| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This allows you to use the touch wheel for quick playback control:
- bottom quadrant for play/pause
- left and right quadrant for track skip back / forward
- top quadrant to seek back 25 seconds (handy when listening
to a podcast)
|
|
Splits the control scheme into separate schemes for the side buttons and touchwheel, allowing them to be configured independently of each other. At least one input must be used for navigation, and there are guards to prevent locking oneself out of any input. If the input scheme is invalid, a pop up will show alerting the user.
Different behaviours can be bound to the side buttons for when the device is locked or unlocked. This PR also adds a mode for these buttons that controls media playback (prev/next on up/down, pressing both buttons toggles play/pause).
There are some changes to the way inputs handle locking. Rather than the input devices tracking the current locked mode, different input devices are created on lock depending on the mode that is configured.
Reviewed-on: https://codeberg.org/cool-tech-zone/tangara-fw/pulls/264
Co-authored-by: ailurux <ailurux@noreply.codeberg.org>
Co-committed-by: ailurux <ailurux@noreply.codeberg.org>
|
|
columns' (#302) from display_padding into main
Reviewed-on: https://codeberg.org/cool-tech-zone/tangara-fw/pulls/302
|
|
|
|
This change introduces the ability to enable or disable the spoken interface/TTS from the on-device settings, either via the UI or the Lua console. This closes out the implementation of issue #245.
The TTS setting is only visible in Display settings if voice samples are present in `/.tangara-tts/` on the SD card.
Playback of new TTS voice samples is inhibited when TTS is disabled. By default, the setting is enabled, as the device will only play back TTS voices if samples are present on disk.
If you need samples to test TTS on your device, feel free to grab the voice samples I have at https://codeberg.org/tursiae/tangara-tts-samples. There's about 80-85% coverage of the UI, with the remainder to be added soonish.
Reviewed-on: https://codeberg.org/cool-tech-zone/tangara-fw/pulls/251
Co-authored-by: Tursiae <git@tursiae.org>
Co-committed-by: Tursiae <git@tursiae.org>
|
|
haptics (#246)
This adds a way for feedback devices to respond to events from outside of LVGL's event system, being passed from input device to feedback device through a vector. This was done so that touch events and long-press triggers can now give feedback through haptics.
This PR also adds haptic modes, saved in nvs similarly to input and locked input modes, to disable or change the haptic effect behaviour based on which mode is selected.
Finally, this also fixes a bug in which some click events would not trigger haptics, at the expense of re-introducing the (undesired?) behaviour of clicking a button that transitions to a new screen causing a double click.
Relevant issues this should close: #195, #233, and (partially?) #120
Reviewed-on: https://codeberg.org/cool-tech-zone/tangara-fw/pulls/246
Co-authored-by: ailurux <ailuruxx@gmail.com>
Co-committed-by: ailurux <ailuruxx@gmail.com>
|
|
|
|
This adds a new Controls setting for adjusting the behavior
when locked, and an option for allowing volume control.
|
|
This is just the plumbing of the new setting. The input methods will
come in subsequent patches.
|
|
It turns out that our error prone method of managing nvs keys has led to
an error!
We took a look over the other keys here and it didn't look like any
others were missing.
Fixes #204
|
|
This replaces the previous system of a separate track and queue repeat, with a RepeatMode type with the following options and behaviours:
- OFF: No repeat, queue or track. When the current queue finishes, shuffled or otherwise, playback will stop.
- REPEAT_TRACK: The current track will loop indefinitely, unless next is explicitly called through some user action (ie using the next button in the now playing screen)
- REPEAT_QUEUE: The entire queue will repeat indefinitely. When shuffled is enabled this will repeat the queue with new combinations each cycle.
The repeat mode is persisted in non-volatile storage, so the behaviour will be consistent throughout restarts and queue replacements, and so the "queue repeat by default" use case can be met in this way.
In addition, I've made it work a little nicer when the queue runs out in the now playing screen, keeping the previously played track shown and playback can be continued by using the play button or by going to a previous song in the queue.
Reviewed-on: https://codeberg.org/cool-tech-zone/tangara-fw/pulls/126
Co-authored-by: ailurux <ailuruxx@gmail.com>
Co-committed-by: ailurux <ailuruxx@gmail.com>
|
|
- Themes can be loaded from disk and built-in
- Themes can be selected in a new themes menu of the settings screen
- Some touch-ups to existing themes
- The saved theme is persisted in nvs
Reviewed-on: https://codeberg.org/cool-tech-zone/tangara-fw/pulls/87
Reviewed-by: cooljqln <cooljqln@noreply.codeberg.org>
Co-authored-by: ailurux <ailuruxx@gmail.com>
Co-committed-by: ailurux <ailuruxx@gmail.com>
|
|
Mostly for debugging, but also u can toggle fast charging off and on now
|
|
It's now a bit more responsive to stuff happening, gives you more information, and remembers your previously paired devices for faster switching between them.
|
|
|
|
|
|
|
|
|
|
|
|
- Don't allow adjusting volume if there's no device
- Cap bt nvs values correctly
- Persist bt volumes correctly even when the encoded for has a null
byte (facepalm 4 me)
|
|
|
|
|
|
|
|
|
|
|
|
Includes refactoring nvs settings to be a bit less duplicated
|
|
|
|
|
|
|
|
connecting and disconnecting is a bit more consistent now!
|
|
i will use this to do a sneaky trick; in-place upgrading brendan,
hailey, and erin's devices
|
|
|
|
|
|
|
|
Everything relevant is back in internal ram, and likely to stay there.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
