on BT_NIMBLE_50_FEATURE_SUPPORT + default n help - Defines the length of the extended adv data. The value should not - exceed 1650. + Enable this option to do extended advertising. Extended advertising + will be supported from BLE 5.0 onwards. - config BT_NIMBLE_ENABLE_PERIODIC_ADV - bool "Enable periodic advertisement." + if BT_NIMBLE_EXT_ADV + config BT_NIMBLE_EXT_ADV_V2 + bool "Enable support for extended adv v2" + default n + depends on BT_NIMBLE_EXT_ADV + help + Enable this option to use Extended Adv V2 command instead of V1. + + config BT_NIMBLE_MAX_EXT_ADV_INSTANCES + int "Maximum number of extended advertising instances." + range 0 4 + default 1 if BT_NIMBLE_EXT_ADV + default 0 + depends on BT_NIMBLE_EXT_ADV + help + Change this option to set maximum number of extended advertising + instances. Minimum there is always one instance of + advertising. Enter how many more advertising instances you + want. + For ESP32C2, ESP32C6 and ESP32H2, each extended advertising instance + will take about 0.5k DRAM. + + config BT_NIMBLE_EXT_ADV_MAX_SIZE + int "Maximum length of the advertising data." + range 0 1650 + default 1650 if BT_NIMBLE_EXT_ADV + default 0 + depends on BT_NIMBLE_EXT_ADV + help + Defines the length of the extended adv data. The value should not + exceed 1650. + + config BT_NIMBLE_ENABLE_PERIODIC_ADV + bool "Enable periodic advertisement." + default y + depends on BT_NIMBLE_EXT_ADV + help + Enable this option to start periodic advertisement. + + config BT_NIMBLE_PERIODIC_ADV_ENH + bool "Periodic adv enhancements(adi support)" + depends on BT_NIMBLE_ENABLE_PERIODIC_ADV && SOC_BLE_PERIODIC_ADV_ENH_SUPPORTED + help + Enable the periodic advertising enhancements + + config BT_NIMBLE_PERIODIC_ADV_SYNC_TRANSFER + bool "Enable Transfer Sync Events" + depends on BT_NIMBLE_ENABLE_PERIODIC_ADV + default y + help + This enables controller transfer periodic sync events to host + + config BT_NIMBLE_PERIODIC_ADV_WITH_RESPONSES + bool "Enable Periodic Advertisement with Response (EXPERIMENTAL)" + depends on BT_NIMBLE_ENABLE_PERIODIC_ADV + default n + help + This enables controller PAwR (Periodic Advertisement with Response). + endif + + config BT_NIMBLE_EXT_SCAN + bool "Enable extended scanning" + depends on BT_NIMBLE_50_FEATURE_SUPPORT && BT_NIMBLE_ROLE_OBSERVER default y - depends on BT_NIMBLE_EXT_ADV help - Enable this option to start periodic advertisement. + Enable this option to do extended scanning. - config BT_NIMBLE_PERIODIC_ADV_SYNC_TRANSFER - bool "Enable Transfer Sync Events" - depends on BT_NIMBLE_ENABLE_PERIODIC_ADV + config BT_NIMBLE_ENABLE_PERIODIC_SYNC + bool "Enable periodic sync" default y + depends on BT_NIMBLE_EXT_SCAN help - This enables controller transfer periodic sync events to host -endif - -config BT_NIMBLE_MAX_PERIODIC_SYNCS - int "Maximum number of periodic advertising syncs" - depends on BT_NIMBLE_50_FEATURE_SUPPORT - range 0 3 if IDF_TARGET_ESP32C2 - range 0 8 - default 1 if BT_NIMBLE_ENABLE_PERIODIC_ADV - default 0 - help - Set this option to set the upper limit for number of periodic sync - connections. This should be less than maximum connections allowed by - controller. - -config BT_NIMBLE_MAX_PERIODIC_ADVERTISER_LIST - int "Maximum number of periodic advertiser list" - depends on BT_NIMBLE_50_FEATURE_SUPPORT && SOC_ESP_NIMBLE_CONTROLLER - range 1 5 - default 5 if BT_NIMBLE_50_FEATURE_SUPPORT - help - Set this option to set the upper limit for number of periodic advertiser list. + Enable this option to receive periodic advertisement. + + if BT_NIMBLE_ENABLE_PERIODIC_SYNC + config BT_NIMBLE_MAX_PERIODIC_SYNCS + int "Maximum number of periodic advertising syncs" + range 0 3 if IDF_TARGET_ESP32C2 + range 0 8 + default 1 if BT_NIMBLE_ENABLE_PERIODIC_ADV + default 0 + help + Set this option to set the upper limit for number of periodic sync + connections. This should be less than maximum connections allowed by + controller. + + config BT_NIMBLE_MAX_PERIODIC_ADVERTISER_LIST + int "Maximum number of periodic advertiser list" + depends on SOC_ESP_NIMBLE_CONTROLLER + range 1 5 + default 5 if BT_NIMBLE_50_FEATURE_SUPPORT + help + Set this option to set the upper limit for number of periodic advertiser list. + endif -config BT_NIMBLE_BLE_POWER_CONTROL - bool "Enable support for BLE Power Control" - depends on BT_NIMBLE_50_FEATURE_SUPPORT && SOC_BLE_POWER_CONTROL_SUPPORTED - default n - help - Set this option to enable the Power Control feature + config BT_NIMBLE_BLE_POWER_CONTROL + bool "Enable support for BLE Power Control" + depends on BT_NIMBLE_50_FEATURE_SUPPORT && SOC_BLE_POWER_CONTROL_SUPPORTED + default n + help + Set this option to enable the Power Control feature -config BT_NIMBLE_PERIODIC_ADV_ENH - bool "Periodic adv enhancements(adi support)" - depends on BT_NIMBLE_ENABLE_PERIODIC_ADV && BT_NIMBLE_50_FEATURE_SUPPORT && SOC_BLE_PERIODIC_ADV_ENH_SUPPORTED - help - Enable the periodic advertising enhancements + config BT_NIMBLE_AOA_AOD + bool "Direction Finding" + depends on BT_NIMBLE_50_FEATURE_SUPPORT && (BT_CONTROLLER_DISABLED || SOC_BLE_CTE_SUPPORTED) + default n + help + Enable support for Connectionless and Connection Oriented Direction Finding +endif menuconfig BT_NIMBLE_GATT_CACHING bool "Enable GATT caching" - depends on BT_NIMBLE_ENABLED && BT_NIMBLE_50_FEATURE_SUPPORT + depends on BT_NIMBLE_ENABLED select BT_NIMBLE_DYNAMIC_SERVICE help Enable GATT caching +config BT_NIMBLE_GATT_CACHING_INCLUDE_SERVICES + bool "Include services in GATT caching" + depends on BT_NIMBLE_GATT_CACHING + default n + help + Enable this option to include *included services* (e.g., services referenced by other services) + in the GATT database cache. Disabling this will skip caching of included service entries. +config BT_NIMBLE_INCL_SVC_DISCOVERY + bool "Enable Included service discovery" + default y if BT_NIMBLE_GATT_CACHING_INCLUDE_SERVICES + default n + help + Enable this option to start discovery for included service. config BT_NIMBLE_GATT_CACHING_MAX_CONNS int "Maximum connections to be cached" depends on BT_NIMBLE_GATT_CACHING - default 1 + default BT_NIMBLE_MAX_CONNECTIONS help Set this option to set the upper limit on number of connections to be cached. config BT_NIMBLE_GATT_CACHING_MAX_SVCS @@ -654,6 +768,12 @@ config BT_NIMBLE_GATT_CACHING_MAX_SVCS default 64 help Set this option to set the upper limit on number of services per connection to be cached. +config BT_NIMBLE_GATT_CACHING_MAX_INCL_SVCS + int "Maximum number of included services per connection" + depends on BT_NIMBLE_GATT_CACHING + default 64 + help + Set this option to set the upper limit on number of included services per connection to be cached. config BT_NIMBLE_GATT_CACHING_MAX_CHRS int "Maximum number of characteristics per connection" depends on BT_NIMBLE_GATT_CACHING @@ -666,14 +786,22 @@ config BT_NIMBLE_GATT_CACHING_MAX_DSCS default 64 help Set this option to set the upper limit on number of descriptors per connection to be cached. +config BT_NIMBLE_GATT_CACHING_DISABLE_AUTO + bool "Do not start discovery procedure automatically upon receiving Out of Sync" + depends on BT_NIMBLE_GATT_CACHING + default n + help + When client receives ATT out-of-sync error message, it will not automatically start the discovery procedure + to correct the invalid cache. config BT_NIMBLE_WHITELIST_SIZE int "BLE white list size" depends on BT_NIMBLE_ENABLED + range 1 31 if SOC_ESP_NIMBLE_CONTROLLER range 1 15 default 12 help - BLE list size + BLE list size config BT_NIMBLE_TEST_THROUGHPUT_TEST bool "Throughput Test Mode enable" @@ -707,8 +835,172 @@ config BT_NIMBLE_BLE_GATT_BLOB_TRANSFER This option is used when data to be sent is more than 512 bytes. For peripheral role, BT_NIMBLE_MSYS_1_BLOCK_COUNT needs to be increased according to the need. -menu "GAP Service" +menu "BLE Services" + depends on BT_NIMBLE_GATT_SERVER + + config BT_NIMBLE_PROX_SERVICE + bool "Proximity service" + default y + help + Enable Proximity Service support + + config BT_NIMBLE_ANS_SERVICE + bool "Alert Notification service" + default y + help + Enable Alert Notification Service support + + config BT_NIMBLE_CTS_SERVICE + bool "Current Time Service" + default y + help + Enable Current Time Service support + + config BT_NIMBLE_HTP_SERVICE + bool "Health Thermometer service" + default y + help + Enable Health Thermometer Service support + + config BT_NIMBLE_IPSS_SERVICE + bool "Internet Protocol Support service" + default y + help + Enable Internet Protocol Service support + + config BT_NIMBLE_TPS_SERVICE + bool "Tx Power service" + default y + help + Enable Tx Power Service support + + config BT_NIMBLE_IAS_SERVICE + bool "Immediate Alert service" + default y + help + Enable Immediate Alert Service support + + config BT_NIMBLE_LLS_SERVICE + bool "Link Loss service" + default y + help + Enable Link Loss Service support + + config BT_NIMBLE_SPS_SERVICE + bool "Serial Port service" + default y + help + Enable Serial Port Service support + + config BT_NIMBLE_HR_SERVICE + bool "Heart Rate service" + default y + help + Enable HeartRate Service support + + menuconfig BT_NIMBLE_HID_SERVICE + bool "HID service" + default n + help + Enable HID service support + + config BT_NIMBLE_SVC_HID_MAX_INSTANCES + depends on BT_NIMBLE_HID_SERVICE + int "Maximum HID service instances" + default 2 + help + Defines maximum number of HID service instances + + config BT_NIMBLE_SVC_HID_MAX_RPTS + depends on BT_NIMBLE_HID_SERVICE + int "Maximum HID Report characteristics per service instance" + default 3 + help + Defines maximum number of report characteristics per service instance + + menuconfig BT_NIMBLE_BAS_SERVICE + bool "Battery service" + default y + help + Enable Battery service support + + config BT_NIMBLE_SVC_BAS_BATTERY_LEVEL_NOTIFY + depends on BT_NIMBLE_BAS_SERVICE + bool "BAS Battery Level NOTIFY permission" + help + Enable/Disable notifications on BAS Battery Level Characteristic + + menuconfig BT_NIMBLE_DIS_SERVICE + bool "DIS service" + default y + help + Enable DIS service support + + config BT_NIMBLE_SVC_DIS_MANUFACTURER_NAME + depends on BT_NIMBLE_DIS_SERVICE + bool "Manufacturer Name" + default n + help + Enable the DIS characteristic Manufacturer Name String characteristic + + config BT_NIMBLE_SVC_DIS_SERIAL_NUMBER + depends on BT_NIMBLE_DIS_SERVICE + bool "Serial Number" + default n + help + Enable the DIS Serial Number characteristic + + config BT_NIMBLE_SVC_DIS_HARDWARE_REVISION + depends on BT_NIMBLE_DIS_SERVICE + bool "Hardware Revision" + default n + help + Enable the DIS Hardware Revision characteristic + + config BT_NIMBLE_SVC_DIS_FIRMWARE_REVISION + depends on BT_NIMBLE_DIS_SERVICE + bool "Firmware Revision" + default n + help + Enable the DIS Firmware Revision characteristic + + config BT_NIMBLE_SVC_DIS_SOFTWARE_REVISION + depends on BT_NIMBLE_DIS_SERVICE + bool "Software Revision" + default n + help + Enable the DIS Software Revision characteristic + + config BT_NIMBLE_SVC_DIS_SYSTEM_ID + depends on BT_NIMBLE_DIS_SERVICE + bool "System ID" + default n + help + Enable the DIS System ID characteristic + + config BT_NIMBLE_SVC_DIS_PNP_ID + depends on BT_NIMBLE_DIS_SERVICE + bool "PnP ID" + default n + help + Enable the DIS PnP ID characteristic + + config BT_NIMBLE_SVC_DIS_INCLUDED + depends on BT_NIMBLE_DIS_SERVICE + bool "DIS as an Included Service" + default n + help + Use DIS as an included service + + menuconfig BT_NIMBLE_GAP_SERVICE + bool "GAP Service" + default y + help + Enable GAP Service support + menu "GAP Appearance write permissions" + depends on BT_NIMBLE_GAP_SERVICE + config BT_NIMBLE_SVC_GAP_APPEAR_WRITE bool "Write" default n @@ -718,14 +1010,12 @@ menu "GAP Service" config BT_NIMBLE_SVC_GAP_APPEAR_WRITE_ENC depends on BT_NIMBLE_SVC_GAP_APPEAR_WRITE bool "Write with encryption" - default n help Enable write with encryption permission (BLE_GATT_CHR_F_WRITE_ENC) config BT_NIMBLE_SVC_GAP_APPEAR_WRITE_AUTHEN depends on BT_NIMBLE_SVC_GAP_APPEAR_WRITE bool "Write with authentication" - default n help Enable write with authentication permission (BLE_GATT_CHR_F_WRITE_AUTHEN) @@ -735,48 +1025,49 @@ menu "GAP Service" default n help Enable write with authorisation permission (BLE_GATT_CHR_F_WRITE_AUTHOR) - endmenu - config BT_NIMBLE_SVC_GAP_APPEAR_WRITE_PERM - int - default 0 if !BT_NIMBLE_SVC_GAP_APPEAR_WRITE - default 8 if BT_NIMBLE_SVC_GAP_APPEAR_WRITE - - config BT_NIMBLE_SVC_GAP_APPEAR_WRITE_PERM_ENC - int - default 0 if !BT_NIMBLE_SVC_GAP_APPEAR_WRITE_ENC - default 4096 if BT_NIMBLE_SVC_GAP_APPEAR_WRITE_ENC - - config BT_NIMBLE_SVC_GAP_APPEAR_WRITE_PERM_ATHN - int - default 0 if !BT_NIMBLE_SVC_GAP_APPEAR_WRITE_AUTHEN - default 8192 if BT_NIMBLE_SVC_GAP_APPEAR_WRITE_AUTHEN - - config BT_NIMBLE_SVC_GAP_APPEAR_WRITE_PERM_ATHR - int - default 0 if !BT_NIMBLE_SVC_GAP_APPEAR_WRITE_AUTHOR - default 16384 if BT_NIMBLE_SVC_GAP_APPEAR_WRITE_AUTHOR + config BT_NIMBLE_SVC_GAP_APPEAR_WRITE_PERM + int + default 0 if !BT_NIMBLE_SVC_GAP_APPEAR_WRITE + default 8 if BT_NIMBLE_SVC_GAP_APPEAR_WRITE + + config BT_NIMBLE_SVC_GAP_APPEAR_WRITE_PERM_ENC + int + default 0 if !BT_NIMBLE_SVC_GAP_APPEAR_WRITE_ENC + default 4096 if BT_NIMBLE_SVC_GAP_APPEAR_WRITE_ENC + + config BT_NIMBLE_SVC_GAP_APPEAR_WRITE_PERM_ATHN + int + default 0 if !BT_NIMBLE_SVC_GAP_APPEAR_WRITE_AUTHEN + default 8192 if BT_NIMBLE_SVC_GAP_APPEAR_WRITE_AUTHEN + + config BT_NIMBLE_SVC_GAP_APPEAR_WRITE_PERM_ATHR + int + default 0 if !BT_NIMBLE_SVC_GAP_APPEAR_WRITE_AUTHOR + default 16384 if BT_NIMBLE_SVC_GAP_APPEAR_WRITE_AUTHOR + endmenu choice BT_NIMBLE_SVC_GAP_CENT_ADDR_RESOLUTION prompt "GAP Characteristic - Central Address Resolution" + depends on BT_NIMBLE_GAP_SERVICE default BT_NIMBLE_SVC_GAP_CAR_CHAR_NOT_SUPP help - Weather or not Central Address Resolution characteristic is supported on - the device, and if supported, weather or not Central Address Resolution - is supported. + Weather or not Central Address Resolution characteristic is supported on + the device, and if supported, weather or not Central Address Resolution + is supported. - - Central Address Resolution characteristic not supported - - Central Address Resolution not supported - - Central Address Resolution supported + - Central Address Resolution characteristic not supported + - Central Address Resolution not supported + - Central Address Resolution supported - config BT_NIMBLE_SVC_GAP_CAR_CHAR_NOT_SUPP - bool "Characteristic not supported" + config BT_NIMBLE_SVC_GAP_CAR_CHAR_NOT_SUPP + bool "Characteristic not supported" - config BT_NIMBLE_SVC_GAP_CAR_NOT_SUPP - bool "Central Address Resolution not supported" + config BT_NIMBLE_SVC_GAP_CAR_NOT_SUPP + bool "Central Address Resolution not supported" - config BT_NIMBLE_SVC_GAP_CAR_SUPP - bool "Central Address Resolution supported" + config BT_NIMBLE_SVC_GAP_CAR_SUPP + bool "Central Address Resolution supported" endchoice config BT_NIMBLE_SVC_GAP_CENT_ADDR_RESOLUTION @@ -785,7 +1076,9 @@ menu "GAP Service" default 0 if BT_NIMBLE_SVC_GAP_CAR_NOT_SUPP default 1 if BT_NIMBLE_SVC_GAP_CAR_SUPP + menu "GAP device name write permissions" + depends on BT_NIMBLE_GAP_SERVICE config BT_NIMBLE_SVC_GAP_NAME_WRITE bool "Write" default n @@ -814,6 +1107,40 @@ menu "GAP Service" Enable write with authorisation permission (BLE_GATT_CHR_F_WRITE_AUTHOR) endmenu + menu "PPCP settings" + depends on BT_NIMBLE_GAP_SERVICE + config BT_NIMBLE_SVC_GAP_PPCP_MAX_CONN_INTERVAL + int "PPCP Connection Interval Max (Unit: 1.25 ms)" + depends on BT_NIMBLE_ROLE_PERIPHERAL && BT_NIMBLE_GAP_SERVICE + default 0 + help + Peripheral Preferred Connection Parameter: Connection Interval maximum value + Interval Max = value * 1.25 ms + + config BT_NIMBLE_SVC_GAP_PPCP_MIN_CONN_INTERVAL + int "PPCP Connection Interval Min (Unit: 1.25 ms)" + depends on BT_NIMBLE_ROLE_PERIPHERAL && BT_NIMBLE_GAP_SERVICE + default 0 + help + Peripheral Preferred Connection Parameter: Connection Interval minimum value + Interval Min = value * 1.25 ms + + config BT_NIMBLE_SVC_GAP_PPCP_SLAVE_LATENCY + int "PPCP Slave Latency" + depends on BT_NIMBLE_GAP_SERVICE + default 0 + help + Peripheral Preferred Connection Parameter: Slave Latency + + config BT_NIMBLE_SVC_GAP_PPCP_SUPERVISION_TMO + int "PPCP Supervision Timeout (Uint: 10 ms)" + depends on BT_NIMBLE_GAP_SERVICE + default 0 + help + Peripheral Preferred Connection Parameter: Supervision Timeout + Timeout = Value * 10 ms + endmenu + config BT_NIMBLE_SVC_GAP_NAME_WRITE_PERM int default 0 if !BT_NIMBLE_SVC_GAP_NAME_WRITE @@ -834,58 +1161,18 @@ menu "GAP Service" default 0 if !BT_NIMBLE_SVC_GAP_NAME_WRITE_AUTHOR default 16384 if BT_NIMBLE_SVC_GAP_NAME_WRITE_AUTHOR - config BT_NIMBLE_SVC_GAP_PPCP_MAX_CONN_INTERVAL - int "PPCP Connection Interval Max (Unit: 1.25 ms)" - depends on BT_NIMBLE_ROLE_PERIPHERAL - default 0 - help - Peripheral Preferred Connection Parameter: Connection Interval maximum value - Interval Max = value * 1.25 ms - - config BT_NIMBLE_SVC_GAP_PPCP_MIN_CONN_INTERVAL - int "PPCP Connection Interval Min (Unit: 1.25 ms)" - depends on BT_NIMBLE_ROLE_PERIPHERAL - default 0 - help - Peripheral Preferred Connection Parameter: Connection Interval minimum value - Interval Min = value * 1.25 ms - - config BT_NIMBLE_SVC_GAP_PPCP_SLAVE_LATENCY - int "PPCP Slave Latency" - default 0 - help - Peripheral Preferred Connection Parameter: Slave Latency - - config BT_NIMBLE_SVC_GAP_PPCP_SUPERVISION_TMO - int "PPCP Supervision Timeout (Uint: 10 ms)" - default 0 - help - Peripheral Preferred Connection Parameter: Supervision Timeout - Timeout = Value * 10 ms - -endmenu - -menu "BLE Services" - menuconfig BT_NIMBLE_HID_SERVICE - bool "HID service" - depends on BT_NIMBLE_ENABLED + config BT_NIMBLE_SVC_GAP_GATT_SECURITY_LEVEL + bool "LE GATT Security Level Characteristic" default n help - Enable HID service support + Enable the LE GATT Security Level Characteristic - config BT_NIMBLE_SVC_HID_MAX_INSTANCES - depends on BT_NIMBLE_HID_SERVICE - int "Maximum HID service instances" - default 2 + config BT_NIMBLE_SVC_GAP_RPA_ONLY + bool "Resolvable Private Address Only characteristic" + default n help - Defines maximum number of HID service instances + Enable the Resolvable Private Address Only characteristic - config BT_NIMBLE_SVC_HID_MAX_RPTS - depends on BT_NIMBLE_HID_SERVICE - int "Maximum HID Report characteristics per service instance" - default 3 - help - Defines maximum number of report characteristics per service instance endmenu config BT_NIMBLE_VS_SUPPORT @@ -906,7 +1193,6 @@ config BT_NIMBLE_OPTIMIZE_MULTI_CONN config BT_NIMBLE_ENC_ADV_DATA bool "Encrypted Advertising Data" - select BT_NIMBLE_EXT_ADV help This option is used to enable encrypted advertising data. @@ -923,6 +1209,12 @@ config BT_NIMBLE_HIGH_DUTY_ADV_ITVL help This enable BLE high duty advertising interval feature +config BT_NIMBLE_HOST_ALLOW_CONNECT_WITH_SCAN + bool "Allow Connections with scanning in progress" + depends on BT_NIMBLE_ENABLED && !(IDF_TARGET_ESP32C2) + help + This enables support for user to initiate a new connection with scan in progress + config BT_NIMBLE_HOST_QUEUE_CONG_CHECK bool "BLE queue congestion check" depends on BT_NIMBLE_ENABLED @@ -932,6 +1224,15 @@ config BT_NIMBLE_HOST_QUEUE_CONG_CHECK or application layer handling adv packets is slow, it will cause the controller memory to run out. if enabled, adv packets will be lost when host queue is congested. +config BT_NIMBLE_GATTC_PROC_PREEMPTION_PROTECT + bool "Gatt-proc preemption protect check" + depends on BT_NIMBLE_ENABLED + default n + help + When BLE and Wireless protocol/IEEE 802.15.4 operate in coexistence, BLE preemption + can disrupt the GATT context,causing the service discovery callback to not be invoked. + A temporary list is maintained to preserve the GATT context and use it in case of preemption. + menu "Host-controller Transport" config BT_NIMBLE_TRANSPORT_UART bool "Enable Uart Transport" @@ -1048,3 +1349,17 @@ menu "Host-controller Transport" help UART HCI CTS pin endmenu + +config BT_NIMBLE_EATT_CHAN_NUM + int "Maximum number of EATT channels" + default 0 + depends on BT_NIMBLE_ENABLED + help + Defines the number of channels EATT bearers can use + +config BT_NIMBLE_SUBRATE + bool "Enable Subrate Change" + default n + depends on BT_NIMBLE_ENABLED + help + Enable connection subrate change feature |