1 files changed, 0 insertions, 97 deletions
diff --git a/src/drivers/battery.cpp b/src/drivers/battery.cpp
deleted file mode 100644
index 1755fd64..00000000
--- a/src/drivers/battery.cpp
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright 2023 jacqueline <me@jacqueline.id.au>
- *
- * SPDX-License-Identifier: GPL-3.0-only
- */
-
-#include "battery.hpp"
-#include <cstdint>
-
-#include "esp_adc/adc_cali.h"
-#include "esp_adc/adc_cali_scheme.h"
-#include "esp_adc/adc_oneshot.h"
-#include "hal/adc_types.h"
-
-namespace drivers {
-
-/*
- * Battery voltage, in millivolts, at which the battery charger IC will stop
- * charging.
- */
-static const uint32_t kFullChargeMilliVolts = 4200;
-
-/*
- * Battery voltage, in millivolts, at which *we* will consider the battery to
- * be completely discharged. This is intentionally higher than the charger IC
- * cut-off and the protection on the battery itself; we want to make sure we
- * finish up and have everything unmounted and snoozing before the BMS cuts us
- * off.
- */
-static const uint32_t kEmptyChargeMilliVolts = 3200;  // BMS limit is 3100.
-
-static const adc_bitwidth_t kAdcBitWidth = ADC_BITWIDTH_12;
-static const adc_unit_t kAdcUnit = ADC_UNIT_1;
-// Max battery voltage should be a little over 2V due to our divider, so we need
-// the max attenuation to properly handle the full range.
-static const adc_atten_t kAdcAttenuation = ADC_ATTEN_DB_11;
-// Corresponds to SENSOR_VP.
-static const adc_channel_t kAdcChannel = ADC_CHANNEL_0;
-
-Battery::Battery() {
-  adc_oneshot_unit_init_cfg_t unit_config = {
-      .unit_id = kAdcUnit,
-  };
-  ESP_ERROR_CHECK(adc_oneshot_new_unit(&unit_config, &adc_handle_));
-
-  adc_oneshot_chan_cfg_t channel_config = {
-      .atten = kAdcAttenuation,
-      .bitwidth = kAdcBitWidth,
-  };
-  ESP_ERROR_CHECK(
-      adc_oneshot_config_channel(adc_handle_, kAdcChannel, &channel_config));
-
-  // calibrate
-  // TODO: compile-time assert our scheme is available
-  adc_cali_line_fitting_config_t calibration_config = {
-      .unit_id = kAdcUnit,
-      .atten = kAdcAttenuation,
-      .bitwidth = kAdcBitWidth,
-  };
-  ESP_ERROR_CHECK(adc_cali_create_scheme_line_fitting(
-      &calibration_config, &adc_calibration_handle_));
-
-  UpdatePercent();
-}
-
-Battery::~Battery() {
-  adc_cali_delete_scheme_line_fitting(adc_calibration_handle_);
-  ESP_ERROR_CHECK(adc_oneshot_del_unit(adc_handle_));
-}
-
-auto Battery::Millivolts() -> uint32_t {
-  // GPIO 34
-  int raw = 0;
-  ESP_ERROR_CHECK(adc_oneshot_read(adc_handle_, kAdcChannel, &raw));
-
-  int voltage = 0;
-  ESP_ERROR_CHECK(
-      adc_cali_raw_to_voltage(adc_calibration_handle_, raw, &voltage));
-
-  // Voltage divider halves the battery voltage to get it into the ADC's range.
-  return voltage * 2;
-}
-
-auto Battery::UpdatePercent() -> bool {
-  auto old_percent = percent_;
-  // FIXME: So what we *should* do here is measure the actual real-life
-  // time from full battery -> empty battery, store it in NVS, then rely on
-  // that. If someone could please do this, it would be lovely. Thanks!
-  uint32_t mV = std::max(Millivolts(), kEmptyChargeMilliVolts);
-  percent_ = static_cast<uint_fast8_t>(std::min<double>(
-      std::max<double>(0.0, mV - kEmptyChargeMilliVolts) /
-          (kFullChargeMilliVolts - kEmptyChargeMilliVolts) * 100.0,
-      100.0));
-  return old_percent != percent_;
-}
-
-}  // namespace drivers