From ee29c25b29eaa4fac4e897442634b69ecc8d8125 Mon Sep 17 00:00:00 2001 From: jacqueline Date: Thu, 28 Mar 2024 14:32:49 +1100 Subject: Fork ESP-IDF's bluetooth component i want better sbc encoding, and no cla will stop me --- lib/bt/include/esp32h4/include/esp_bt.h | 369 ++++++++++++++++++++++++++++ lib/bt/include/esp32h4/include/esp_bt_cfg.h | 215 ++++++++++++++++ 2 files changed, 584 insertions(+) create mode 100644 lib/bt/include/esp32h4/include/esp_bt.h create mode 100644 lib/bt/include/esp32h4/include/esp_bt_cfg.h (limited to 'lib/bt/include/esp32h4') diff --git a/lib/bt/include/esp32h4/include/esp_bt.h b/lib/bt/include/esp32h4/include/esp_bt.h new file mode 100644 index 00000000..242bc39c --- /dev/null +++ b/lib/bt/include/esp32h4/include/esp_bt.h @@ -0,0 +1,369 @@ +/* + * SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_BT_H__ +#define __ESP_BT_H__ + +#include +#include +#include "esp_err.h" +#include "sdkconfig.h" +#include "esp_task.h" + +#include "nimble/nimble_npl.h" +#include "esp_bt_cfg.h" + +#ifdef CONFIG_BT_LE_HCI_INTERFACE_USE_UART +#include "driver/uart.h" +#endif + + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief Bluetooth mode for controller enable/disable + */ + +typedef enum { + ESP_BT_MODE_IDLE = 0x00, /*!< Bluetooth is not running */ + ESP_BT_MODE_BLE = 0x01, /*!< Run BLE mode */ + ESP_BT_MODE_CLASSIC_BT = 0x02, /*!< Run Classic BT mode */ + ESP_BT_MODE_BTDM = 0x03, /*!< Run dual mode */ +} esp_bt_mode_t; + +/** + * @brief Bluetooth controller enable/disable/initialised/de-initialised status + */ + +typedef enum { + ESP_BT_CONTROLLER_STATUS_IDLE = 0, /*!< Controller is in idle state */ + ESP_BT_CONTROLLER_STATUS_INITED, /*!< Controller is in initialising state */ + ESP_BT_CONTROLLER_STATUS_ENABLED, /*!< Controller is in enabled state */ + ESP_BT_CONTROLLER_STATUS_NUM, /*!< Controller is in disabled state */ +} esp_bt_controller_status_t; + +/** + * @brief BLE tx power type + * ESP_BLE_PWR_TYPE_CONN_HDL0-8: for each connection, and only be set after connection completed. + * when disconnect, the correspond TX power is not effected. + * ESP_BLE_PWR_TYPE_ADV : for advertising/scan response. + * ESP_BLE_PWR_TYPE_SCAN : for scan. + * ESP_BLE_PWR_TYPE_DEFAULT : if each connection's TX power is not set, it will use this default value. + * if neither in scan mode nor in adv mode, it will use this default value. + * If none of power type is set, system will use ESP_PWR_LVL_P3 as default for ADV/SCAN/CONN0-9. + */ +typedef enum { + ESP_BLE_PWR_TYPE_CONN_HDL0 = 0, /*!< For connection handle 0 */ + ESP_BLE_PWR_TYPE_CONN_HDL1 = 1, /*!< For connection handle 1 */ + ESP_BLE_PWR_TYPE_CONN_HDL2 = 2, /*!< For connection handle 2 */ + ESP_BLE_PWR_TYPE_CONN_HDL3 = 3, /*!< For connection handle 3 */ + ESP_BLE_PWR_TYPE_CONN_HDL4 = 4, /*!< For connection handle 4 */ + ESP_BLE_PWR_TYPE_CONN_HDL5 = 5, /*!< For connection handle 5 */ + ESP_BLE_PWR_TYPE_CONN_HDL6 = 6, /*!< For connection handle 6 */ + ESP_BLE_PWR_TYPE_CONN_HDL7 = 7, /*!< For connection handle 7 */ + ESP_BLE_PWR_TYPE_CONN_HDL8 = 8, /*!< For connection handle 8 */ + ESP_BLE_PWR_TYPE_ADV = 9, /*!< For advertising */ + ESP_BLE_PWR_TYPE_SCAN = 10, /*!< For scan */ + ESP_BLE_PWR_TYPE_DEFAULT = 11, /*!< For default, if not set other, it will use default value */ + ESP_BLE_PWR_TYPE_NUM = 12, /*!< TYPE numbers */ +} esp_ble_power_type_t; + +/** + * @brief Bluetooth TX power level(index), it's just a index corresponding to power(dbm). + */ +typedef enum { + ESP_PWR_LVL_N27 = 0, /*!< Corresponding to -27dbm */ + ESP_PWR_LVL_N24 = 1, /*!< Corresponding to -24dbm */ + ESP_PWR_LVL_N21 = 2, /*!< Corresponding to -21dbm */ + ESP_PWR_LVL_N18 = 3, /*!< Corresponding to -18dbm */ + ESP_PWR_LVL_N15 = 4, /*!< Corresponding to -15dbm */ + ESP_PWR_LVL_N12 = 5, /*!< Corresponding to -12dbm */ + ESP_PWR_LVL_N9 = 6, /*!< Corresponding to -9dbm */ + ESP_PWR_LVL_N6 = 7, /*!< Corresponding to -6dbm */ + ESP_PWR_LVL_N3 = 8, /*!< Corresponding to -3dbm */ + ESP_PWR_LVL_N0 = 9, /*!< Corresponding to 0dbm */ + ESP_PWR_LVL_P3 = 10, /*!< Corresponding to +3dbm */ + ESP_PWR_LVL_P6 = 11, /*!< Corresponding to +6dbm */ + ESP_PWR_LVL_P9 = 12, /*!< Corresponding to +9dbm */ + ESP_PWR_LVL_P12 = 13, /*!< Corresponding to +12dbm */ + ESP_PWR_LVL_P15 = 14, /*!< Corresponding to +15dbm */ + ESP_PWR_LVL_P18 = 15, /*!< Corresponding to +18dbm */ + ESP_PWR_LVL_INVALID = 0xFF, /*!< Indicates an invalid value */ +} esp_power_level_t; + +typedef enum { + ESP_BLE_ENHANCED_PWR_TYPE_DEFAULT = 0, + ESP_BLE_ENHANCED_PWR_TYPE_ADV, + ESP_BLE_ENHANCED_PWR_TYPE_SCAN, + ESP_BLE_ENHANCED_PWR_TYPE_INIT, + ESP_BLE_ENHANCED_PWR_TYPE_CONN, + ESP_BLE_ENHANCED_PWR_TYPE_MAX, +} esp_ble_enhanced_power_type_t; + +typedef struct { + uint8_t type; + uint8_t val[6]; +} esp_ble_addr_t; + +/** + * @brief Set BLE TX power + * Connection Tx power should only be set after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @param power_level: Power level(index) corresponding to absolute value(dbm) + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_ble_tx_power_set(esp_ble_power_type_t power_type, esp_power_level_t power_level); + +/** + * @brief Get BLE TX power + * Connection Tx power should only be get after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @return >= 0 - Power level, < 0 - Invalid + */ +esp_power_level_t esp_ble_tx_power_get(esp_ble_power_type_t power_type); + + +/** + * @brief ENHANCED API for Setting BLE TX power + * Connection Tx power should only be set after connection created. + * @param power_type : The enhanced type of which tx power, could set Advertising/Connection/Default and etc + * @param handle : The handle of Advertising or Connection and the value 0 for other enhanced power types. + * @param power_level: Power level(index) corresponding to absolute value(dbm) + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_ble_tx_power_set_enhanced(esp_ble_enhanced_power_type_t power_type, uint16_t handle, esp_power_level_t power_level); + +/** + * @brief ENHANCED API of Getting BLE TX power + * Connection Tx power should only be get after connection created. + * @param power_type : The enhanced type of which tx power, could set Advertising/Connection/Default and etc + * @param handle : The handle of Advertising or Connection and the value 0 for other enhanced power types. + * @return >= 0 - Power level, < 0 - Invalid + */ +esp_power_level_t esp_ble_tx_power_get_enhanced(esp_ble_enhanced_power_type_t power_type, uint16_t handle); + +#define CONFIG_VERSION 0x20220824 +#define CONFIG_MAGIC 0x5A5AA5A5 + +/** + * @brief Controller config options, depend on config mask. + * Config mask indicate which functions enabled, this means + * some options or parameters of some functions enabled by config mask. + */ + +typedef struct { + uint32_t config_version; + uint16_t ble_ll_resolv_list_size; + uint16_t ble_hci_evt_hi_buf_count; + uint16_t ble_hci_evt_lo_buf_count; + uint8_t ble_ll_sync_list_cnt; + uint8_t ble_ll_sync_cnt; + uint16_t ble_ll_rsp_dup_list_count; + uint16_t ble_ll_adv_dup_list_count; + uint8_t ble_ll_tx_pwr_dbm; + uint64_t rtc_freq; + uint16_t ble_ll_sca; + uint8_t ble_ll_scan_phy_number; + uint16_t ble_ll_conn_def_auth_pyld_tmo; + uint8_t ble_ll_jitter_usecs; + uint16_t ble_ll_sched_max_adv_pdu_usecs; + uint16_t ble_ll_sched_direct_adv_max_usecs; + uint16_t ble_ll_sched_adv_max_usecs; + uint16_t ble_scan_rsp_data_max_len; + uint8_t ble_ll_cfg_num_hci_cmd_pkts; + uint32_t ble_ll_ctrl_proc_timeout_ms; + uint16_t nimble_max_connections; + uint8_t ble_whitelist_size; + uint16_t ble_acl_buf_size; + uint16_t ble_acl_buf_count; + uint16_t ble_hci_evt_buf_size; + uint16_t ble_multi_adv_instances; + uint16_t ble_ext_adv_max_size; + uint16_t controller_task_stack_size; + uint8_t controller_task_prio; + uint8_t controller_run_cpu; + uint8_t enable_qa_test; + uint8_t enable_bqb_test; + uint8_t enable_uart_hci; + uint8_t ble_hci_uart_port; + uint32_t ble_hci_uart_baud; + uint8_t ble_hci_uart_data_bits; + uint8_t ble_hci_uart_stop_bits; + uint8_t ble_hci_uart_flow_ctrl; + uint8_t ble_hci_uart_uart_parity; + uint8_t enable_tx_cca; + uint8_t cca_rssi_thresh; + uint8_t sleep_en; + uint8_t coex_phy_coded_tx_rx_time_limit; + uint8_t dis_scan_backoff; + uint8_t ble_scan_classify_filter_enable; + uint8_t cca_drop_mode; + int8_t cca_low_tx_pwr; + uint8_t main_xtal_freq; + uint32_t config_magic; +} esp_bt_controller_config_t; + + +#define BT_CONTROLLER_INIT_CONFIG_DEFAULT() { \ + .config_version = CONFIG_VERSION, \ + .ble_ll_resolv_list_size = CONFIG_BT_LE_LL_RESOLV_LIST_SIZE, \ + .ble_hci_evt_hi_buf_count = DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT, \ + .ble_hci_evt_lo_buf_count = DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT, \ + .ble_ll_sync_list_cnt = DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST, \ + .ble_ll_sync_cnt = DEFAULT_BT_LE_MAX_PERIODIC_SYNCS, \ + .ble_ll_rsp_dup_list_count = CONFIG_BT_LE_LL_DUP_SCAN_LIST_COUNT, \ + .ble_ll_adv_dup_list_count = CONFIG_BT_LE_LL_DUP_SCAN_LIST_COUNT, \ + .ble_ll_tx_pwr_dbm = BLE_LL_TX_PWR_DBM_N, \ + .rtc_freq = RTC_FREQ_N, \ + .ble_ll_sca = CONFIG_BT_LE_LL_SCA, \ + .ble_ll_scan_phy_number = BLE_LL_SCAN_PHY_NUMBER_N, \ + .ble_ll_conn_def_auth_pyld_tmo = BLE_LL_CONN_DEF_AUTH_PYLD_TMO_N, \ + .ble_ll_jitter_usecs = BLE_LL_JITTER_USECS_N, \ + .ble_ll_sched_max_adv_pdu_usecs = BLE_LL_SCHED_MAX_ADV_PDU_USECS_N, \ + .ble_ll_sched_direct_adv_max_usecs = BLE_LL_SCHED_DIRECT_ADV_MAX_USECS_N, \ + .ble_ll_sched_adv_max_usecs = BLE_LL_SCHED_ADV_MAX_USECS_N, \ + .ble_scan_rsp_data_max_len = DEFAULT_BT_LE_SCAN_RSP_DATA_MAX_LEN_N, \ + .ble_ll_cfg_num_hci_cmd_pkts = BLE_LL_CFG_NUM_HCI_CMD_PKTS_N, \ + .ble_ll_ctrl_proc_timeout_ms = BLE_LL_CTRL_PROC_TIMEOUT_MS_N, \ + .nimble_max_connections = DEFAULT_BT_LE_MAX_CONNECTIONS, \ + .ble_whitelist_size = DEFAULT_BT_NIMBLE_WHITELIST_SIZE, \ + .ble_acl_buf_size = DEFAULT_BT_LE_ACL_BUF_SIZE, \ + .ble_acl_buf_count = DEFAULT_BT_LE_ACL_BUF_COUNT, \ + .ble_hci_evt_buf_size = DEFAULT_BT_LE_HCI_EVT_BUF_SIZE, \ + .ble_multi_adv_instances = DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES, \ + .ble_ext_adv_max_size = DEFAULT_BT_LE_EXT_ADV_MAX_SIZE, \ + .controller_task_stack_size = NIMBLE_LL_STACK_SIZE, \ + .controller_task_prio = ESP_TASK_BT_CONTROLLER_PRIO, \ + .controller_run_cpu = 0, \ + .enable_qa_test = RUN_QA_TEST, \ + .enable_bqb_test = RUN_BQB_TEST, \ + .enable_uart_hci = HCI_UART_EN, \ + .ble_hci_uart_port = DEFAULT_BT_LE_HCI_UART_PORT, \ + .ble_hci_uart_baud = DEFAULT_BT_LE_HCI_UART_BAUD, \ + .ble_hci_uart_data_bits = DEFAULT_BT_LE_HCI_UART_DATA_BITS, \ + .ble_hci_uart_stop_bits = DEFAULT_BT_LE_HCI_UART_STOP_BITS, \ + .ble_hci_uart_flow_ctrl = DEFAULT_BT_LE_HCI_UART_FLOW_CTRL, \ + .ble_hci_uart_uart_parity = DEFAULT_BT_LE_HCI_UART_PARITY, \ + .enable_tx_cca = DEFAULT_BT_LE_TX_CCA_ENABLED, \ + .cca_rssi_thresh = 256 - DEFAULT_BT_LE_CCA_RSSI_THRESH, \ + .cca_drop_mode = 0, \ + .cca_low_tx_pwr = 0, \ + .sleep_en = NIMBLE_SLEEP_ENABLE, \ + .coex_phy_coded_tx_rx_time_limit = DEFAULT_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF, \ + .ble_scan_classify_filter_enable = 0, \ + .main_xtal_freq = CONFIG_XTAL_FREQ, \ + .config_magic = CONFIG_MAGIC, \ +} + +esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg); + +/** + * @brief Get BT controller is initialised/de-initialised/enabled/disabled + * @return status value + */ +esp_bt_controller_status_t esp_bt_controller_get_status(void); +esp_power_level_t esp_ble_tx_power_get(esp_ble_power_type_t power_type); +esp_err_t esp_bt_controller_deinit(void); +esp_err_t esp_bt_controller_enable(esp_bt_mode_t mode); +esp_err_t esp_bt_controller_disable(void); + +typedef struct esp_vhci_host_callback { + void (*notify_host_send_available)(void); /*!< callback used to notify that the host can send packet to controller */ + int (*notify_host_recv)(uint8_t *data, uint16_t len); /*!< callback used to notify that the controller has a packet to send to the host*/ +} esp_vhci_host_callback_t; + +/** @brief esp_vhci_host_check_send_available + * used for check actively if the host can send packet to controller or not. + * @return true for ready to send, false means cannot send packet + */ +bool esp_vhci_host_check_send_available(void); + +/** @brief esp_vhci_host_send_packet + * host send packet to controller + * + * Should not call this function from within a critical section + * or when the scheduler is suspended. + * + * @param data the packet point + * @param len the packet length + */ +void esp_vhci_host_send_packet(uint8_t *data, uint16_t len); + +/** @brief esp_vhci_host_register_callback + * register the vhci reference callback + * struct defined by vhci_host_callback structure. + * @param callback esp_vhci_host_callback type variable + * @return ESP_OK - success, ESP_FAIL - failed + */ +esp_err_t esp_vhci_host_register_callback(const esp_vhci_host_callback_t *callback); + +/** @brief esp_bt_controller_mem_release + * release the controller memory as per the mode + * + * This function releases the BSS, data and other sections of the controller to heap. The total size is about 70k bytes. + * + * esp_bt_controller_mem_release(mode) should be called only before esp_bt_controller_init() + * or after esp_bt_controller_deinit(). + * + * Note that once BT controller memory is released, the process cannot be reversed. It means you cannot use the bluetooth + * mode which you have released by this function. + * + * If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled) + * then do not call this function. + * + * If the app calls esp_bt_controller_enable(ESP_BT_MODE_BLE) to use BLE only then it is safe to call + * esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT) at initialization time to free unused BT Classic memory. + * + * If the mode is ESP_BT_MODE_BTDM, then it may be useful to call API esp_bt_mem_release(ESP_BT_MODE_BTDM) instead, + * which internally calls esp_bt_controller_mem_release(ESP_BT_MODE_BTDM) and additionally releases the BSS and data + * consumed by the BT/BLE host stack to heap. For more details about usage please refer to the documentation of + * esp_bt_mem_release() function + * + * @param mode : the mode want to release memory + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_mem_release(esp_bt_mode_t mode); + +/** @brief esp_bt_mem_release + * release controller memory and BSS and data section of the BT/BLE host stack as per the mode + * + * This function first releases controller memory by internally calling esp_bt_controller_mem_release(). + * Additionally, if the mode is set to ESP_BT_MODE_BTDM, it also releases the BSS and data consumed by the BT/BLE host stack to heap + * + * Note that once BT memory is released, the process cannot be reversed. It means you cannot use the bluetooth + * mode which you have released by this function. + * + * If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled) + * then do not call this function. + * + * If you never intend to use bluetooth in a current boot-up cycle, you can call esp_bt_mem_release(ESP_BT_MODE_BTDM) + * before esp_bt_controller_init or after esp_bt_controller_deinit. + * + * For example, if a user only uses bluetooth for setting the WiFi configuration, and does not use bluetooth in the rest of the product operation". + * In such cases, after receiving the WiFi configuration, you can disable/deinit bluetooth and release its memory. + * Below is the sequence of APIs to be called for such scenarios: + * + * esp_bluedroid_disable(); + * esp_bluedroid_deinit(); + * esp_bt_controller_disable(); + * esp_bt_controller_deinit(); + * esp_bt_mem_release(ESP_BT_MODE_BTDM); + * + * @param mode : the mode whose memory is to be released + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_mem_release(esp_bt_mode_t mode); + +/* Returns random static address or -1 if not present */ +extern int esp_ble_hw_get_static_addr(esp_ble_addr_t *addr); + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_BT_H__ */ diff --git a/lib/bt/include/esp32h4/include/esp_bt_cfg.h b/lib/bt/include/esp32h4/include/esp_bt_cfg.h new file mode 100644 index 00000000..768a0c6c --- /dev/null +++ b/lib/bt/include/esp32h4/include/esp_bt_cfg.h @@ -0,0 +1,215 @@ +/* + * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_BT_CFG_H__ +#define __ESP_BT_CFG_H__ + +#include +#include +#include "esp_err.h" +#include "sdkconfig.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#if CONFIG_BT_NIMBLE_ENABLED +#include "syscfg/syscfg.h" +#endif + +#define NIMBLE_LL_STACK_SIZE CONFIG_BT_LE_CONTROLLER_TASK_STACK_SIZE + +#if CONFIG_BT_NIMBLE_ENABLED + + #if CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_CODED_PHY + #define BLE_LL_SCAN_PHY_NUMBER_N (2) + #else + #define BLE_LL_SCAN_PHY_NUMBER_N (1) + #endif + + #define DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST MYNEWT_VAL(BLE_MAX_PERIODIC_ADVERTISER_LIST) + #define DEFAULT_BT_LE_MAX_PERIODIC_SYNCS MYNEWT_VAL(BLE_MAX_PERIODIC_SYNCS) + #define DEFAULT_BT_LE_MAX_CONNECTIONS MYNEWT_VAL(BLE_MAX_CONNECTIONS) + #define DEFAULT_BT_LE_ACL_BUF_SIZE MYNEWT_VAL(BLE_TRANSPORT_ACL_SIZE) + #define DEFAULT_BT_LE_ACL_BUF_COUNT MYNEWT_VAL(BLE_TRANSPORT_ACL_FROM_LL_COUNT) + #define DEFAULT_BT_LE_HCI_EVT_BUF_SIZE MYNEWT_VAL(BLE_TRANSPORT_EVT_SIZE) + #define DEFAULT_BT_LE_EXT_ADV_MAX_SIZE MYNEWT_VAL(BLE_EXT_ADV_MAX_SIZE) + #define DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES MYNEWT_VAL(BLE_MULTI_ADV_INSTANCES) + #define DEFAULT_BT_NIMBLE_WHITELIST_SIZE MYNEWT_VAL(BLE_LL_WHITELIST_SIZE) + #define DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT MYNEWT_VAL(BLE_TRANSPORT_EVT_COUNT) + #define DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT MYNEWT_VAL(BLE_TRANSPORT_EVT_DISCARDABLE_COUNT) + +#else + + #if CONFIG_BT_LE_LL_CFG_FEAT_LE_CODED_PHY + #define BLE_LL_SCAN_PHY_NUMBER_N (2) + #else + #define BLE_LL_SCAN_PHY_NUMBER_N (1) + #endif + + #if defined(CONFIG_BT_LE_MAX_PERIODIC_ADVERTISER_LIST) + #define DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST (CONFIG_BT_LE_MAX_PERIODIC_ADVERTISER_LIST) + #else + #define DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST (5) + #endif + + #if defined(CONFIG_BT_LE_MAX_PERIODIC_SYNCS) + #define DEFAULT_BT_LE_MAX_PERIODIC_SYNCS (CONFIG_BT_LE_MAX_PERIODIC_SYNCS) + #else + #define DEFAULT_BT_LE_MAX_PERIODIC_SYNCS (1) + #endif + + #if defined(CONFIG_BT_LE_MAX_CONNECTIONS) + #define DEFAULT_BT_LE_MAX_CONNECTIONS (CONFIG_BT_LE_MAX_CONNECTIONS) + #else + #define DEFAULT_BT_LE_MAX_CONNECTIONS (2) + #endif + + #if defined(CONFIG_BT_LE_ACL_BUF_SIZE) + #define DEFAULT_BT_LE_ACL_BUF_SIZE (CONFIG_BT_LE_ACL_BUF_SIZE) + #else + #define DEFAULT_BT_LE_ACL_BUF_SIZE (255) + #endif + + #if defined(CONFIG_BT_LE_ACL_BUF_COUNT) + #define DEFAULT_BT_LE_ACL_BUF_COUNT (CONFIG_BT_LE_ACL_BUF_COUNT) + #else + #define DEFAULT_BT_LE_ACL_BUF_COUNT (24) + #endif + + #if defined(CONFIG_BT_LE_HCI_EVT_BUF_SIZE) + #define DEFAULT_BT_LE_HCI_EVT_BUF_SIZE (CONFIG_BT_LE_HCI_EVT_BUF_SIZE) + #else + #define DEFAULT_BT_LE_HCI_EVT_BUF_SIZE (70) + #endif + + #if defined(CONFIG_BT_LE_EXT_ADV_MAX_SIZE) + #define DEFAULT_BT_LE_EXT_ADV_MAX_SIZE (CONFIG_BT_LE_EXT_ADV_MAX_SIZE) + #else + #define DEFAULT_BT_LE_EXT_ADV_MAX_SIZE (31) + #endif + + #if defined(CONFIG_BT_LE_MAX_EXT_ADV_INSTANCES) + #define DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES (CONFIG_BT_LE_MAX_EXT_ADV_INSTANCES) + #else + #define DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES (1) + #endif + + #if defined(CONFIG_BT_LE_WHITELIST_SIZE) + #define DEFAULT_BT_NIMBLE_WHITELIST_SIZE (CONFIG_BT_LE_WHITELIST_SIZE) + #else + #define DEFAULT_BT_NIMBLE_WHITELIST_SIZE (12) + #endif + + #if defined(CONFIG_BT_LE_HCI_EVT_HI_BUF_COUNT) + #define DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT (CONFIG_BT_LE_HCI_EVT_HI_BUF_COUNT) + #else + #define DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT (30) + #endif + + #if defined(CONFIG_BT_LE_HCI_EVT_LO_BUF_COUNT) + #define DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT (CONFIG_BT_LE_HCI_EVT_LO_BUF_COUNT) + #else + #define DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT (8) + #endif + +#endif + +#define DEFAULT_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF CONFIG_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF + +#ifdef CONFIG_BT_LE_HCI_INTERFACE_USE_UART +#define HCI_UART_EN CONFIG_BT_LE_HCI_INTERFACE_USE_UART +#else +#define HCI_UART_EN 0 // hci ram mode +#endif + +#ifdef CONFIG_BT_LE_SLEEP_ENABLE +#define NIMBLE_SLEEP_ENABLE CONFIG_BT_LE_SLEEP_ENABLE +#else +#define NIMBLE_SLEEP_ENABLE 0 +#endif + + +#ifdef CONFIG_BT_LE_TX_CCA_ENABLED + #define DEFAULT_BT_LE_TX_CCA_ENABLED (CONFIG_BT_LE_TX_CCA_ENABLED) +#else + #define DEFAULT_BT_LE_TX_CCA_ENABLED (0) +#endif + +#ifdef CONFIG_BT_LE_CCA_RSSI_THRESH + #define DEFAULT_BT_LE_CCA_RSSI_THRESH (CONFIG_BT_LE_CCA_RSSI_THRESH) +#else + #define DEFAULT_BT_LE_CCA_RSSI_THRESH (50) +#endif + +#define DEFAULT_BT_LE_SCAN_RSP_DATA_MAX_LEN_N DEFAULT_BT_LE_EXT_ADV_MAX_SIZE + + +#if HCI_UART_EN + #define DEFAULT_BT_LE_HCI_UART_TX_PIN (CONFIG_BT_LE_HCI_UART_TX_PIN) + #define DEFAULT_BT_LE_HCI_UART_RX_PIN (CONFIG_BT_LE_HCI_UART_RX_PIN) + #define DEFAULT_BT_LE_HCI_UART_PORT (CONFIG_BT_LE_HCI_UART_PORT) + #define DEFAULT_BT_LE_HCI_UART_BAUD (CONFIG_BT_LE_HCI_UART_BAUD) + #define DEFAULT_BT_LE_HCI_UART_DATA_BITS (UART_DATA_8_BITS) + #define DEFAULT_BT_LE_HCI_UART_STOP_BITS (UART_STOP_BITS_1) + #define DEFAULT_BT_LE_HCI_UART_PARITY (0) + #define DEFAULT_BT_LE_HCI_UART_TASK_STACK_SIZE (CONFIG_BT_LE_HCI_UART_TASK_STACK_SIZE) + #define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (0) +#else + #define DEFAULT_BT_LE_HCI_UART_TX_PIN (0) + #define DEFAULT_BT_LE_HCI_UART_RX_PIN (0) + #define DEFAULT_BT_LE_HCI_UART_PORT (0) + #define DEFAULT_BT_LE_HCI_UART_BAUD (0) + #define DEFAULT_BT_LE_HCI_UART_DATA_BITS (0) + #define DEFAULT_BT_LE_HCI_UART_STOP_BITS (0) + #define DEFAULT_BT_LE_HCI_UART_PARITY (0) + #define DEFAULT_BT_LE_HCI_UART_TASK_STACK_SIZE (0) + #define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (0) +#endif + +/* Unchanged configuration */ + +#define BLE_LL_CTRL_PROC_TIMEOUT_MS_N (40000) /* ms */ + +#define BLE_LL_CFG_NUM_HCI_CMD_PKTS_N (1) + +#define BLE_LL_SCHED_ADV_MAX_USECS_N (852) + +#define BLE_LL_SCHED_DIRECT_ADV_MAX_USECS_N (502) + +#define BLE_LL_SCHED_MAX_ADV_PDU_USECS_N (376) + +#define BLE_LL_SUB_VERS_NR_N (0x0000) + +#define BLE_LL_JITTER_USECS_N (16) + +#define BLE_PHY_MAX_PWR_DBM_N (10) + +#define BLE_LL_CONN_DEF_AUTH_PYLD_TMO_N (3000) + +#if CONFIG_RTC_CLK_SRC_EXT_CRYS +#define RTC_FREQ_N (32768) /* in Hz */ +#else +#define RTC_FREQ_N (32000) /* in Hz */ +#if CONFIG_RTC_CLK_SRC_EXT_OSC || CONFIG_RTC_CLK_SRC_INT_RC32K +#pragma message "RTC clock source may not available" +#endif +#endif + + +#define BLE_LL_TX_PWR_DBM_N (0) + + +#define RUN_BQB_TEST (0) +#define RUN_QA_TEST (0) +#define NIMBLE_DISABLE_SCAN_BACKOFF (0) + + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_BT_CFG_H__ */ -- cgit v1.2.3