1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
|
/*
* Copyright 2023 jacqueline <me@jacqueline.id.au>
*
* SPDX-License-Identifier: GPL-3.0-only
*/
#include "touchwheel.hpp"
#include <stdint.h>
#include <cstdint>
#include "assert.h"
#include "driver/gpio.h"
#include "driver/i2c.h"
#include "esp_err.h"
#include "esp_log.h"
#include "freertos/projdefs.h"
#include "hal/gpio_types.h"
#include "hal/i2c_types.h"
#include "i2c.hpp"
namespace drivers {
static const char* kTag = "TOUCHWHEEL";
static const uint8_t kTouchWheelAddress = 0x1C;
static const gpio_num_t kIntPin = GPIO_NUM_25;
TouchWheel::TouchWheel() {
gpio_config_t int_config{
.pin_bit_mask = 1ULL << kIntPin,
.mode = GPIO_MODE_INPUT,
.pull_up_en = GPIO_PULLUP_ENABLE,
.pull_down_en = GPIO_PULLDOWN_DISABLE,
.intr_type = GPIO_INTR_DISABLE,
};
gpio_config(&int_config);
// Configure keys 0, 1, and 2 as a wheel.
WriteRegister(SLIDER_OPTIONS, 0b11000000);
// Configure adjacent key suppression.
// Wheel keys. Set to channel 1.
WriteRegister(Register::KEY_CONTROL_BASE + 0, 0b100);
WriteRegister(Register::KEY_CONTROL_BASE + 1, 0b100);
WriteRegister(Register::KEY_CONTROL_BASE + 2, 0b100);
// Centre button. Set to channel 1.
WriteRegister(Register::KEY_CONTROL_BASE + 3, 0b100);
// Touch guard. Set as a guard, in channel 1.
WriteRegister(Register::KEY_CONTROL_BASE + 4, 0b10100);
// Unused extra keys. All disabled.
for (int i = 5; i < 12; i++) {
WriteRegister(Register::KEY_CONTROL_BASE + i, 1);
}
}
TouchWheel::~TouchWheel() {}
void TouchWheel::WriteRegister(uint8_t reg, uint8_t val) {
// Addresses <= 5 are not writeable. Make sure we don't try.
assert(reg > 5);
I2CTransaction transaction;
transaction.start()
.write_addr(kTouchWheelAddress, I2C_MASTER_WRITE)
.write_ack(reg, val)
.stop();
transaction.Execute();
}
uint8_t TouchWheel::ReadRegister(uint8_t reg) {
uint8_t res;
I2CTransaction transaction;
transaction.start()
.write_addr(kTouchWheelAddress, I2C_MASTER_WRITE)
.write_ack(reg)
.start()
.write_addr(kTouchWheelAddress, I2C_MASTER_READ)
.read(&res, I2C_MASTER_NACK)
.stop();
transaction.Execute();
return res;
}
void TouchWheel::Update() {
// Read data from device into member struct
// bool has_data = !gpio_get_level(kIntPin);
// if (!has_data) {
// return;
// }
uint8_t status = ReadRegister(Register::DETECTION_STATUS);
if (status & 0b10000000) {
// Still calibrating.
ESP_LOGW(kTag, "awaiting calibration");
return;
}
if (status & 0b01000000) {
// Probably okay, but we should keep an eye on this for development.
ESP_LOGW(kTag, "touchwheel acquisition >16ms");
}
if (status & 0b10) {
// Slider detect.
uint8_t pos = ReadRegister(Register::SLIDER_POSITION);
data_.wheel_position = pos;
}
if (status & 0b1) {
// Key detect. Note that the touchwheel keys also trigger this.
uint8_t reg = ReadRegister(Register::KEY_STATUS_A);
data_.is_button_touched = reg & 0b1000;
data_.is_wheel_touched = reg & 0b111;
} else {
data_.is_button_touched = false;
data_.is_wheel_touched = false;
}
}
TouchWheelData TouchWheel::GetTouchWheelData() const {
return data_;
}
} // namespace drivers
|
