4 files changed, 29 insertions, 9 deletions
diff --git a/src/drivers/i2s_dac.cpp b/src/drivers/i2s_dac.cpp
index 4fe939f5..af2125a6 100644
--- a/src/drivers/i2s_dac.cpp
+++ b/src/drivers/i2s_dac.cpp
@@ -12,6 +12,7 @@
 #include <cmath>
 #include <cstdint>
 #include <cstring>
+#include <mutex>
 
 #include "assert.h"
 #include "driver/i2c.h"
@@ -100,11 +101,14 @@ I2SDac::~I2SDac() {
 }
 
 auto I2SDac::Start() -> void {
+  std::lock_guard<std::mutex> lock(configure_mutex_);
+
+  gpio_->WriteSync(IGpios::Pin::kAmplifierUnmute, false);
   // Ramp up the amplifier power supply.
   gpio_->WriteSync(IGpios::Pin::kAmplifierEnable, true);
 
   // Wait for voltage to stabilise
-  vTaskDelay(pdMS_TO_TICKS(1));
+  vTaskDelay(pdMS_TO_TICKS(5));
 
   // Ensure the DAC powers up to a muted state.
   wm8523::WriteRegister(wm8523::Register::kPsCtrl, 0b10);
@@ -112,26 +116,40 @@ auto I2SDac::Start() -> void {
   // Enable MCLK; this has the side effect of triggering the DAC's startup
   // sequence.
   i2s_channel_enable(i2s_handle_);
+  i2s_active_ = true;
 
   // Wait for DAC output lines to stabilise
-  vTaskDelay(pdMS_TO_TICKS(1));
+  vTaskDelay(pdMS_TO_TICKS(5));
 
-  // FIXME: Pull the amp's EN pin here.
   wm8523::WriteRegister(wm8523::Register::kPsCtrl, 0b11);
-  i2s_active_ = true;
+
+  vTaskDelay(pdMS_TO_TICKS(5));
+  gpio_->WriteSync(IGpios::Pin::kAmplifierUnmute, true);
 }
 
 auto I2SDac::Stop() -> void {
+  std::lock_guard<std::mutex> lock(configure_mutex_);
+
+  // Mute the DAC.
+  wm8523::WriteRegister(wm8523::Register::kPsCtrl, 0b10);
+  vTaskDelay(pdMS_TO_TICKS(5));
+  // Silence the output.
+  gpio_->WriteSync(IGpios::Pin::kAmplifierUnmute, false);
+
+  vTaskDelay(pdMS_TO_TICKS(5));
+
+  // Turn everything off.
   wm8523::WriteRegister(wm8523::Register::kPsCtrl, 0b0);
   i2s_channel_disable(i2s_handle_);
+  i2s_active_ = false;
 
   gpio_->WriteSync(IGpios::Pin::kAmplifierEnable, false);
-
-  i2s_active_ = false;
 }
 
 auto I2SDac::Reconfigure(Channels ch, BitsPerSample bps, SampleRate rate)
     -> void {
+  std::lock_guard<std::mutex> lock(configure_mutex_);
+
   if (i2s_active_) {
     // Ramp down into mute instead of just outright stopping to minimise any
     // clicks and pops.
diff --git a/src/drivers/include/gpios.hpp b/src/drivers/include/gpios.hpp
index fe330e3b..18f71551 100644
--- a/src/drivers/include/gpios.hpp
+++ b/src/drivers/include/gpios.hpp
@@ -54,7 +54,8 @@ class IGpios {
     kPhoneDetect = 8,
     kAmplifierEnable = 9,
     kSdCardDetect = 10,
-    // 11 through 15 are unused
+    kAmplifierUnmute = 11,
+    // 12 through 15 are unused
   };
 
   /* Nicer value names for use with kSdMuxSwitch. */
diff --git a/src/drivers/include/i2s_dac.hpp b/src/drivers/include/i2s_dac.hpp
index 889ba68c..c7faed2f 100644
--- a/src/drivers/include/i2s_dac.hpp
+++ b/src/drivers/include/i2s_dac.hpp
@@ -73,6 +73,7 @@ class I2SDac {
   i2s_chan_handle_t i2s_handle_;
   bool i2s_active_;
   StreamBufferHandle_t buffer_;
+  std::mutex configure_mutex_;
 
   i2s_std_clk_config_t clock_config_;
   i2s_std_slot_config_t slot_config_;
diff --git a/src/system_fsm/booting.cpp b/src/system_fsm/booting.cpp
index 78653592..33ed39d1 100644
--- a/src/system_fsm/booting.cpp
+++ b/src/system_fsm/booting.cpp
@@ -80,8 +80,8 @@ auto Booting::entry() -> void {
                                              true, NULL, battery_timer_cb);
   xTimerStart(battery_timer, portMAX_DELAY);
 
-  ESP_LOGI(kTag, "starting bluetooth");
-  sBluetooth.reset(new drivers::Bluetooth(sNvs.get()));
+  // ESP_LOGI(kTag, "starting bluetooth");
+  // sBluetooth.reset(new drivers::Bluetooth(sNvs.get()));
   // sBluetooth->Enable();
 
   // At this point we've done all of the essential boot tasks. Start remaining