From c8e79a926620e48830778714cfe4b2ea2453fcaf Mon Sep 17 00:00:00 2001
From: jacqueline <me@jacqueline.id.au>
Date: Fri, 25 Jul 2025 13:33:07 +1000
Subject: Update forked idf components

---
 lib/bt/common/Kconfig.in | 134 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 134 insertions(+)

(limited to 'lib/bt/common/Kconfig.in')

diff --git a/lib/bt/common/Kconfig.in b/lib/bt/common/Kconfig.in
index 6b19dd8e..ff1947a3 100644
--- a/lib/bt/common/Kconfig.in
+++ b/lib/bt/common/Kconfig.in
@@ -1,6 +1,140 @@
 config BT_ALARM_MAX_NUM
     int "Maximum number of Bluetooth alarms"
     default 50
+    depends on (BT_BLUEDROID_ENABLED || BT_NIMBLE_ENABLED)
     help
         This option decides the maximum number of alarms which
         could be used by Bluetooth host.
+
+config BT_BLE_LOG_SPI_OUT_ENABLED
+    bool "Output ble logs to SPI bus (Experimental)"
+    default n
+    help
+        Output ble logs to SPI bus
+
+config BT_BLE_LOG_SPI_OUT_UL_TASK_BUF_SIZE
+    int "SPI transaction buffer size for upper layer task logs"
+    depends on BT_BLE_LOG_SPI_OUT_ENABLED
+    default 512
+    help
+        SPI transaction buffer size for upper layer task logs.
+        There will be 2 SPI DMA buffers with the same size.
+
+config BT_BLE_LOG_SPI_OUT_HCI_ENABLED
+    bool "Enable HCI log output to SPI"
+    depends on BT_BLE_LOG_SPI_OUT_ENABLED
+    default n
+    help
+        Enable logging of HCI packets to the SPI bus when BLE SPI log output is enabled.
+
+config BT_BLE_LOG_SPI_OUT_HOST_ENABLED
+    bool "Enable Host log output to SPI"
+    depends on BT_BLE_LOG_SPI_OUT_ENABLED
+    default n
+    help
+        This configuration applies to the logs of both Bluedroid Host and NimBLE Host.
+        When BLE SPI log output is enabled, this option allows host logs to be transmitted via SPI.
+
+config BT_BLE_LOG_SPI_OUT_LL_ENABLED
+    bool "Enable Controller log output to SPI"
+    depends on BT_BLE_LOG_SPI_OUT_ENABLED
+    depends on BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
+    default n
+    help
+        Enable controller log output to SPI bus.
+
+config BT_BLE_LOG_SPI_OUT_LL_TASK_BUF_SIZE
+    int "SPI transaction buffer size for lower layer task logs"
+    depends on BT_BLE_LOG_SPI_OUT_LL_ENABLED
+    default 1024
+    help
+        SPI transaction buffer size for lower layer task logs.
+        There will be 2 SPI DMA buffers with the same size.
+
+config BT_BLE_LOG_SPI_OUT_LL_ISR_BUF_SIZE
+    int "SPI transaction buffer size for lower layer ISR logs"
+    depends on BT_BLE_LOG_SPI_OUT_LL_ENABLED
+    default 512
+    help
+        SPI transaction buffer size for lower layer ISR logs.
+        There will be 2 SPI DMA buffers with the same size.
+
+config BT_BLE_LOG_SPI_OUT_LL_HCI_BUF_SIZE
+    int "SPI transaction buffer size for lower layer HCI logs"
+    depends on BT_BLE_LOG_SPI_OUT_LL_ENABLED
+    default 512
+    help
+        SPI transaction buffer size for upper layer HCI logs.
+        There will be 2 SPI DMA buffers with the same size
+
+config BT_BLE_LOG_SPI_OUT_MOSI_IO_NUM
+    int "GPIO number of SPI MOSI"
+    depends on BT_BLE_LOG_SPI_OUT_ENABLED
+    default 0
+    help
+        GPIO number of SPI MOSI
+
+config BT_BLE_LOG_SPI_OUT_SCLK_IO_NUM
+    int "GPIO number of SPI SCLK"
+    depends on BT_BLE_LOG_SPI_OUT_ENABLED
+    default 1
+    help
+        GPIO number of SPI SCLK
+
+config BT_BLE_LOG_SPI_OUT_CS_IO_NUM
+    int "GPIO number of SPI CS"
+    depends on BT_BLE_LOG_SPI_OUT_ENABLED
+    default 2
+    help
+        GPIO number of SPI CS
+
+config BT_BLE_LOG_SPI_OUT_TS_SYNC_ENABLED
+    bool "Enable ble log & logic analyzer log time sync"
+    depends on BT_BLE_LOG_SPI_OUT_ENABLED
+    default y
+    help
+        Enable ble log & logic analyzer log time sync
+
+config BT_BLE_LOG_SPI_OUT_SYNC_IO_NUM
+    int "GPIO number of SYNC IO"
+    depends on BT_BLE_LOG_SPI_OUT_TS_SYNC_ENABLED
+    default 3
+    help
+        GPIO number of SYNC IO
+
+config BT_BLE_LOG_SPI_OUT_TS_SYNC_SLEEP_SUPPORT
+    bool "Enable ble log & logic analyzer log time sync sleep support"
+    depends on BT_BLE_LOG_SPI_OUT_LL_ENABLED
+    default n
+    help
+        Enable ble log & logic analyzer log time sync sleep support
+
+config BT_BLE_LOG_SPI_OUT_FLUSH_TIMER_ENABLED
+    bool "Enable periodic buffer flush out"
+    depends on BT_BLE_LOG_SPI_OUT_ENABLED
+    default n
+    help
+        Enable periodic buffer flush out
+        Not recommended when SPI receiver is unavailable
+
+config BT_BLE_LOG_SPI_OUT_FLUSH_TIMEOUT
+    int "Buffer flush out period in unit of ms"
+    depends on BT_BLE_LOG_SPI_OUT_FLUSH_TIMER_ENABLED
+    default 1000
+    help
+        Buffer flush out period in unit of ms
+
+config BT_BLE_LOG_SPI_OUT_LE_AUDIO_ENABLED
+    bool "Enable LE Audio log output to SPI"
+    depends on BT_BLE_LOG_SPI_OUT_ENABLED
+    default n
+    help
+        Enable LE Audio log output to SPI
+
+config BT_BLE_LOG_SPI_OUT_LE_AUDIO_BUF_SIZE
+    int "SPI transaction buffer size for LE Audio logs"
+    depends on BT_BLE_LOG_SPI_OUT_LE_AUDIO_ENABLED
+    default 1024
+    help
+        SPI transaction buffer size for LE Audio logs.
+        There will be 2 SPI DMA buffers with the same size.
-- 
cgit v1.2.3