1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
|
#include "display_init.hpp"
namespace drivers {
namespace displays {
/* Bit to use to signify we should delay after part of an init sequence */
const uint8_t kDelayBit = 0x80;
// ST7735 commands and general format from the Adafruit library for these
// displays. AFAICT it's the most complete implementation out there, and I
// really don't want to have to derive this from the datasheet myself.
// See https://github.com/adafruit/Adafruit-ST7735-Library/
// clang-format off
static const uint8_t kST7735RCommonHeader[]{
15, // 15 commands in list:
ST77XX_SWRESET, kDelayBit, // 1: Software reset, 0 args, w/delay
150, // 150 ms delay
ST77XX_SLPOUT, kDelayBit, // 2: Out of sleep mode, 0 args, w/delay
255, // 500 ms delay
ST7735_FRMCTR1, 3, // 3: Framerate ctrl - normal mode, 3 arg:
0x01, 0x2C, 0x2D, // Rate = fosc/(1x2+40) * (LINE+2C+2D)
ST7735_FRMCTR2, 3, // 4: Framerate ctrl - idle mode, 3 args:
0x01, 0x2C, 0x2D, // Rate = fosc/(1x2+40) * (LINE+2C+2D)
ST7735_FRMCTR3, 6, // 5: Framerate - partial mode, 6 args:
0x01, 0x2C, 0x2D, // Dot inversion mode
0x01, 0x2C, 0x2D, // Line inversion mode
ST7735_INVCTR, 1, // 6: Display inversion ctrl, 1 arg:
0x07, // No inversion
ST7735_PWCTR1, 3, // 7: Power control, 3 args, no delay:
0xA2,
0x02, // -4.6V
0x84, // AUTO mode
ST7735_PWCTR2, 1, // 8: Power control, 1 arg, no delay:
0xC5, // VGH25=2.4C VGSEL=-10 VGH=3 * AVDD
ST7735_PWCTR3, 2, // 9: Power control, 2 args, no delay:
0x0A, // Opamp current small
0x00, // Boost frequency
ST7735_PWCTR4, 2, // 10: Power control, 2 args, no delay:
0x8A, // BCLK/2,
0x2A, // opamp current small & medium low
ST7735_PWCTR5, 2, // 11: Power control, 2 args, no delay:
0x8A, 0xEE,
ST7735_VMCTR1, 1, // 12: Power control, 1 arg, no delay:
0x0E,
ST77XX_INVOFF, 0, // 13: Don't invert display, no args
ST77XX_MADCTL, 1, // 14: Mem access ctl (directions), 1 arg:
0xC8, // row/col addr, bottom-top refresh
ST77XX_COLMOD, 1, // 15: set color mode, 1 arg, no delay:
0x05
};
// Commands to include for the variant of the panel that has a green pull tab on
// the screen protector.
static const uint8_t kST7735RCommonGreen[]{
2, // 2 commands in list:
ST77XX_CASET, 4, // 1: Column addr set, 4 args, no delay:
0x00, 0x02, // XSTART = 0
0x00, 0x7F+0x02, // XEND = 127
ST77XX_RASET, 4, // 2: Row addr set, 4 args, no delay:
0x00, 0x01, // XSTART = 0
0x00, 0x9F+0x01};
// Commands to include for the variant of the panel that has a red pull tab on
// the screen protector.
static const uint8_t kST7735RCommonRed[]{
3, // 2 commands in list:
ST77XX_CASET, 4, // 1: Column addr set, 4 args, no delay:
0x00, 0x00, // XSTART = 0
0x00, 0x7F, // XEND = 127
ST77XX_RASET, 4, // 2: Row addr set, 4 args, no delay:
0x00, 0x00, // XSTART = 0
0x00, 0x9F,
ST77XX_MADCTL, 1,
0xC0,
};
static const uint8_t kST7735RCommonFooter[]{
4, // 4 commands in list:
ST7735_GMCTRP1, 16 , // 1: Gamma Adjustments (pos. polarity), 16 args + delay:
0x02, 0x1c, 0x07, 0x12, // (Not entirely necessary, but provides
0x37, 0x32, 0x29, 0x2d, // accurate colors)
0x29, 0x25, 0x2B, 0x39,
0x00, 0x01, 0x03, 0x10,
ST7735_GMCTRN1, 16 , // 2: Gamma Adjustments (neg. polarity), 16 args + delay:
0x03, 0x1d, 0x07, 0x06, // (Not entirely necessary, but provides
0x2E, 0x2C, 0x29, 0x2D, // accurate colors)
0x2E, 0x2E, 0x37, 0x3F,
0x00, 0x00, 0x02, 0x10,
ST77XX_NORON, kDelayBit, // 3: Normal display on, no args, w/delay
10, // 10 ms delay
ST77XX_DISPON, kDelayBit, // 4: Main screen turn on, no args w/delay
100
};
// clang-format on
const InitialisationData kST7735R = {
.num_sequences = 3,
.sequences = {kST7735RCommonHeader, kST7735RCommonRed,
kST7735RCommonFooter}};
} // namespace displays
} // namespace drivers
|
